JXJiapeng Xiang

Jiapeng Xiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiapeng Xiang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:

  • Menglin Liang

    Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao 066004, People’s Republic of China

    1 shared publication
  • Menglin Liang

    School of Science, Yanshan University

    1 shared publication
  • Mu Wang

    Electronic Engineering College, Yanshan University, Qinhuangdao 066004, People’s Republic of China

    1 shared publication
  • Qi Hu

    Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao 066004, People’s Republic of China

    1 shared publication
  • Qiquan Liu

    School of Science, Yanshan University

    1 shared publication
  • Sai Liu

    Electronic Engineering College, Yanshan University, Qinhuangdao 066004, People’s Republic of China

    1 shared publication

Latest Publications

  • Ultra-low-loss C-band transmission in a high-negative-curvature elliptical nested hollow-core anti-resonant fiber

    by Zhixu Lu, Jiapeng Xiang, Menglin Liang, Qiquan Liu, Zhen Yang, Zhiming Shen, Yuee Chen

    To achieve low-loss and single-mode stable transmission of C-band laser light, this paper proposes a bend-insensitive hollow-core anti-resonant fiber (HC-ARF) with a dual-cladding nested structure. The structural parameters of the fiber were systematically optimized using the finite element method, and numerical simulations verified its broadband low-loss transmission characteristics. The results show that the confinement loss (CL) of the fiber remains below 1 × 10 −4 dB km −1 over the wavelength range of 1.2–1.6 μ m, and the higher-order mode extinction ratio (HOMER) exceeds 100 within the C-band. At the wavelength of 1.55 μ m, the CL is as low as 1.27 × 10 − 5 dB km −1 with a corresponding HOMER as high as 307.9, demonstrating excellent single-mode, low-loss transmission performance. Furthermore, the bending performance analysis indicates that when the fiber is bent in the X direction with a radius smaller than 5 cm, transmission is maintained, and the bending loss (BL) remains below 3 × 10 −5 dB km −1 . The proposed HC-ARF structure holds significant potential for applications in high-power fiber lasers, compact optical communication systems, and fiber optic sensing networks.

  • Novel single-polarized single-mode low-loss hollow-core anti-resonant fiber

    by Jiapeng Xiang, Mu Wang, Sai Liu, Qi Hu, Zhixu Lu, Menglin Liang, Yuee Chen, Xingtao Zhao

    A novel hollow-core anti-resonant fiber (HC-ARF) design is proposed, featuring a cladding structure composed of five nested tubes and five anti-resonant nested rings. The nested tubes are engineered with two distinct wall thickness configurations (resonant and anti-resonant) to tailor the optical properties. This unique structure endows the fiber with comprehensive superior performance, including single-polarization operation, low modal loss, a high polarization extinction ratio (PER), a high higher-order mode extinction ratio (HOMER), and a broad operating bandwidth. Numerical simulations demonstrate that the proposed design effectively reduces the loss of the x-polarized fundamental mode (x-pol FM) while significantly enhancing the PER. Compared with previous studies, this scheme simultaneously improves both PER and HOMER, while remarkably reducing the bending loss in the -x direction. At the wavelength of 1.55 μm, the x-pol FM loss, PER, and HOMER reach 0.012 dB km −1 , 2,413,562.253, and 688, respectively. Furthermore, the fiber maintains an x-pol FM loss below 1 dB km −1 and a PER exceeding 100 within a bandwidth of 31 nm. For a bending radius of 6 cm, the total bending loss in the -x direction is as low as 0.11 dB km −1 , with a corresponding PER of 126. Considering practical fabrication processes, a tolerance analysis of the cladding strut angle was conducted. The results indicate that the fiber achieves optimal performance when the offset angle is 0°, providing valuable theoretical guidance for the fabrication optimization of similar fibers.