Jingyao Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jingyao Zheng has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Tianjie Zhao
State Key Laboratory of Remote Sensing Science, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing, China
7 shared publications - Jiancheng Shi
National Space Science Center, Chinese Academy of Sciences, Beijing, China
4 shared publications - Bertrand Bonan
Météo-France, CNRS, Univ. Toulouse, CNRM, Toulouse, France
3 shared publications En Liu
The National Key Laboratory of Water Disaster Prevention,College of Hydrology and Water Resources, Hohai University, Nanjing 210098, China
3 shared publicationsHaishen Lü
The National Key Laboratory of Water Disaster Prevention,College of Hydrology and Water Resources, Hohai University, Nanjing 210098, China
3 shared publicationsHaiting Xu
The National Key Laboratory of Water Disaster Prevention,College of Hydrology and Water Resources, Hohai University, Nanjing 210098, China
3 shared publications
Latest Publications
- Open Access
- 9 November 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (21) , 3847
A 1 km Surface Soil Moisture Product Downscaled from SMAP Using MODIS Shortwave-Infrared Reflectance for the Tibetan Plateau Validated Across Five In Situ Networks
Surface soil moisture (SSM) regulates land–atmosphere water and energy exchanges over the Tibetan Plateau (TP); yet, passive microwave SSM products, such as those from the Soil Moisture Active Passive (SMAP) mission, are limited to coarse spatial resolutions of tens of kilometers. Although various downscaling approaches have been developed using radar backscatter, thermal infrared observations, and optical–thermal indicators, the value of shortwave infrared (SWIR) reflectance—whose moisture-dependent absorption characteristics offer fine-scale soil moisture information—remains insufficiently assessed across contrasting environments. To address this gap, we developed a 1 km SSM product for 2017–2020 by downscaling 36 km MCCA-SMAP estimates over the TP, combining the normalized shortwave difference soil moisture index (NSDSI) derived from MODIS reflectance with a first-order Taylor expansion and daily sensitivity calibration. The product was evaluated against ground observations from five monitoring networks spanning diverse climatic and land surface conditions using spatial, temporal, regional-scale, and spatiotemporal comparison frameworks, and was benchmarked against three published 1 km downscaled products based on radar backscatter, diurnal temperature amplitude, and soil evaporation efficiency, respectively. Compared with the original MCCA-SMAP SSM, the spatial regression slopes of the NSDSI-based downscaled product moved closer to unity at all five networks, with spatial correlations increasing at four networks particularly at SMN-WDL (from −0.04 to 0.59) and Shiquanhe (from 0.12 to 0.44), although the near-unity slopes at Shiquanhe were sensitive to unusually high estimates at SQ11. The NSDSI-based downscaled product showed lower mean station-level temporal correlations across the five networks, whereas regional-scale temporal correlations remained nearly unchanged. Relative to the existing 1 km products, the NSDSI-based product had spatial slopes closer to unity at all networks except Maqu, although correlation and error rankings varied among networks. At Maqu, where the vegetation cover is relatively high, the NSDSI-based downscaled SSM had spatial correlations below 0.2 and exhibited lower correlations and a higher ubRMSD than the radar- and thermal inertia-based downscaled products. The resulting downscaled SSM maps preserved the broad west-to-east moisture gradient and showed finer spatial detail. These multi-network results identify improved spatial pattern representation as the principal benefit of the evaluated SWIR-assisted downscaling approach, while demonstrating that gains in spatial agreement do not necessarily improve temporal performance or reduce ubRMSD.
