Asel Abdullayeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Asel Abdullayeva has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Aidana Torekul
Department of Radio Engineering and Telecommunications, ALT University Named After M. Tynyshpaeva, Shevchenko Street 97, Almaty 050013, Kazakhstan
1 shared publication - Aliya Izbairova
Satbayev University
1 shared publication - Askar Abdykadyrov
Department of Electronics, Telecommunications and Space Technologies, Satbayev University, Almaty 050013, Kazakhstan
1 shared publication - Azhar Analiyeva
Department of Technical Disciplines, Kazakhstan University of Innovation and Telecommunication Systems, 81 Manshuk Mametova Street, Uralsk 090006, Kazakhstan
1 shared publication - Dariga Kushtayeva
School of Transport Engineering and Logistics Named After M. Tynyshpayev, Satbayev University, 22 Satpayev Street, Almaty 050013, Kazakhstan
1 shared publication - Dinara Kassymova
Mukhametzhan Tynyshbayev ALT University
1 shared publication
Latest Publications
- Open Access
- 12 November 2026
- Published by MDPI AG in Future Internet
- Vol. 18 (11) , 622
Integrated 5G-IoT-AI Digital Escort Model for Trans-Caspian Freight Logistics: Simulation and Validation
Freight logistics on the Trans-Caspian International Transport Route (Middle Corridor) suffer from long dwell times, limited cargo visibility and frequent incidents. This study quantifies how a digital escort of freight, built on a four-layer 5G-IoT-AI architecture, could change the key performance indicators of the Kazakhstan section of the corridor. Each architectural layer was mapped to a measurable mechanism and coefficient, and three segments of a Kazakhstan freight forwarder’s chain were simulated, including the railway corridor (Monte Carlo simulation, N = 10,000), the port of Aktau (discrete-event simulation) and China–Europe transit, compared with a route attractiveness index. In the baseline digital scenario, railway lead time fell by 6.3% (Cohen’s d = 1.26) and expected incidents per container by 35.0%. At the port, operational errors decreased by 34.8%, whereas dwell time decreased by only 3.2% because ferry waiting time remained the dominant contributor to overall port dwell time.r. A factorial analysis showed that AI-supported processing drives lead time, IoT monitoring drives incidents and variability, and 5G affects only response time. With the current monitored share of about 35%, the lead-time gain fell below the practical-relevance threshold. The Kazakhstan route ranked first for 95.8% of 100,000 random weight vectors and remained first when the visibility criterion was removed.
- 12 November 2026
- Published by MDPI AG in Future Internet
- Vol. 18 (11) , 622
Open AccessIntegrated 5G-IoT-AI Digital Escort Model for Trans-Caspian Freight Logistics: Simulation and Validation
Freight logistics on the Trans-Caspian International Transport Route (Middle Corridor) suffer from long dwell times, limited cargo visibility and frequent incidents. This study quantifies how a digital escort of freight, built on a four-layer 5G-IoT-AI architecture, could change the key performance indicators of the Kazakhstan section of the corridor. Each architectural layer was mapped to a measurable mechanism and coefficient, and three segments of a Kazakhstan freight forwarder’s chain were simulated, including the railway corridor (Monte Carlo simulation, N = 10,000), the port of Aktau (discrete-event simulation) and China–Europe transit, compared with a route attractiveness index. In the baseline digital scenario, railway lead time fell by 6.3% (Cohen’s d = 1.26) and expected incidents per container by 35.0%. At the port, operational errors decreased by 34.8%, whereas dwell time decreased by only 3.2% because ferry waiting time remained the dominant contributor to overall port dwell time.r. A factorial analysis showed that AI-supported processing drives lead time, IoT monitoring drives incidents and variability, and 5G affects only response time. With the current monitored share of about 35%, the lead-time gain fell below the practical-relevance threshold. The Kazakhstan route ranked first for 95.8% of 100,000 random weight vectors and remained first when the visibility criterion was removed.
- Open Access
- 26 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (5) , 2274
Improving the Efficiency of Fixed-Wing Unmanned Aerial Vehicle Through the Enhancement of Aerodynamic and Mechanical Structures
This paper presents a comprehensive study aimed at improving the efficiency of unmanned aerial vehicles (UAVs) through the enhancement of their aerodynamic and mechanical structures. The research is based on coupled computational fluid dynamics (CFD) and finite element analysis (FEA). The airflow around the UAV was modeled using the Navier–Stokes equations, while the structural behavior was described by the equations of linear elasticity. A UAV configuration with a wingspan of 1.8 m and a mass-optimized structure was investigated for flight speeds in the range of 10–35 m/s and angles of attack from −5° to +15°. The results of the aerodynamic optimization, including airfoil thickness variation and smoothing of the wing–fuselage junction, showed a reduction in the drag coefficient by 9–12% and an increase in the lift-to-drag ratio by up to 11% in the cruise regime. The structural optimization based on replacing aluminum with a carbon-fiber composite material led to a reduction in the structural mass by 13–16%, a reduction in the structural strength criterion value by 18–22%, as confirmed by the Tsai–Wu failure analysis, and a reduction in wing-tip deflection by 20–25% under 3 g and 5 g load cases, while satisfying strength and stiffness requirements. The obtained results demonstrate that the proposed integrated aerodynamic and structural optimization approach significantly improves the overall performance, efficiency, and operational reliability of UAV systems.
- 26 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (5) , 2274
Open AccessImproving the Efficiency of Fixed-Wing Unmanned Aerial Vehicle Through the Enhancement of Aerodynamic and Mechanical Structures
This paper presents a comprehensive study aimed at improving the efficiency of unmanned aerial vehicles (UAVs) through the enhancement of their aerodynamic and mechanical structures. The research is based on coupled computational fluid dynamics (CFD) and finite element analysis (FEA). The airflow around the UAV was modeled using the Navier–Stokes equations, while the structural behavior was described by the equations of linear elasticity. A UAV configuration with a wingspan of 1.8 m and a mass-optimized structure was investigated for flight speeds in the range of 10–35 m/s and angles of attack from −5° to +15°. The results of the aerodynamic optimization, including airfoil thickness variation and smoothing of the wing–fuselage junction, showed a reduction in the drag coefficient by 9–12% and an increase in the lift-to-drag ratio by up to 11% in the cruise regime. The structural optimization based on replacing aluminum with a carbon-fiber composite material led to a reduction in the structural mass by 13–16%, a reduction in the structural strength criterion value by 18–22%, as confirmed by the Tsai–Wu failure analysis, and a reduction in wing-tip deflection by 20–25% under 3 g and 5 g load cases, while satisfying strength and stiffness requirements. The obtained results demonstrate that the proposed integrated aerodynamic and structural optimization approach significantly improves the overall performance, efficiency, and operational reliability of UAV systems.