Nazim Hussain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nazim Hussain has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Guoxin Zhang
State Key Laboratory of Water Cycle and Water Security, China Institute of Water Resources and Hydropower Research, Beijing, China
4 shared publications Haider Abbas
Research Center on Flood and Drought Disaster Prevention and Reduction, Ministry of Water Resources, Institute of Water Resources and Hydropower Research, Beijing, China
3 shared publications- Arif Ullah
State Key Laboratory of Water Cycle and Water Security, China Institute of Water Resources and Hydropower Research (IWHR), Beijing, China
2 shared publications Arifullah
2 shared publications- Hejia Wang
China Institute of Water Resources and Hydropower Research, Beijing, China
2 shared publications - Jia Liu
China Institute of Water Resources and Hydropower Research, Beijing, China
2 shared publications
Latest Publications
- Open Access
- 8 October 2026
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 85 (16) , 419
Spatial associations between urbanization, watershed runoff potential, and groundwater-depth change in a Semi-Arid Alluvial Plain, Multan, Pakistan
- 8 October 2026
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 85 (16) , 419
Open AccessSpatial associations between urbanization, watershed runoff potential, and groundwater-depth change in a Semi-Arid Alluvial Plain, Multan, Pakistan
- Open Access
- 29 July 2026
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 14, 1800920
An analytical workflow for predicting the stress dependency of the crack aperture and diameter based on the stress-dependent crack area
The patterns of crack closure are determined by the stress distribution on the crack surface. Generally, the crack closure model is characterized by the stress-dependency of the crack diameter. However, an invariable diameter is usually assumed in the current closure models. Such contradiction is resolved by introducing an analytical workflow to simultaneously predict the stress-dependency of cracked aperture and diameter based on the proposed crack area stress-dependency equation. Firstly, the crack area stress-dependency equation is validated by the single fracture model. Secondly, the analytical workflows are tested in the models with and without stress interactions, respectively. For the model with stress interactions, our result revealed that the stress interactions will significantly affect the prediction accuracy of crack aperture and diameter, especially under the shielding effect. For the model with a relatively small crack density, the stress-dependency of crack aperture and diameter can be predicted with satisfactory accuracy due to the completely cancellation of stress interactions. However, for the model with a higher crack density, the prediction accuracy will be slightly degraded by the incomplete cancellation of stress interactions, at the beginning of the closure stage. At the later stage, more cracks will close, leading to a smaller crack density and the negligible effect of stress interactions, resulting in the upgraded prediction accuracy for both aperture and diameter. Compared with conventional solutions, the prediction accuracy of our method is slightly worse for aperture but better for diameter, which demonstrates the comprehensive advantage of our proposed workflow.
- 29 July 2026
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 14, 1800920
Open AccessAn analytical workflow for predicting the stress dependency of the crack aperture and diameter based on the stress-dependent crack area
The patterns of crack closure are determined by the stress distribution on the crack surface. Generally, the crack closure model is characterized by the stress-dependency of the crack diameter. However, an invariable diameter is usually assumed in the current closure models. Such contradiction is resolved by introducing an analytical workflow to simultaneously predict the stress-dependency of cracked aperture and diameter based on the proposed crack area stress-dependency equation. Firstly, the crack area stress-dependency equation is validated by the single fracture model. Secondly, the analytical workflows are tested in the models with and without stress interactions, respectively. For the model with stress interactions, our result revealed that the stress interactions will significantly affect the prediction accuracy of crack aperture and diameter, especially under the shielding effect. For the model with a relatively small crack density, the stress-dependency of crack aperture and diameter can be predicted with satisfactory accuracy due to the completely cancellation of stress interactions. However, for the model with a higher crack density, the prediction accuracy will be slightly degraded by the incomplete cancellation of stress interactions, at the beginning of the closure stage. At the later stage, more cracks will close, leading to a smaller crack density and the negligible effect of stress interactions, resulting in the upgraded prediction accuracy for both aperture and diameter. Compared with conventional solutions, the prediction accuracy of our method is slightly worse for aperture but better for diameter, which demonstrates the comprehensive advantage of our proposed workflow.