- 9 November 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (21) , 3847
Open AccessA 1 km Surface Soil Moisture Product Downscaled from SMAP Using MODIS Shortwave-Infrared Reflectance for the Tibetan Plateau Validated Across Five In Situ Networks
Surface soil moisture (SSM) regulates land–atmosphere water and energy exchanges over the Tibetan Plateau (TP); yet, passive microwave SSM products, such as those from the Soil Moisture Active Passive (SMAP) mission, are limited to coarse spatial resolutions of tens of kilometers. Although various downscaling approaches have been developed using radar backscatter, thermal infrared observations, and optical–thermal indicators, the value of shortwave infrared (SWIR) reflectance—whose moisture-dependent absorption characteristics offer fine-scale soil moisture information—remains insufficiently assessed across contrasting environments. To address this gap, we developed a 1 km SSM product for 2017–2020 by downscaling 36 km MCCA-SMAP estimates over the TP, combining the normalized shortwave difference soil moisture index (NSDSI) derived from MODIS reflectance with a first-order Taylor expansion and daily sensitivity calibration. The product was evaluated against ground observations from five monitoring networks spanning diverse climatic and land surface conditions using spatial, temporal, regional-scale, and spatiotemporal comparison frameworks, and was benchmarked against three published 1 km downscaled products based on radar backscatter, diurnal temperature amplitude, and soil evaporation efficiency, respectively. Compared with the original MCCA-SMAP SSM, the spatial regression slopes of the NSDSI-based downscaled product moved closer to unity at all five networks, with spatial correlations increasing at four networks particularly at SMN-WDL (from −0.04 to 0.59) and Shiquanhe (from 0.12 to 0.44), although the near-unity slopes at Shiquanhe were sensitive to unusually high estimates at SQ11. The NSDSI-based downscaled product showed lower mean station-level temporal correlations across the five networks, whereas regional-scale temporal correlations remained nearly unchanged. Relative to the existing 1 km products, the NSDSI-based product had spatial slopes closer to unity at all networks except Maqu, although correlation and error rankings varied among networks. At Maqu, where the vegetation cover is relatively high, the NSDSI-based downscaled SSM had spatial correlations below 0.2 and exhibited lower correlations and a higher ubRMSD than the radar- and thermal inertia-based downscaled products. The resulting downscaled SSM maps preserved the broad west-to-east moisture gradient and showed finer spatial detail. These multi-network results identify improved spatial pattern representation as the principal benefit of the evaluated SWIR-assisted downscaling approach, while demonstrating that gains in spatial agreement do not necessarily improve temporal performance or reduce ubRMSD.
- Open Access
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 2439-2460
A New Addition to Global Soil Moisture Mapping: CFOSAT Scatterometer Algorithm Development and Validation
The monitoring of global soil moisture is crucial for understanding the hydrological cycle and managing terrestrial water resources. The Chinese-French Oceanography Satellite (CFOSAT), equipped with the first sector-beam rotary scanning microwave scatterometer (CSCAT), provides a novel opportunity for global soil moisture mapping. However, the capability of CFOSAT's Ku-band for soil moisture retrieval remains underexplored and lacks systematic evaluation. In this study, an Adaptive Backscatter Change Tracking (ABCT) algorithm is designed to retrieve absolute soil moisture from CFOSAT's CSCAT measurements. The ABCT algorithm assumes a stable roughness, where changes in backscattering are primarily attributed to soil moisture variation based on a logarithmic relationship. It incorporates a vegetation influence coefficient, which quantifies how vegetation impacts the backscatter signal This coefficient adaptively scales with changes in the Normalized Difference Vegetation Index (NDVI) to adjust the backscattering appropriately to include the effect of vegetation growth or decay. This allows the algorithm to isolate changes in the backscatter signal that are due to soil moisture while minimizing the false readings from vegetation growth or wilting. The CFOSAT ABCT algorithm's performance was evaluated against extensive in-situ soil moisture data, demonstrating a robust correlation, with the Vertical-Vertical Polarization Ascending Orbit (VV Asc) result showing the highest accuracy, indicated by Pearson's correlation coefficient (R) of 0.68 and unbiased root mean squared error (ubRMSE) of 0.057 m3/m3. Comparative analysis with the Advanced Scatterometer (ASCAT) data revealed that, while the ABCT algorithm's correlation was slightly lower than that of the official EUMETSAT H SAF product, it notably improved the bias and ubRMSE metrics. This study underscores that the CFOSAT ABCT soil moisture retrieval algorithm and product are a valuable addition to global soil moisture mapping, complementing existing satellite missions or sensors such as SMAP, SMOS, ASCAT, AMSR2 and FY-3/MWRI.
