Haowei Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Haowei Lu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Wenlong Yang
Harbin University of Science and Technology
5 shared publications Gaoru Chen
School of Intelligent Manufacturing Wenzhou Polytechnic 325035 Wenzhou China
4 shared publicationsJiaqi Lin
School of Applied Science, Harbin University of Science and Technology, Harbin, People’s Republic of China
3 shared publications- Haiwu Zheng
Henan University
2 shared publications Lizhu Liu
School of Material Science and Engineering Harbin University of Science and Technology Harbin 150040 People's Republic of China
2 shared publicationsWei Huang
School of Applied Science Harbin University of Science and Technology Harbin 150080 People's Republic of China
2 shared publications
Latest Publications
- Open Access
- 1 November 2025
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 14 (11)
Performance enhancement of nanogenerator achieved in branch-heterostructure piezoelectric ceramic fiber toward electrical transmission power line monitoring
Flexible composites-based piezoelectric nanogenerator (PENG) with low cost, stable properties and sensitivity to mechanical deformation is highly suitable to construct self-powered sensing layer for distributed electrical transmission power lines. However, the lower output performance of the PENG resulting from inadequate effective polarization, hinders its integration with energy management circuits and signal recognition systems. Herein, we propose a high-performance PENG by designing a new piezoelectric ceramic fiber, where BCZT@Ag nanoparticles are grown on the surface of BCZT fibers to form a branch-heterostructure, leading to enhanced charge transport mechanisms and induced polarization in the PENG. The branch-heterostructure ceramic fibers-based PENG exhibits significantly enhanced outputs of 96.4 V and 15.52 µA, which are about 3.2 and 6.5 times higher than those of PENG without specific design. Moreover, an intelligent Power Internet of Things (Power IoTs) system through the synergistic integration of this high-performance PENG and learning-assisted data analytics has been constructed, which enables accurate self-powered real-time monitoring of abnormal vibration states in transmission power lines to prevent rupture-related failures with approximately 96% identification accuracy. This work not only provides an effective strategy to enhance the performance of PENG, but also broadens the application prospects of lead-free piezoelectric ceramics in Power IoTs.
- 1 November 2025
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 14 (11)
Open AccessPerformance enhancement of nanogenerator achieved in branch-heterostructure piezoelectric ceramic fiber toward electrical transmission power line monitoring
Flexible composites-based piezoelectric nanogenerator (PENG) with low cost, stable properties and sensitivity to mechanical deformation is highly suitable to construct self-powered sensing layer for distributed electrical transmission power lines. However, the lower output performance of the PENG resulting from inadequate effective polarization, hinders its integration with energy management circuits and signal recognition systems. Herein, we propose a high-performance PENG by designing a new piezoelectric ceramic fiber, where BCZT@Ag nanoparticles are grown on the surface of BCZT fibers to form a branch-heterostructure, leading to enhanced charge transport mechanisms and induced polarization in the PENG. The branch-heterostructure ceramic fibers-based PENG exhibits significantly enhanced outputs of 96.4 V and 15.52 µA, which are about 3.2 and 6.5 times higher than those of PENG without specific design. Moreover, an intelligent Power Internet of Things (Power IoTs) system through the synergistic integration of this high-performance PENG and learning-assisted data analytics has been constructed, which enables accurate self-powered real-time monitoring of abnormal vibration states in transmission power lines to prevent rupture-related failures with approximately 96% identification accuracy. This work not only provides an effective strategy to enhance the performance of PENG, but also broadens the application prospects of lead-free piezoelectric ceramics in Power IoTs.
- 23 August 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (42) , 423003
A comprehensive review of organic-inorganic composites based piezoelectric nanogenerators through material structure design
With the development and popularization of Internet of things, how to provide energy for distributed sensors, portable and embedded electronic devices have become a challenge. People’s requirements for power supply equipment are portable, sustainable and free maintenance. Therefore, organic–inorganic composites based on piezoelectric nanogenerator (PENG) is becoming one of promising solutions due to these advantages of low cost, excellent mechanical property and environmental adaptability, which can effectively harvest ubiquitous micro-nano mechanical high entropy energy and convert it into electricity to power electronics and nano-systems. In this study, the development of PENGs based on organic–inorganic composites have been reviewed and several strategies toward high output performance of PENGs, including various materials, piezoelectric fillers modification and structural design are summarized and discussed. The effects of different optimization methods on short circuit current (I SC), open circuit voltage (V OC) and output power of various PENGs as well as current difficulty for improving performance have been discussed. Meanwhile, some specific application scenarios in previous reports are also presented. Finally, we have proposed an outlook about future developments of flexible PENG and authors hope that this review can help researchers better understand this field and facilitate the improvement of flexible PENG to realize a broader application in self-powered system.
