Schaline Winck Alberti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Schaline Winck Alberti has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Edson Antonio da Silva
Departamento de Tecnologia, Centro de Tecnologia, Universidade Estadual de Maringá, Av. Ângelo Moreira da Fonseca 1800, Umuarama 87506-370, PR, Brazil
3 shared publications - Plínio Ribeiro Fajardo Campos
Universidade Estadual do Oeste do Parana - Campus de Toledo
2 shared publications - Cleverson Busso
Group of Polymers and Nanostructures, Federal University of Technology-Paraná, Rua Cristo Rei, 19, Toledo 85902-490, Brazil
1 shared publication Edson Antônio da Silva
Department of Chemical Engineering, Graduate Program in Chemical Engineering, Universidade Estadual Do Oeste Do Paraná (UNIOESTE), Toledo, Brazil
1 shared publicationFabiano Bisinella Scheufele
Graduate Program of Chemical and Biotechnological Processes (PPGQB), Universidade Tecnológica Federal Do Paraná (UTFPR), Toledo, Brazil
1 shared publication- Fabiano Bisinella Scheufele
Federal University of Technology−Paraná
1 shared publication
Latest Publications
- Open Access
- 27 October 2026
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (39) , 17798-17815
Heterogeneous carbon/apatite composite adsorbent: cooperative ciprofloxacin adsorption
This work aimed to evaluate the removal of ciprofloxacin (CIP) from aqueous solutions by adsorption onto a carbon/apatite composite (CApC) produced from fish scales. Initially, the adsorption of CIP was analyzed at different pH values, identifying pH 8 as the optimal condition (q max = 79.09 mg g −1 —experimental). Subsequently, kinetics and equilibrium studies were conducted in a batch system. The CApC material was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and separate adsorption tests of its carbonaceous and inorganic phases. The kinetic data were described using the pseudo-first-order model with two sites and diffusion in the pores, indicating limitation in the transport of the molecule. The Langmuir-Dubinin Radushkevich model (L-DR) provided the best fit to the data and predicted a total capacity of q maxL-DR = 84 mg g −1 , suggesting monolayer surface adsorption followed by micropore filling. Moreover, the adsorption mechanism is controlled by both surface-chemical interactions (i.e., hydrogen bonding and π-π stacking) and textural properties, wherein a tailored micropores size allows the “pore filling effect” retention mechanism for the CIP molecule. In general, the CApC adsorbent material showed efficiency and desirable characteristics for the treatment of water contaminated with the CIP drug.
- 27 October 2026
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 33 (39) , 17798-17815
Open AccessHeterogeneous carbon/apatite composite adsorbent: cooperative ciprofloxacin adsorption
This work aimed to evaluate the removal of ciprofloxacin (CIP) from aqueous solutions by adsorption onto a carbon/apatite composite (CApC) produced from fish scales. Initially, the adsorption of CIP was analyzed at different pH values, identifying pH 8 as the optimal condition (q max = 79.09 mg g −1 —experimental). Subsequently, kinetics and equilibrium studies were conducted in a batch system. The CApC material was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and separate adsorption tests of its carbonaceous and inorganic phases. The kinetic data were described using the pseudo-first-order model with two sites and diffusion in the pores, indicating limitation in the transport of the molecule. The Langmuir-Dubinin Radushkevich model (L-DR) provided the best fit to the data and predicted a total capacity of q maxL-DR = 84 mg g −1 , suggesting monolayer surface adsorption followed by micropore filling. Moreover, the adsorption mechanism is controlled by both surface-chemical interactions (i.e., hydrogen bonding and π-π stacking) and textural properties, wherein a tailored micropores size allows the “pore filling effect” retention mechanism for the CIP molecule. In general, the CApC adsorbent material showed efficiency and desirable characteristics for the treatment of water contaminated with the CIP drug.
- Open Access
- 1 April 2026
- Published by Unified Journals Network Publishing House in Revista Multidisciplinar do Nordeste Mineiro
- Vol. 13 (05) , 1-26
ADSORÇÃO DO HERBICIDA COMERCIAL 2,4-DICLOROFENOXIACÉTICO (2,4-D) POR CARVÃO ATIVADO
The objective of this research was to evaluate the applicability and efficiency of commercial activated carbon in the removal of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D), considered an emerging contaminant of environmental concern, particularly in aqueous systems. The experimental study was conducted to understand the influence of operational parameters such as pH and initial contaminant concentration on the adsorption capacity of the material. To complement the analyses, the activated carbon was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM), which enabled the identification of the main functional groups and the observation of the carbon morphology. The results demonstrated that pH 8.0 was the most favorable condition for the process, resulting in the highest adsorption capacity (q = 84.56 mg g⁻¹). The adsorption kinetics were better described by the pseudo-second-order model, suggesting the predominance of chemical mechanisms in the interaction between adsorbate and adsorbent. The equilibrium was defined by the Langmuir isotherm, indicating the formation of a homogeneous monolayer on the surface of the activated carbon. Finally, the commercial activated carbon exhibited high efficiency in the removal of 2,4-D, demonstrating its potential for application in water treatment systems and effluents contaminated with organic pollutants.