- 17 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 19 (19391404) , 2439-2460
Open AccessA New Addition to Global Soil Moisture Mapping: CFOSAT Scatterometer Algorithm Development and Validation
The monitoring of global soil moisture is crucial for understanding the hydrological cycle and managing terrestrial water resources. The Chinese-French Oceanography Satellite (CFOSAT), equipped with the first sector-beam rotary scanning microwave scatterometer (CSCAT), provides a novel opportunity for global soil moisture mapping. However, the capability of CFOSAT's Ku-band for soil moisture retrieval remains underexplored and lacks systematic evaluation. In this study, an Adaptive Backscatter Change Tracking (ABCT) algorithm is designed to retrieve absolute soil moisture from CFOSAT's CSCAT measurements. The ABCT algorithm assumes a stable roughness, where changes in backscattering are primarily attributed to soil moisture variation based on a logarithmic relationship. It incorporates a vegetation influence coefficient, which quantifies how vegetation impacts the backscatter signal This coefficient adaptively scales with changes in the Normalized Difference Vegetation Index (NDVI) to adjust the backscattering appropriately to include the effect of vegetation growth or decay. This allows the algorithm to isolate changes in the backscatter signal that are due to soil moisture while minimizing the false readings from vegetation growth or wilting. The CFOSAT ABCT algorithm's performance was evaluated against extensive in-situ soil moisture data, demonstrating a robust correlation, with the Vertical-Vertical Polarization Ascending Orbit (VV Asc) result showing the highest accuracy, indicated by Pearson's correlation coefficient (R) of 0.68 and unbiased root mean squared error (ubRMSE) of 0.057 m3/m3. Comparative analysis with the Advanced Scatterometer (ASCAT) data revealed that, while the ABCT algorithm's correlation was slightly lower than that of the official EUMETSAT H SAF product, it notably improved the bias and ubRMSE metrics. This study underscores that the CFOSAT ABCT soil moisture retrieval algorithm and product are a valuable addition to global soil moisture mapping, complementing existing satellite missions or sensors such as SMAP, SMOS, ASCAT, AMSR2 and FY-3/MWRI.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-16
An Innovative Framework for Hourly Satellite Soil Moisture Retrieval via Integrated Spatiotemporal Downscaling Techniques
Satellite microwave remote sensing is acknowledged as the primary method for obtaining global-scale surface soil moisture (SSM) data. Typically, spaceborne microwave sensors aboard polar-orbiting satellites yield SSM estimates with a native spatial resolution of several tens of kilometers and a temporal resolution of about once or twice daily. This indicates considerable potential for enhancing both of their spatial and temporal resolutions. Although spatial downscaling of spaceborne microwave SSM has garnered significant attention recently, the enhancement of their temporal resolution has received less focus. This study pioneers a methodology for generating hourly-scale satellite SSM estimates. The developed approach integrates a novel blending module that combines geostationary satellite observations with a spatially downscaled SSM dataset derived from traditional fusion among microwave and optical observations on polar-orbiting platforms. This blending module leverages land surface temperature (LST) data from geostationary satellites, which effectively quantify SSM variations on an hourly interval upon the thermal inertia theory. Consequently, a comprehensive spatio-temporal integrated framework for SSM downscaling is established to produce hourly-scale SSM at a resolution of 6 km, enhancing upon the daily and 36-km resolutions of existing microwave SSM datasets. Validation of the downscaled hourly SSM estimates was conducted through an established ground soil moisture observatory network in North China, revealing an unbiased root mean square error (ubRMSE) of no higher than 0.04 cm³/cm³. This result confirms preservation of the fundamental accuracy of original microwave SSM retrievals and demonstrates the effectiveness of the developed framework in improving both spatial and temporal representativeness of SSM data.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-16
An Innovative Framework for Hourly Satellite Soil Moisture Retrieval via Integrated Spatiotemporal Downscaling Techniques
Satellite microwave remote sensing is acknowledged as the primary method for obtaining global-scale surface soil moisture (SSM) data. Typically, spaceborne microwave sensors aboard polar-orbiting satellites yield SSM estimates with a native spatial resolution of several tens of kilometers and a temporal resolution of about once or twice daily. This indicates considerable potential for enhancing both of their spatial and temporal resolutions. Although spatial downscaling of spaceborne microwave SSM has garnered significant attention recently, the enhancement of their temporal resolution has received less focus. This study pioneers a methodology for generating hourly-scale satellite SSM estimates. The developed approach integrates a novel blending module that combines geostationary satellite observations with a spatially downscaled SSM dataset derived from traditional fusion among microwave and optical observations on polar-orbiting platforms. This blending module leverages land surface temperature (LST) data from geostationary satellites, which effectively quantify SSM variations on an hourly interval upon the thermal inertia theory. Consequently, a comprehensive spatio-temporal integrated framework for SSM downscaling is established to produce hourly-scale SSM at a resolution of 6 km, enhancing upon the daily and 36-km resolutions of existing microwave SSM datasets. Validation of the downscaled hourly SSM estimates was conducted through an established ground soil moisture observatory network in North China, revealing an unbiased root mean square error (ubRMSE) of no higher than 0.04 cm³/cm³. This result confirms preservation of the fundamental accuracy of original microwave SSM retrievals and demonstrates the effectiveness of the developed framework in improving both spatial and temporal representativeness of SSM data.