- 23 August 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (42) , 423003
A comprehensive review of organic-inorganic composites based piezoelectric nanogenerators through material structure design
With the development and popularization of Internet of things, how to provide energy for distributed sensors, portable and embedded electronic devices have become a challenge. People’s requirements for power supply equipment are portable, sustainable and free maintenance. Therefore, organic–inorganic composites based on piezoelectric nanogenerator (PENG) is becoming one of promising solutions due to these advantages of low cost, excellent mechanical property and environmental adaptability, which can effectively harvest ubiquitous micro-nano mechanical high entropy energy and convert it into electricity to power electronics and nano-systems. In this study, the development of PENGs based on organic–inorganic composites have been reviewed and several strategies toward high output performance of PENGs, including various materials, piezoelectric fillers modification and structural design are summarized and discussed. The effects of different optimization methods on short circuit current (I SC), open circuit voltage (V OC) and output power of various PENGs as well as current difficulty for improving performance have been discussed. Meanwhile, some specific application scenarios in previous reports are also presented. Finally, we have proposed an outlook about future developments of flexible PENG and authors hope that this review can help researchers better understand this field and facilitate the improvement of flexible PENG to realize a broader application in self-powered system.
- 7 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (10) , 12243-12256
Enhanced Output Performance of Piezoelectric Nanogenerators by Tb-Modified (BaCa)(ZrTi)O3 and 3D Core/shell Structure Design with PVDF Composite Spinning for Microenergy Harvesting
Flexible piezoelectric nanogenerators (PENG) have attracted great attention due to their stable electrical output and promising applications in the Internet of Things. To develop a high-performance PENG, a significant relationship among material, structure, and performance precipitates us to design its rational construction. Herein, Tb-modified (BaCa)(ZrTi)O3 (BCZT) particles have been fabricated into a 3D structure (3D-Tb-BCZT) by the freeze-drying method, and the innovative 3D core/shell structure of 3D-Tb-BCZT-coated 3D-Tb-BCZT/PVDF composite fibers was carried out through the coaxial electrospinning method. The innovative structure can significantly enhance correlation between adjacent piezoelectric particles and improve stress-transfer efficiency, which can be proven by experimental results and COMSOL simulation. As a result, the improved PENG shows a significantly enhanced output of 48.5 V and 3.35 μA as compared to the PENG with the conventional electrospinning process (15.6 V and 1.32 μA). Due to the advantages of light weight, soft flexibility, and high deformation sensitivity of composite fibers, PENG-based fibers can harvest various mechanical energies in daily life such as biological motion, noise vibration, and wind energies. More importantly, the PENG is sufficient enough to power an electronic device for sustained operation by capturing wind energies through power management circuit design, which further promotes the practical application process of a self-powered system.
- 7 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (10) , 12243-12256
Enhanced Output Performance of Piezoelectric Nanogenerators by Tb-Modified (BaCa)(ZrTi)O3 and 3D Core/shell Structure Design with PVDF Composite Spinning for Microenergy Harvesting
Flexible piezoelectric nanogenerators (PENG) have attracted great attention due to their stable electrical output and promising applications in the Internet of Things. To develop a high-performance PENG, a significant relationship among material, structure, and performance precipitates us to design its rational construction. Herein, Tb-modified (BaCa)(ZrTi)O3 (BCZT) particles have been fabricated into a 3D structure (3D-Tb-BCZT) by the freeze-drying method, and the innovative 3D core/shell structure of 3D-Tb-BCZT-coated 3D-Tb-BCZT/PVDF composite fibers was carried out through the coaxial electrospinning method. The innovative structure can significantly enhance correlation between adjacent piezoelectric particles and improve stress-transfer efficiency, which can be proven by experimental results and COMSOL simulation. As a result, the improved PENG shows a significantly enhanced output of 48.5 V and 3.35 μA as compared to the PENG with the conventional electrospinning process (15.6 V and 1.32 μA). Due to the advantages of light weight, soft flexibility, and high deformation sensitivity of composite fibers, PENG-based fibers can harvest various mechanical energies in daily life such as biological motion, noise vibration, and wind energies. More importantly, the PENG is sufficient enough to power an electronic device for sustained operation by capturing wind energies through power management circuit design, which further promotes the practical application process of a self-powered system.