- 1 April 2026
- Published by Unified Journals Network Publishing House in Revista Multidisciplinar do Nordeste Mineiro
- Vol. 13 (05) , 1-26
Open AccessADSORÇÃO DO HERBICIDA COMERCIAL 2,4-DICLOROFENOXIACÉTICO (2,4-D) POR CARVÃO ATIVADO
The objective of this research was to evaluate the applicability and efficiency of commercial activated carbon in the removal of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D), considered an emerging contaminant of environmental concern, particularly in aqueous systems. The experimental study was conducted to understand the influence of operational parameters such as pH and initial contaminant concentration on the adsorption capacity of the material. To complement the analyses, the activated carbon was characterized using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM), which enabled the identification of the main functional groups and the observation of the carbon morphology. The results demonstrated that pH 8.0 was the most favorable condition for the process, resulting in the highest adsorption capacity (q = 84.56 mg g⁻¹). The adsorption kinetics were better described by the pseudo-second-order model, suggesting the predominance of chemical mechanisms in the interaction between adsorbate and adsorbent. The equilibrium was defined by the Langmuir isotherm, indicating the formation of a homogeneous monolayer on the surface of the activated carbon. Finally, the commercial activated carbon exhibited high efficiency in the removal of 2,4-D, demonstrating its potential for application in water treatment systems and effluents contaminated with organic pollutants.
- Open Access
- 1 April 2026
- Published by Unified Journals Network Publishing House in Revista Multidisciplinar do Nordeste Mineiro
- Vol. 13 (05) , 1-33
ESTUDO DAS CONDIÇÕES DE PIRÓLISE DO RESÍDUO DE EXTRAÇÃO DE BURITI
Este estudo investigou a pirólise da biomassa de buriti com o objetivo de otimizar a produção de dois subprodutos importantes: biochar e bio-óleo. Para esse propósito, experimentos foram realizados em um reator de pirólise, variando temperaturas entre 450 °C e 600 °C e tempos de processo de 10 a 60 minutos. A análise termogravimétrica (TGA) revelou as diferentes etapas da degradação térmica da biomassa de buriti. Inicialmente, uma perda de massa de 10% entre 10 °C e 200 °C foi associada à evaporação da água presente na biomassa. Subsequentemente, entre 200 °C e 400 °C, ocorreu uma perda de 45%, correlacionada com a decomposição de hemicelulose, celulose e lignina, os principais componentes da biomassa lignocelulósica. O maior rendimento de biochar foi obtido a 450 °C por 30 minutos de pirólise (30,75%), enquanto o maior rendimento de bio-óleo foi alcançado a 525 °C por 60 minutos (48,98%). A análise de variância (ANOVA) demonstrou que a temperatura influenciou significativamente o rendimento de biochar, enquanto o tempo foi o principal fator para o aumento do rendimento de bio-óleo. O bio-óleo gerado apresentou poder calorífico superior (PCS) de 10,68 MJ/kg, enquanto o biochar apresentou um PCS significativamente maior de 30,664 MJ kg-1, evidenciando sua maior eficiência energética. A análise espectroscópica por FTIR revelou a presença de grupos funcionais como fenóis, álcoois e compostos alifáticos, confirmando a complexidade química da biomassa. As análises de superfície ajustadas, tanto em 3D quanto em 2D, indicaram que temperaturas mais baixas favorecem a produção de biochar, enquanto temperaturas mais elevadas e tempos mais longos são mais eficazes para a obtenção de bio-óleo. Esses resultados sugerem que a pirólise da biomassa de buriti pode ser otimizada para a produção eficiente de ambos os subprodutos, fornecendo uma rota sustentável para a valorização dessa biomassa.
- 1 April 2026
- Published by Unified Journals Network Publishing House in Revista Multidisciplinar do Nordeste Mineiro
- Vol. 13 (05) , 1-33
Open AccessESTUDO DAS CONDIÇÕES DE PIRÓLISE DO RESÍDUO DE EXTRAÇÃO DE BURITI
Este estudo investigou a pirólise da biomassa de buriti com o objetivo de otimizar a produção de dois subprodutos importantes: biochar e bio-óleo. Para esse propósito, experimentos foram realizados em um reator de pirólise, variando temperaturas entre 450 °C e 600 °C e tempos de processo de 10 a 60 minutos. A análise termogravimétrica (TGA) revelou as diferentes etapas da degradação térmica da biomassa de buriti. Inicialmente, uma perda de massa de 10% entre 10 °C e 200 °C foi associada à evaporação da água presente na biomassa. Subsequentemente, entre 200 °C e 400 °C, ocorreu uma perda de 45%, correlacionada com a decomposição de hemicelulose, celulose e lignina, os principais componentes da biomassa lignocelulósica. O maior rendimento de biochar foi obtido a 450 °C por 30 minutos de pirólise (30,75%), enquanto o maior rendimento de bio-óleo foi alcançado a 525 °C por 60 minutos (48,98%). A análise de variância (ANOVA) demonstrou que a temperatura influenciou significativamente o rendimento de biochar, enquanto o tempo foi o principal fator para o aumento do rendimento de bio-óleo. O bio-óleo gerado apresentou poder calorífico superior (PCS) de 10,68 MJ/kg, enquanto o biochar apresentou um PCS significativamente maior de 30,664 MJ kg-1, evidenciando sua maior eficiência energética. A análise espectroscópica por FTIR revelou a presença de grupos funcionais como fenóis, álcoois e compostos alifáticos, confirmando a complexidade química da biomassa. As análises de superfície ajustadas, tanto em 3D quanto em 2D, indicaram que temperaturas mais baixas favorecem a produção de biochar, enquanto temperaturas mais elevadas e tempos mais longos são mais eficazes para a obtenção de bio-óleo. Esses resultados sugerem que a pirólise da biomassa de buriti pode ser otimizada para a produção eficiente de ambos os subprodutos, fornecendo uma rota sustentável para a valorização dessa biomassa.
- 1 May 2023
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 382, 121958
2,4-D removal by fish scales-derived carbon/apatite composite adsorbent: Adsorption mechanism and modeling
- 1 May 2023
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 382, 121958
2,4-D removal by fish scales-derived carbon/apatite composite adsorbent: Adsorption mechanism and modeling