- Open Access
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-15
A Novel Downscaling Approach Based on Multifrequency Microwave Radiometry Toward Finer Scale Global Soil Moisture Mapping
Global surface soil moisture (SSM) mapping at a 9-km intermediate resolution from microwave remote sensing could play a pivotal role in advancing detailed global hydrological investigations. Despite the wide recognition of the Soil Moisture Active Passive (SMAP) mission’s 9-km SSM products based on oversampling of the L-band radiometry, concerns persist regarding its ability to capture higher SSM heterogeneity at finer resolutions. For addressing this concern, a novel methodological framework was proposed in this study. This framework advocates the downscaling of the SMAP 36-km dataset through a fusion with high-frequency (Ka-band) passive microwave observations. The resultant 9-km all-weather SSM product, derived from this novel approach, is evaluated using ground-based measurements worldwide. The findings reveal a significantly enhanced accuracy compared to the SMAP conventional oversampling-based one, especially in areas exhibiting pronounced local variations in SSM patterns. The study therefore represents a substantial step forward, providing new insights into the design and use of a multi-frequency satellite radiometer for global SSM mapping.
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-15
Open AccessA Novel Downscaling Approach Based on Multifrequency Microwave Radiometry Toward Finer Scale Global Soil Moisture Mapping
Global surface soil moisture (SSM) mapping at a 9-km intermediate resolution from microwave remote sensing could play a pivotal role in advancing detailed global hydrological investigations. Despite the wide recognition of the Soil Moisture Active Passive (SMAP) mission’s 9-km SSM products based on oversampling of the L-band radiometry, concerns persist regarding its ability to capture higher SSM heterogeneity at finer resolutions. For addressing this concern, a novel methodological framework was proposed in this study. This framework advocates the downscaling of the SMAP 36-km dataset through a fusion with high-frequency (Ka-band) passive microwave observations. The resultant 9-km all-weather SSM product, derived from this novel approach, is evaluated using ground-based measurements worldwide. The findings reveal a significantly enhanced accuracy compared to the SMAP conventional oversampling-based one, especially in areas exhibiting pronounced local variations in SSM patterns. The study therefore represents a substantial step forward, providing new insights into the design and use of a multi-frequency satellite radiometer for global SSM mapping.
- Open Access
- 5 June 2024
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 28 (11) , 2375-2400
Evaluation of root zone soil moisture products over the Huai River basin
Root zone soil moisture (RZSM) is critical for water resource management, drought monitoring and sub-seasonal flood climate prediction. While RZSM is not directly observable from space, several RZSM products are available and widely used at global and continental scales. This study conducts a comprehensive and quantitative evaluation of eight RZSM products using observations from 58 in situ soil moisture stations over the Huai River basin (HRB) in China. Attention is drawn to the potential factors that contribute to the uncertainties of model-based RZSM, including the errors in atmospheric forcing, vegetation parameterizations, soil properties and spatial scale mismatch. The results show that the Global Land Data Assimilation System Catchment Land Surface Model (GLDAS_CLSM) outperforms the other RZSM products with the highest correlation coefficient (R= 0.69) and the lowest unbiased root mean square error (ubRMSE = 0.018 m3 m−3), while SMOS Level 4 (L4) RZSM shows the worst performance among eight RZSM products. The RZSM products based on land surface models generally perform better in the wet season than in the dry season due to the enhanced ability to capture of the temporal dynamics of in situ observations in the wet season and the inertia of remaining high soil moisture values even in the dry season, while the SMOS L4 RZSM product, derived from SMOS L3 surface moisture (SSM) combined with an exponential filter method, performs better in the dry season due to the attenuated ground microwave radiation signal caused by the increased water vapour absorption and scattering in the wet season. The underestimated SMOS L3 SSM triggers the underestimation of RZSM in SMOS L4. The overestimated RZSM products based on land surface models could be associated with the overestimated precipitation amounts and frequency, the underestimated air temperature, and the underestimated ratio of transpiration to the total terrestrial evapotranspiration. In addition, the biased soil properties and flawed vegetation parameterizations affect the hydrothermal transport processes represented in different land surface models (LSMs) and lead to inaccurate soil moisture simulation. The scale mismatch between point and footprint also introduces representative errors. The comparison of frequency of normalized soil moisture between RZSM products and in situ observations indicates that the LSMs should focus on reducing the frequency of wet soil moisture, increasing the frequency of dry soil moisture and the ability to capture the frequency peak of soil moisture. The study provides some insights into how to improve the ability of land surface models to simulate the land surface states and fluxes by taking into account the issues mentioned above. Finally, these results can be extrapolated to other regions located in similar climate zones, as they share similar precipitation patterns that dominate the terrestrial water cycle.
