Kazimierz Opoka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kazimierz Opoka has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Józef Ciuła
Faculty of Engineering Sciences, State University of Applied Sciences in Nowy Sącz, Zamenhofa 1A, 33-300 Nowy Sącz, Poland
1 shared publication - Sławomir Kowalski
Faculty of Engineering Sciences, University of Applied Sciences in Nowy Sacz, 1a Zamenhofa Street, 33-300 Nowy Sacz, Poland
1 shared publication
Latest Publications
- Open Access
- 9 June 2022
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 24 (3) , 446-454
Analysis of the end-of-life the front suspension beam of a vehicle
The aim of the article is focused on assessing the degree of end-of-life for the vehicle front suspension beam. The first stage of the problem taken was represented by a road test of the vehicle at distance expressed by 100.000 km. Following the end of the operation tests, the suspension beam was dismantled and subjected to laboratory tests. The tests demonstrated numerous beam top layer plastic deformations, which came into being as a result of the vehicle driving onto an obstacle on the roadway or onto raised road infrastructure elements. At the point of connection of the stabiliser rod to the beam, surface degradation was noted, which consisted in the considerable change of the surface profile, hardness reduction and the grey and dark brown colour. Corrosion regions and fretting wear traces were noted. Corrosion pits, scratches and material build-ups was observed. The analysis of the chemical composition of wear products demonstrated the presence of elements such as iron, oxygen, chlorine and silicon, as an effect of operational conditions.
- 9 June 2022
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 24 (3) , 446-454
Open AccessAnalysis of the end-of-life the front suspension beam of a vehicle
The aim of the article is focused on assessing the degree of end-of-life for the vehicle front suspension beam. The first stage of the problem taken was represented by a road test of the vehicle at distance expressed by 100.000 km. Following the end of the operation tests, the suspension beam was dismantled and subjected to laboratory tests. The tests demonstrated numerous beam top layer plastic deformations, which came into being as a result of the vehicle driving onto an obstacle on the roadway or onto raised road infrastructure elements. At the point of connection of the stabiliser rod to the beam, surface degradation was noted, which consisted in the considerable change of the surface profile, hardness reduction and the grey and dark brown colour. Corrosion regions and fretting wear traces were noted. Corrosion pits, scratches and material build-ups was observed. The analysis of the chemical composition of wear products demonstrated the presence of elements such as iron, oxygen, chlorine and silicon, as an effect of operational conditions.