- 16 June 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (40)
Polarization and space charge performance in PVDF with MPB composition BCZT doped composite films
The morphotropic phase boundary composition 47(Ba0.7Ca0.3)TiO3–0.53Ba(Zr0.2Ti0.8)O3 (calcium barium zirconate titanate, BCZT) were doped in poly(vinylidene fluoride) matrix by solution casting method. The effect of BCZT particles on polarization characteristics of composite films were investigated through dielectric spectra, hysteresis, and thermally stimulated discharge current measurements. It reveals that relative dielectric constant, remnant polarization, and energy storage density gradually increase and reach the maximum value with 39 at 100 Hz, 1.17 μC/cm2, and 3.69 J/cm3 at the concentration of 20 vol % BCZT. The Gaussian method was employed to decompose thermally stimulated discharge current composite peaks and an approximate model was used to analyze the activation energy levels of these films. The results indicated that the introduction of BCZT is effective for the charge carrier traps and activation energy distribution in the relaxation process of composite films. The decreased molecular movements, and increased interfaces formed between the BCZT grains and the poly(vinylidene fluoride) matrix may be responsible for these performances. And a new relaxation peak appeared at about 370 K in composites when BCZT concentration exceeded 20 vol %, which was considered to be caused by the ferroelectric‐paraelectric phase transition of BCZT. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45362.
- 16 June 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (40)
Polarization and space charge performance in PVDF with MPB composition BCZT doped composite films
The morphotropic phase boundary composition 47(Ba0.7Ca0.3)TiO3–0.53Ba(Zr0.2Ti0.8)O3 (calcium barium zirconate titanate, BCZT) were doped in poly(vinylidene fluoride) matrix by solution casting method. The effect of BCZT particles on polarization characteristics of composite films were investigated through dielectric spectra, hysteresis, and thermally stimulated discharge current measurements. It reveals that relative dielectric constant, remnant polarization, and energy storage density gradually increase and reach the maximum value with 39 at 100 Hz, 1.17 μC/cm2, and 3.69 J/cm3 at the concentration of 20 vol % BCZT. The Gaussian method was employed to decompose thermally stimulated discharge current composite peaks and an approximate model was used to analyze the activation energy levels of these films. The results indicated that the introduction of BCZT is effective for the charge carrier traps and activation energy distribution in the relaxation process of composite films. The decreased molecular movements, and increased interfaces formed between the BCZT grains and the poly(vinylidene fluoride) matrix may be responsible for these performances. And a new relaxation peak appeared at about 370 K in composites when BCZT concentration exceeded 20 vol %, which was considered to be caused by the ferroelectric‐paraelectric phase transition of BCZT. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45362.
- 20 May 2017
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 28 (18) , 13360-13370
Improved dielectric strength and loss tangent by interface modification in PI@BCZT/PVDF nano-composite films with high permittivity
- 20 May 2017
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 28 (18) , 13360-13370
Improved dielectric strength and loss tangent by interface modification in PI@BCZT/PVDF nano-composite films with high permittivity
- 24 March 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (29)
Effect of nano‐TiO2 surface modification on polarization characteristics and corona aging performance of polyimide nano‐composites
Using coupling agent isocyanatopropyltriethoxysilane (ICTOS) to modified nano‐TiO2, the polyimide (PI) with different titanium dioxide (TiO2) contents (0, 1, 2, 3, 4, and 5 wt %) doped nano‐composites were prepared by sol–gel method (PI/TiO2 ICTOS composites). The effect of ICTOS modification on polarization and time‐to‐breakdown properties of composites were investigated by thermally stimulated depolarization current (TSDC) method, dielectric, and Corona aging measurements. The TSDC spectra show that ICTOS modification enhanced α‐peak intensity and make β‐peak disappear in composites. Relevant trap parameters were calculated by an approximate model, and the results indicate that introduction of ICTOS is effective for the charge carrier traps, activation energy distribution in composites. Corona aging measurement show corona resistance was also sufficient improved in PI/TiO2 ICTOS composites. The changes of activation energy and intensity of traps in composites may be responsible for the corona resistance. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45101.
- 24 March 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (29)
Effect of nano‐TiO2 surface modification on polarization characteristics and corona aging performance of polyimide nano‐composites
Using coupling agent isocyanatopropyltriethoxysilane (ICTOS) to modified nano‐TiO2, the polyimide (PI) with different titanium dioxide (TiO2) contents (0, 1, 2, 3, 4, and 5 wt %) doped nano‐composites were prepared by sol–gel method (PI/TiO2 ICTOS composites). The effect of ICTOS modification on polarization and time‐to‐breakdown properties of composites were investigated by thermally stimulated depolarization current (TSDC) method, dielectric, and Corona aging measurements. The TSDC spectra show that ICTOS modification enhanced α‐peak intensity and make β‐peak disappear in composites. Relevant trap parameters were calculated by an approximate model, and the results indicate that introduction of ICTOS is effective for the charge carrier traps, activation energy distribution in composites. Corona aging measurement show corona resistance was also sufficient improved in PI/TiO2 ICTOS composites. The changes of activation energy and intensity of traps in composites may be responsible for the corona resistance. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45101.
- 14 March 2017
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 28 (13) , 9658-9666
A novel all-organic DIPAB/PVDF composite film with high dielectric permittivity
- 14 March 2017
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 28 (13) , 9658-9666
A novel all-organic DIPAB/PVDF composite film with high dielectric permittivity