- 5 June 2024
- Published by Copernicus GmbH in Hydrology and Earth System Sciences
- Vol. 28 (11) , 2375-2400
Open AccessEvaluation of root zone soil moisture products over the Huai River basin
Root zone soil moisture (RZSM) is critical for water resource management, drought monitoring and sub-seasonal flood climate prediction. While RZSM is not directly observable from space, several RZSM products are available and widely used at global and continental scales. This study conducts a comprehensive and quantitative evaluation of eight RZSM products using observations from 58 in situ soil moisture stations over the Huai River basin (HRB) in China. Attention is drawn to the potential factors that contribute to the uncertainties of model-based RZSM, including the errors in atmospheric forcing, vegetation parameterizations, soil properties and spatial scale mismatch. The results show that the Global Land Data Assimilation System Catchment Land Surface Model (GLDAS_CLSM) outperforms the other RZSM products with the highest correlation coefficient (R= 0.69) and the lowest unbiased root mean square error (ubRMSE = 0.018 m3 m−3), while SMOS Level 4 (L4) RZSM shows the worst performance among eight RZSM products. The RZSM products based on land surface models generally perform better in the wet season than in the dry season due to the enhanced ability to capture of the temporal dynamics of in situ observations in the wet season and the inertia of remaining high soil moisture values even in the dry season, while the SMOS L4 RZSM product, derived from SMOS L3 surface moisture (SSM) combined with an exponential filter method, performs better in the dry season due to the attenuated ground microwave radiation signal caused by the increased water vapour absorption and scattering in the wet season. The underestimated SMOS L3 SSM triggers the underestimation of RZSM in SMOS L4. The overestimated RZSM products based on land surface models could be associated with the overestimated precipitation amounts and frequency, the underestimated air temperature, and the underestimated ratio of transpiration to the total terrestrial evapotranspiration. In addition, the biased soil properties and flawed vegetation parameterizations affect the hydrothermal transport processes represented in different land surface models (LSMs) and lead to inaccurate soil moisture simulation. The scale mismatch between point and footprint also introduces representative errors. The comparison of frequency of normalized soil moisture between RZSM products and in situ observations indicates that the LSMs should focus on reducing the frequency of wet soil moisture, increasing the frequency of dry soil moisture and the ability to capture the frequency peak of soil moisture. The study provides some insights into how to improve the ability of land surface models to simulate the land surface states and fluxes by taking into account the issues mentioned above. Finally, these results can be extrapolated to other regions located in similar climate zones, as they share similar precipitation patterns that dominate the terrestrial water cycle.
- Open Access
- 28 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 8258-8270
All-Season Liquid Soil Moisture Retrieval From SMAP
In cold regions, the coexistence and interconversion of liquid water and ice in frozen soils have important implications for energy partitioning and surface runoff at the Earth's surface. Passive microwave remote sensing is crucial for global monitoring of soil moisture (SM). However, current research on SM focuses mainly on unfrozen soil conditions. Limited studies have been conducted on variations in soil liquid water content throughout the freezing season. This study investigated the potential use of brightness temperature (TB) observations from the Soil Moisture Active Passive (SMAP) satellite for retrieving all-season liquid SM. The single-channel algorithm (SCA) and the Zhang-Zhao dielectric model, which was specifically developed for freezing and thawing soils, achieved successful retrieval of liquid SM in both frozen and thawed soils, even when snow cover was present. The results indicate improved spatial coverage (during winter) and consistent spatial patterns in SM compared to the SMAP products. Validation at 17 SM networks suggests that the retrieved all-season liquid SM effectively captures the dynamic characteristics of each region with an average bias of 0.011 m 3 /m 3 , an average unbiased root mean square error (ubRMSE) of 0.056 m 3 /m 3 , and an average correlation coefficient of 0.76. The additional retrieval of unfrozen water content during the freezing season would enhance the monitoring and understanding of the hydrological cycle and energy balance in cold regions.
- 28 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 8258-8270
Open AccessAll-Season Liquid Soil Moisture Retrieval From SMAP
In cold regions, the coexistence and interconversion of liquid water and ice in frozen soils have important implications for energy partitioning and surface runoff at the Earth's surface. Passive microwave remote sensing is crucial for global monitoring of soil moisture (SM). However, current research on SM focuses mainly on unfrozen soil conditions. Limited studies have been conducted on variations in soil liquid water content throughout the freezing season. This study investigated the potential use of brightness temperature (TB) observations from the Soil Moisture Active Passive (SMAP) satellite for retrieving all-season liquid SM. The single-channel algorithm (SCA) and the Zhang-Zhao dielectric model, which was specifically developed for freezing and thawing soils, achieved successful retrieval of liquid SM in both frozen and thawed soils, even when snow cover was present. The results indicate improved spatial coverage (during winter) and consistent spatial patterns in SM compared to the SMAP products. Validation at 17 SM networks suggests that the retrieved all-season liquid SM effectively captures the dynamic characteristics of each region with an average bias of 0.011 m 3 /m 3 , an average unbiased root mean square error (ubRMSE) of 0.056 m 3 /m 3 , and an average correlation coefficient of 0.76. The additional retrieval of unfrozen water content during the freezing season would enhance the monitoring and understanding of the hydrological cycle and energy balance in cold regions.