- 29 June 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (6) , 3055-3067
A multilayer polyfluorosilicone coating system for extreme hydraulic environments: design, performance, and field validation
- 29 June 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (6) , 3055-3067
A multilayer polyfluorosilicone coating system for extreme hydraulic environments: design, performance, and field validation
- Open Access
- 7 March 2026
- Published by MDPI AG in Geotechnics
- Vol. 6 (1) , 27
Seepage-Induced Crack Opening in Cemented Joints: A Hydromechanical Study for Geotechnical Applications
Seepage through construction joints is a major factor affecting uplift pressure and long-term safety of concrete dams. Pre-existing joints with millimeter-scale openings provide preferential flow paths, where hydraulic pressure can induce joint opening and permeability escalation. In this study, seepage-induced joint-opening behavior is investigated using a coupled hydromechanical numerical framework with damage-dependent aperture evolution. The impacts of initial crack width, interface cohesiveness, and interface tensile strength on the evolution of crack opening displacement (COD) and hydraulic instability are comprehensively isolated by parametric studies. The results show that, once tensile opening is activated, variations in cohesion have a negligible influence on pressure–COD responses and failure pressure, indicating that cohesion degradation does not control seepage-induced instability in pre-existing cracks. In divergence, interface tensile strength strongly governs damage initiation, the onset of rapid crack opening, and the critical hydraulic pressure at failure. Larger initial crack widths act as geometric accelerators, leading to earlier instability and enhanced permeability evolution under increasing seepage pressure. A dimensionless, pressure–tensile strength ratio is shown to unify the observed responses, revealing a transition from a geometry-controlled regime to a damage-dominated failure regime. These findings indicate that seepage-induced instability in concrete dams is primarily controlled by tensile resistance of construction joints rather than cohesion degradation, providing guidance for uplift pressure assessment and seepage control design.
- 7 March 2026
- Published by MDPI AG in Geotechnics
- Vol. 6 (1) , 27
Open AccessSeepage-Induced Crack Opening in Cemented Joints: A Hydromechanical Study for Geotechnical Applications
Seepage through construction joints is a major factor affecting uplift pressure and long-term safety of concrete dams. Pre-existing joints with millimeter-scale openings provide preferential flow paths, where hydraulic pressure can induce joint opening and permeability escalation. In this study, seepage-induced joint-opening behavior is investigated using a coupled hydromechanical numerical framework with damage-dependent aperture evolution. The impacts of initial crack width, interface cohesiveness, and interface tensile strength on the evolution of crack opening displacement (COD) and hydraulic instability are comprehensively isolated by parametric studies. The results show that, once tensile opening is activated, variations in cohesion have a negligible influence on pressure–COD responses and failure pressure, indicating that cohesion degradation does not control seepage-induced instability in pre-existing cracks. In divergence, interface tensile strength strongly governs damage initiation, the onset of rapid crack opening, and the critical hydraulic pressure at failure. Larger initial crack widths act as geometric accelerators, leading to earlier instability and enhanced permeability evolution under increasing seepage pressure. A dimensionless, pressure–tensile strength ratio is shown to unify the observed responses, revealing a transition from a geometry-controlled regime to a damage-dominated failure regime. These findings indicate that seepage-induced instability in concrete dams is primarily controlled by tensile resistance of construction joints rather than cohesion degradation, providing guidance for uplift pressure assessment and seepage control design.
