Sangram Mazumder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sangram Mazumder has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
Bijay Basnet
Hanseo University
1 shared publication- Ik Jin Kim
Hanseo University
1 shared publication Jung Gyu Park
Hanseo University
1 shared publication- Naboneeta Sarkar
W. M. Keck Biomedical Materials Research Laboratory, School of Mechanical and Materials Engineering, Washington State University, Pullman, Washington 99164, United States
1 shared publication
Latest Publications
- Open Access
- 16 June 2017
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 6 (2) , 129-138
Al2O3–TiO2/ZrO2–SiO2 based porous ceramics from particle-stabilized wet foam
The porous ceramics based on Al2O3–TiO2/ZrO2–SiO2 from particle-stabilized wet foam by direct foaming were discussed. The initial Al2O3–TiO2 suspension was prepared by adding TiO2 suspension to partially hydrophobized colloidal Al2O3 suspension with equimolar amount, to form Al2TiO5 on sintering. The secondary ZrO2–SiO2 suspension was prepared using the equimolar composition, and to obtain ZrSiO4, ZrTiO4, and mullite phases in the sintered samples, the secondary suspension was blended into the initial suspension at 0, 10, 20, 30, and 50 vol%. The wet foam exhibited an air content up to 87%, Laplace pressure from 1.38 to 2.23 mPa, and higher adsorption free energy at the interface of approximately 5.8×108 to 7.5×108 J resulting an outstanding foam stability of 87%. The final suspension was foamed, and the wet foam was sintered from 1400 to 1600 °C for 1 h. The porous ceramics with pore size from 150 to 400 μm on average were obtained. The phase identification was accomplished using X-ray diffraction (XRD), differential thermal analysis (DTA), and thermogravimetric analysis (TGA), and microstructural analysis was performed using field emission scanning electron microscopy (FESEM).
- 16 June 2017
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 6 (2) , 129-138
Open AccessAl2O3–TiO2/ZrO2–SiO2 based porous ceramics from particle-stabilized wet foam
The porous ceramics based on Al2O3–TiO2/ZrO2–SiO2 from particle-stabilized wet foam by direct foaming were discussed. The initial Al2O3–TiO2 suspension was prepared by adding TiO2 suspension to partially hydrophobized colloidal Al2O3 suspension with equimolar amount, to form Al2TiO5 on sintering. The secondary ZrO2–SiO2 suspension was prepared using the equimolar composition, and to obtain ZrSiO4, ZrTiO4, and mullite phases in the sintered samples, the secondary suspension was blended into the initial suspension at 0, 10, 20, 30, and 50 vol%. The wet foam exhibited an air content up to 87%, Laplace pressure from 1.38 to 2.23 mPa, and higher adsorption free energy at the interface of approximately 5.8×108 to 7.5×108 J resulting an outstanding foam stability of 87%. The final suspension was foamed, and the wet foam was sintered from 1400 to 1600 °C for 1 h. The porous ceramics with pore size from 150 to 400 μm on average were obtained. The phase identification was accomplished using X-ray diffraction (XRD), differential thermal analysis (DTA), and thermogravimetric analysis (TGA), and microstructural analysis was performed using field emission scanning electron microscopy (FESEM).