- Open Access
- 22 September 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-32
Evaluation of root-zone soil moisture over the Huai river basin
Root zone soil moisture (RZSM) is critical for water resource management, drought monitoring and sub-seasonal flood climate prediction. RZSM is not directly observable from space, but several RZSM products are available and widely used at global and continental scales. This paper presents a comprehensive quantitative evaluation of eight RZSM products over the Huai River Basin (HRB) in China. A direct validation is performed using observations from 58 in situ soil moisture stations from 1 April 2015 to 31 March 2020. Attention is drawn to the potential factors that increase the uncertainties of model-based RZSM, such as errors in atmospheric forcing (precipitation, air temperature), soil properties, and spatial scale mismatch. The results show that the Global Land Data Assimilation System Catchment Land Surface Model (GLDAS_CLSM) performs best among all RZSM products with the highest correlation coefficient (R) and the lowest unbiased root mean square error (ubRMSE): 0.69 and 0.018 m3 m−3, respectively. All RZSM products tend to overestimate in situ soil moisture values, except for the Soil Moisture and Ocean Salinity (SMOS) L4 product, which underestimates RZSM. The underestimation of Surface Soil Moisture (SSM) in SMOS L3, caused by underestimated physical surface temperature and overestimated ERA interim soil moisture, triggers the underestimation of RZSM in SMOS L4. The overestimation of RZSM by the other products can be explained by the overestimation of precipitation, the frequency of precipitation events (drizzle effects) and the underestimation of air temperature. In addition, the overestimation of soil clay content and the underestimation of soil sand content in different LSMs lead to higher soil moisture values. The intercomparison of the eight RZSM products shows that MERRA-2 and SMAP L4 RZSM have the highest correlation, which can be attributed to the fact that both products use the catchment land surface model and the atmospheric forcing provided by the Goddard Earth Observing System Model, version 5 (GEOS-5), although the versions differ slightly.
- 22 September 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-32
Open AccessEvaluation of root-zone soil moisture over the Huai river basin
Root zone soil moisture (RZSM) is critical for water resource management, drought monitoring and sub-seasonal flood climate prediction. RZSM is not directly observable from space, but several RZSM products are available and widely used at global and continental scales. This paper presents a comprehensive quantitative evaluation of eight RZSM products over the Huai River Basin (HRB) in China. A direct validation is performed using observations from 58 in situ soil moisture stations from 1 April 2015 to 31 March 2020. Attention is drawn to the potential factors that increase the uncertainties of model-based RZSM, such as errors in atmospheric forcing (precipitation, air temperature), soil properties, and spatial scale mismatch. The results show that the Global Land Data Assimilation System Catchment Land Surface Model (GLDAS_CLSM) performs best among all RZSM products with the highest correlation coefficient (R) and the lowest unbiased root mean square error (ubRMSE): 0.69 and 0.018 m3 m−3, respectively. All RZSM products tend to overestimate in situ soil moisture values, except for the Soil Moisture and Ocean Salinity (SMOS) L4 product, which underestimates RZSM. The underestimation of Surface Soil Moisture (SSM) in SMOS L3, caused by underestimated physical surface temperature and overestimated ERA interim soil moisture, triggers the underestimation of RZSM in SMOS L4. The overestimation of RZSM by the other products can be explained by the overestimation of precipitation, the frequency of precipitation events (drizzle effects) and the underestimation of air temperature. In addition, the overestimation of soil clay content and the underestimation of soil sand content in different LSMs lead to higher soil moisture values. The intercomparison of the eight RZSM products shows that MERRA-2 and SMAP L4 RZSM have the highest correlation, which can be attributed to the fact that both products use the catchment land surface model and the atmospheric forcing provided by the Goddard Earth Observing System Model, version 5 (GEOS-5), although the versions differ slightly.
