CPChang Wook Park

Chang Wook Park

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chang Wook Park has a total of 1 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Structural safety assessment under 6-DOF loads and vibration characterization of ship superstructures

    by Sung Won Yoon, Chang Wook Park

    This study evaluates the structural integrity of ship superstructures and examines the vibration characteristics of applied materials under operational loading conditions using finite element–based analyses. The structural safety of a composite ship superstructure was first investigated by considering wind loads in combination with six-degree-of-freedom (6-DOF) ship motions. All inverse response function (IRF) values remained below unity, confirming that the structural safety of the superstructure is maintained under combined wind loading and 6-DOF motion conditions. In addition, this study examined the feasibility of replacing conventional metallic superstructures with lightweight composite materials to achieve hull weight reduction and to assess fatigue durability against vibration-induced damage through computational simulation prior to practical application. The results indicate that a hybrid laminate configuration combining carbon fiber and glass fiber is effective in ensuring structural safety. The laminate architecture efficiently distributes applied loads, thereby reducing stresses acting on individual plies as well as on the overall structure. Furthermore, the composite superstructure was shown to withstand wind loading, six-DOF motions and vibratory environments without degradation of structural integrity.

  • Optimized performance of equipment for ship pipe spool fabrication

    by Sung Won Yoon, Chang Wook Park

    In this study, the optimized performance of laser cutting and roundness correction equipment used for pipe welding interfaces during ship piping spool fabrication was investigated. First, the heat transfer phenomena generated during pipe cutting using laser equipment were examined. To analyze thermal deformation at the cut surface, transient heat transfer analyses were conducted following a defined thermal analysis procedure, considering variations in pipe material, diameter and heat source characteristics. In addition, thermo-structural interaction analyses were performed to verify the structural integrity of the pipe under thermal stress, and the effects of heat source travel speed on thermal distribution and structural response were evaluated. Thermo-structural interaction analyses were carried out for a total of eight comparative cases based on combinations of pipe material, diameter and heat source travel speed. The results indicated that the travel speed of the heat source had a dominant influence on the resulting thermal distribution. Furthermore, to reduce machining inaccuracies and welding errors during pipe fitting by improving pipe roundness, the optimal pressing force of the roundness correction equipment was evaluated through reaction force measurements. Based on these analyses, optimal correction pressures and device settings suitable for the elastic recovery characteristics of each material were derived. In particular, material-specific optimal correction pressures were determined to ensure appropriate loading conditions on both the pipe and the roundness correction device.