- Open Access
- 25 February 2026
- Published by Elsevier in Environmental Advances
- Vol. 24
Functional zonation of a semi-arid urban aquifer using unsupervised learning of dynamic groundwater behavior
- 25 February 2026
- Published by Elsevier in Environmental Advances
- Vol. 24
Open AccessFunctional zonation of a semi-arid urban aquifer using unsupervised learning of dynamic groundwater behavior
- Open Access
Development and Multi-Scale Evaluation of a Novel Polyfluorosilicone Triple-Layer Anti-Seepage Coating for Hydraulic Concrete
The deterioration of concrete hydraulic structures caused by chemical factors, seepage, and environmental stress necessitates advanced protective coatings that enhance durability, flexibility, and environmental sustainability. Conventional protective systems often exhibit limited durability under combined hydraulic, thermal, and chemical stress. In this study, a novel polyfluorosilicone-based coating system is presented, which integrates a deep-penetrating nano-primer for substrate reinforcement, a crack-bridging polymer intermediate layer for impermeability, and a polyfluorosilicone topcoat providing UV and weather resistance. The multilayer architecture addresses the inherent trade-offs between adhesion, flexibility, and durability observed in conventional waterproofing systems. Informed by a mechanistic study of interfacial adhesion and failure modes, the coating exhibits outstanding high mechanical and performance characteristics, including a mean pull-off bond strength of 4.56 ± 0.14 MPa for the fully cured triple-layer coating system, with cohesive failure occurring within the concrete substrate, signifying a bond stronger than the material it protects. The system withstood 2.2 MPa water pressure and 200 freeze–thaw cycles with 87.2% modulus retention, demonstrating stable mechanical and environmental durability. The coating demonstrated excellent resilience, showing no evidence of degradation after 1000 h of UV aging, 200 freeze–thaw cycles, and exposure to alkaline solutions. This water-based formulation meets green-material standards, with low volatile organic compound (VOC) levels and minimal harmful chemicals. The results validate that a multi-scale, layered design strategy effectively decouples and addresses the distinct failure mechanisms in hydraulic environments, providing a robust and sustainable solution.
Open AccessDevelopment and Multi-Scale Evaluation of a Novel Polyfluorosilicone Triple-Layer Anti-Seepage Coating for Hydraulic Concrete
The deterioration of concrete hydraulic structures caused by chemical factors, seepage, and environmental stress necessitates advanced protective coatings that enhance durability, flexibility, and environmental sustainability. Conventional protective systems often exhibit limited durability under combined hydraulic, thermal, and chemical stress. In this study, a novel polyfluorosilicone-based coating system is presented, which integrates a deep-penetrating nano-primer for substrate reinforcement, a crack-bridging polymer intermediate layer for impermeability, and a polyfluorosilicone topcoat providing UV and weather resistance. The multilayer architecture addresses the inherent trade-offs between adhesion, flexibility, and durability observed in conventional waterproofing systems. Informed by a mechanistic study of interfacial adhesion and failure modes, the coating exhibits outstanding high mechanical and performance characteristics, including a mean pull-off bond strength of 4.56 ± 0.14 MPa for the fully cured triple-layer coating system, with cohesive failure occurring within the concrete substrate, signifying a bond stronger than the material it protects. The system withstood 2.2 MPa water pressure and 200 freeze–thaw cycles with 87.2% modulus retention, demonstrating stable mechanical and environmental durability. The coating demonstrated excellent resilience, showing no evidence of degradation after 1000 h of UV aging, 200 freeze–thaw cycles, and exposure to alkaline solutions. This water-based formulation meets green-material standards, with low volatile organic compound (VOC) levels and minimal harmful chemicals. The results validate that a multi-scale, layered design strategy effectively decouples and addresses the distinct failure mechanisms in hydraulic environments, providing a robust and sustainable solution.
- Open Access
- 28 October 2025
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 62
Prevailing influence of local and global climatic factors on the propagation of meteorological to agricultural droughts and associated time lags in Pakistan
- 28 October 2025
- Published by Elsevier in Journal of Hydrology: Regional Studies
- Vol. 62
Open AccessPrevailing influence of local and global climatic factors on the propagation of meteorological to agricultural droughts and associated time lags in Pakistan