- Open Access
- 5 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 16 (19391404) , 4276-4286
A Soil Moisture Retrieval Method for Reducing Topographic Effect: A Case Study on the Qinghai–Tibetan Plateau With SMOS Data
The topography can be very important for passive microwave remote sensing of soil moisture due to its complex influence on the emitted brightness temperature observed by a satellite microwave radiometer. In this study, a methodology of using the first brightness Stokes parameter (i.e., the sum of vertical and horizontal polarization brightness temperature) observed by the Soil Moisture and Ocean Salinity (SMOS) was proposed to improve the soil moisture retrieval under complex topographic conditions. The applicability of the proposed method is validated using in-situ soil moisture measurements collected at four networks (Pali, Naqu, Maqu and Wudaoliang) on the Qinghai-Tibetan Plateau. The results over Pali, which is a typical mountainous area, showed that soil moisture retrievals using the first brightness Stokes parameter are in better agreement with the in-situ measurements (the correlation coefficient R >0.75 and unbiased root mean square error < 0.04 m 3 /m 3 ) compared with that using the single-polarization brightness temperature. At the other three networks with relatively flatter terrains, soil moisture retrievals using the first brightness Stokes parameter are found to be comparable to the single-polarization retrievals. On the contrary, the maximum bias of the retrieved soil moisture caused by topographic effects exceeds 0.1 m 3 /m 3 when using vertical or horizontal polarization alone, which is far beyond the expected accuracy (0.04 m 3 /m 3 ) of SMOS satellite. In the regions on the Qinghai-Tibetan Plateau where the vegetation effect can be ignored, soil moisture retrieved using horizontal polarization brightness temperature is generally underestimated, overestimated when using vertical polarization brightness temperature. It is reasonable due to the polarization rotation effect (depolarization) caused by the topographic effects. It is concluded that the proposed method for soil moisture retrieval using the first brightness Stokes parameter has a great potential in reducing the influence of topographic effects.
- 5 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 16 (19391404) , 4276-4286
Open AccessA Soil Moisture Retrieval Method for Reducing Topographic Effect: A Case Study on the Qinghai–Tibetan Plateau With SMOS Data
The topography can be very important for passive microwave remote sensing of soil moisture due to its complex influence on the emitted brightness temperature observed by a satellite microwave radiometer. In this study, a methodology of using the first brightness Stokes parameter (i.e., the sum of vertical and horizontal polarization brightness temperature) observed by the Soil Moisture and Ocean Salinity (SMOS) was proposed to improve the soil moisture retrieval under complex topographic conditions. The applicability of the proposed method is validated using in-situ soil moisture measurements collected at four networks (Pali, Naqu, Maqu and Wudaoliang) on the Qinghai-Tibetan Plateau. The results over Pali, which is a typical mountainous area, showed that soil moisture retrievals using the first brightness Stokes parameter are in better agreement with the in-situ measurements (the correlation coefficient R >0.75 and unbiased root mean square error < 0.04 m 3 /m 3 ) compared with that using the single-polarization brightness temperature. At the other three networks with relatively flatter terrains, soil moisture retrievals using the first brightness Stokes parameter are found to be comparable to the single-polarization retrievals. On the contrary, the maximum bias of the retrieved soil moisture caused by topographic effects exceeds 0.1 m 3 /m 3 when using vertical or horizontal polarization alone, which is far beyond the expected accuracy (0.04 m 3 /m 3 ) of SMOS satellite. In the regions on the Qinghai-Tibetan Plateau where the vegetation effect can be ignored, soil moisture retrieved using horizontal polarization brightness temperature is generally underestimated, overestimated when using vertical polarization brightness temperature. It is reasonable due to the polarization rotation effect (depolarization) caused by the topographic effects. It is concluded that the proposed method for soil moisture retrieval using the first brightness Stokes parameter has a great potential in reducing the influence of topographic effects.
- Open Access
- 6 March 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-39
Evaluation of model-derived root-zone soil moisture over the Huai river basin
Root-zone soil moisture (RZSM) is crucial for water resource management, drought monitoring and sub-seasonal flood climate forecast. RZSM is not directly observable from space but various model-derived RZSM products are available at the global scale and are widely used. In this paper, a comprehensive quantitative evaluation of eight RZSM products is made over the Huai river basin (HRB) in China. A direct validation is performed using observations from 58 in situ soil moisture stations from 1 April 2015 to 31 March 2020. Attention is drawn to the potential factors increasing uncertainties of model-generated RZSM, such as errors on atmospheric forcings (precipitation, air temperature), soil properties, and model parameterizations. Results indicate that the Global Land Data Assimilation System Catchment Land Surface Model (GLDAS_CLSM) performs best among all RZSM products with the highest correlation coefficient (R) and lowest unbiased root-mean square error (ubRMSE): 0.503 and 0.031 m3 m−3, respectively. All RZSM products tend to overestimate the in situ soil moisture values, except for the Soil Moisture and Ocean Salinity (SMOS) L4 product, which underestimates RZSM. The underestimated SMOS L3 SSM associated with low physical surface temperature triggers the underestimation of RZSM in SMOS L4. The RZSM overestimation by other products can be explained by the overestimation of precipitation amount, precipitation event frequency (drizzle effects) and by the underestimation of air temperature. Besides, the overestimation of the soil clay content and the underestimation of the soil sand content in different LSMs leads to larger soil moisture values. The intercomparison of the eight RZSM products shows that MERRA-2 and SMAP L4 RZSM are the most correlated with one another. These products are based on the same LSM and on the same surface meteorological forcing generated from the National Aeronautics and Space Administration (NASA) GEOS-5. In addition, model parameterizations in different LSMs vary considerably, affecting the transfer and exchange of water and heat in the vadose zone.
- 6 March 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-39
Open AccessEvaluation of model-derived root-zone soil moisture over the Huai river basin
Root-zone soil moisture (RZSM) is crucial for water resource management, drought monitoring and sub-seasonal flood climate forecast. RZSM is not directly observable from space but various model-derived RZSM products are available at the global scale and are widely used. In this paper, a comprehensive quantitative evaluation of eight RZSM products is made over the Huai river basin (HRB) in China. A direct validation is performed using observations from 58 in situ soil moisture stations from 1 April 2015 to 31 March 2020. Attention is drawn to the potential factors increasing uncertainties of model-generated RZSM, such as errors on atmospheric forcings (precipitation, air temperature), soil properties, and model parameterizations. Results indicate that the Global Land Data Assimilation System Catchment Land Surface Model (GLDAS_CLSM) performs best among all RZSM products with the highest correlation coefficient (R) and lowest unbiased root-mean square error (ubRMSE): 0.503 and 0.031 m3 m−3, respectively. All RZSM products tend to overestimate the in situ soil moisture values, except for the Soil Moisture and Ocean Salinity (SMOS) L4 product, which underestimates RZSM. The underestimated SMOS L3 SSM associated with low physical surface temperature triggers the underestimation of RZSM in SMOS L4. The RZSM overestimation by other products can be explained by the overestimation of precipitation amount, precipitation event frequency (drizzle effects) and by the underestimation of air temperature. Besides, the overestimation of the soil clay content and the underestimation of the soil sand content in different LSMs leads to larger soil moisture values. The intercomparison of the eight RZSM products shows that MERRA-2 and SMAP L4 RZSM are the most correlated with one another. These products are based on the same LSM and on the same surface meteorological forcing generated from the National Aeronautics and Space Administration (NASA) GEOS-5. In addition, model parameterizations in different LSMs vary considerably, affecting the transfer and exchange of water and heat in the vadose zone.
- 3 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 59 (5) , 4018-4032
Global Soil Moisture Retrievals From the Chinese FY-3D Microwave Radiation Imager
The FengYun-3 (FY-3) series satellite is the second generation of Chinese polar-orbiting meteorological satellite missions. The FY-3D satellite was launched on November 2017 and has been providing valuable data for meteorological applications, including brightness temperature (TB) data from the MicroWave Radiation Imager (MWRI). In this study, we developed a global soil moisture retrieval algorithm, based on the radiative transfer equation (RTE) for using the FY-3D MWRI TB to continue the soil moisture record from FY-3 satellites. We adopted a new empirical model to compute vegetation water content (VWC) based on the leaf area index (LAI) and canopy height (H) for vegetation effects correction. The Qp model, which addresses the soil surface roughness effects using dual-polarization information, is then used for soil moisture retrieval. Validation of the FY-3D soil moisture was conducted with the in-situ data and the validation results showed encouraging accuracy over a variety of landcovers, with bias and unbiased root-mean-squared difference (ubRMSE) at or below the level of 0.06 m³· m⁻³. Monthly averaged soil moisture products generated from FY-3D could represent the seasonal changes in soil moisture and show reasonable spatial distribution of soil moisture at a global scale.
- 3 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 59 (5) , 4018-4032
Global Soil Moisture Retrievals From the Chinese FY-3D Microwave Radiation Imager
The FengYun-3 (FY-3) series satellite is the second generation of Chinese polar-orbiting meteorological satellite missions. The FY-3D satellite was launched on November 2017 and has been providing valuable data for meteorological applications, including brightness temperature (TB) data from the MicroWave Radiation Imager (MWRI). In this study, we developed a global soil moisture retrieval algorithm, based on the radiative transfer equation (RTE) for using the FY-3D MWRI TB to continue the soil moisture record from FY-3 satellites. We adopted a new empirical model to compute vegetation water content (VWC) based on the leaf area index (LAI) and canopy height (H) for vegetation effects correction. The Qp model, which addresses the soil surface roughness effects using dual-polarization information, is then used for soil moisture retrieval. Validation of the FY-3D soil moisture was conducted with the in-situ data and the validation results showed encouraging accuracy over a variety of landcovers, with bias and unbiased root-mean-squared difference (ubRMSE) at or below the level of 0.06 m³· m⁻³. Monthly averaged soil moisture products generated from FY-3D could represent the seasonal changes in soil moisture and show reasonable spatial distribution of soil moisture at a global scale.