Xiang-Hua Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiang-Hua Song has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Ping Hu
School of Civil Engineering and Architecture, University of Jinan, 336 West Nanxinzhuang Road, Jinan 250022, China
3 shared publications - Jian-Cai Wang
Shandong Hi-Speed Construction Management Group Co., Ltd., Longding Road, Lixia District, Jinan 250022, China
2 shared publications - Bao-Shuo Zhang
Shandong Hi-Speed Construction Management Group Co., Ltd., No. 0, Longding Road, Lixia District, Jinan 250022, China
1 shared publication - Dong-Ming Duan
Shandong Hi-Speed Construction Management Group Co., Ltd., Longding Road, Lixia District, Jinan 250022, China
1 shared publication - Jia-Yu Ruan
School of Civil Engineering and Architecture, University of Jinan, 336 West Nanxinzhuang Road, Jinan 250022, China
1 shared publication - Jun-Cheng Liu
College of Civil Engineering, Fuzhou University, Fuzhou 350108, China
1 shared publication
Latest Publications
- Open Access
Unloading Mechanical Behaviors of Clay Considering Initial Principal Stress Direction Effect: Experimental Study and Modified Constitutive Model
Excavation-induced unloading can alter soil response through both stress-path effects and material orientation. This study investigates remolded clay from Jinan using conventional consolidated undrained (CCU) and lateral unloading undrained (LUU) triaxial tests at orientation angles α = 0°, 30°, 45°, 60°, and 90° and effective consolidation pressures of 100 and 200 kPa. The measured responses were strain-hardening, with no objective yield point or distinct peak. Under CCU, the operational failure stress generally decreased from α = 0° to 60° and increased slightly at 90°, while the fitted initial tangent modulus decreased with α and the hyperbolic asymptotic deviator stress was highest at 45°. Under LUU, the terminal deviator stress showed pressure-dependent orientation effects, and the initial tangent modulus decreased with α. The apparent cohesion was lowest at 45°, whereas the apparent friction angle was lowest at 90°. An orientation-dependent Duncan–Chang extension was developed for the prescribed LUU path by parameterizing K, n, Rf, c, and φ as functions of α. An internal hold-out check at α = 60° gave parameter deviations of 2.1% or less, supporting interpolation within the investigated orientation range. Accordingly, the formulation is interpreted as an empirical fixed-orientation relation for the investigated LUU path.
Open AccessUnloading Mechanical Behaviors of Clay Considering Initial Principal Stress Direction Effect: Experimental Study and Modified Constitutive Model
Excavation-induced unloading can alter soil response through both stress-path effects and material orientation. This study investigates remolded clay from Jinan using conventional consolidated undrained (CCU) and lateral unloading undrained (LUU) triaxial tests at orientation angles α = 0°, 30°, 45°, 60°, and 90° and effective consolidation pressures of 100 and 200 kPa. The measured responses were strain-hardening, with no objective yield point or distinct peak. Under CCU, the operational failure stress generally decreased from α = 0° to 60° and increased slightly at 90°, while the fitted initial tangent modulus decreased with α and the hyperbolic asymptotic deviator stress was highest at 45°. Under LUU, the terminal deviator stress showed pressure-dependent orientation effects, and the initial tangent modulus decreased with α. The apparent cohesion was lowest at 45°, whereas the apparent friction angle was lowest at 90°. An orientation-dependent Duncan–Chang extension was developed for the prescribed LUU path by parameterizing K, n, Rf, c, and φ as functions of α. An internal hold-out check at α = 60° gave parameter deviations of 2.1% or less, supporting interpolation within the investigated orientation range. Accordingly, the formulation is interpreted as an empirical fixed-orientation relation for the investigated LUU path.
- Open Access
Optimization of Mix Proportions for Flexible Ecological Concrete Blankets in Slope Restoration: An Experimental Study
Ecological concrete (EC) is a promising material that offers both effective surface protection in engineering and contributes to ecological restoration. However, it remains a significant challenge to improve bending resistance and tensile strength simultaneously, particularly for slope ecological restoration, where these properties are essential. This study employs an orthogonal experimental design to evaluate the effects of various factors, including water–cement ratio, coarse aggregate, fly ash, and metakaolin on the performance of EC, with the goal of determining an optimal mix ratio that satisfies both porosity and compressive strength requirements. The results indicate that, when the water–cement ratio is 0.30, the coarse aggregate particle size is 3–6 mm, the fly ash content is 15%, and metakaolin content is 10%, the EC achieves superior performance with a compressive strength of 18.3 MPa and a porosity of 29%. Then, a flexible ecological concrete blanket (FECB) is subsequently proposed utilizing this optimized EC mix. The FECB demonstrates excellent bending performance and a tensile strength of 4.2 MPa. This innovative FECB not only expands the application potential of EC in engineering but also provides a promising solution for future slope surface protection materials.
Open AccessOptimization of Mix Proportions for Flexible Ecological Concrete Blankets in Slope Restoration: An Experimental Study
Ecological concrete (EC) is a promising material that offers both effective surface protection in engineering and contributes to ecological restoration. However, it remains a significant challenge to improve bending resistance and tensile strength simultaneously, particularly for slope ecological restoration, where these properties are essential. This study employs an orthogonal experimental design to evaluate the effects of various factors, including water–cement ratio, coarse aggregate, fly ash, and metakaolin on the performance of EC, with the goal of determining an optimal mix ratio that satisfies both porosity and compressive strength requirements. The results indicate that, when the water–cement ratio is 0.30, the coarse aggregate particle size is 3–6 mm, the fly ash content is 15%, and metakaolin content is 10%, the EC achieves superior performance with a compressive strength of 18.3 MPa and a porosity of 29%. Then, a flexible ecological concrete blanket (FECB) is subsequently proposed utilizing this optimized EC mix. The FECB demonstrates excellent bending performance and a tensile strength of 4.2 MPa. This innovative FECB not only expands the application potential of EC in engineering but also provides a promising solution for future slope surface protection materials.
- Open Access
Experimental Investigation on Mechanical Properties of Flexible Concrete Blanket Under Freeze–Thaw Cycles
Flexible concrete blankets (FCBs) are emerging as a promising material for slope protection and surface stabilization, offering advantages of light weight, ease of installation, and environmental adaptability. This study investigates the mechanical properties, freeze–thaw resistance, and microstructural evolution of FCBs fabricated with varying cement–sand ratios and high alumina cement dosages. A series of mechanical tests, including compressive, flexural, and tensile strength evaluations, were conducted alongside freeze–thaw cycling tests (up to 125 cycles) to assess mass loss and strength retention. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were employed to elucidate the hydration mechanisms and damage evolution at the microstructural level. The results demonstrate that FCBs exhibit ductile failure behavior, with peak tensile strengths ranging from 3.1 to 4.5 MPa and tensile strain capacities ranging from 5 to 16%. The optimal mix achieved a compressive strength of 51.2 MPa after 28 days of curing. Freeze–thaw cycling induced a two-stage degradation pattern, with damage initiation occurring at approximately 50 cycles and significant deterioration beyond 75 cycles. After 125 cycles, mass loss ranged from 4.39% to 4.99%, and compressive strength retention varied between 78% and 83%, depending on the mix composition. Mixtures with balanced cement–sand ratios (1:1) and moderate Portland cement content demonstrated superior frost resistance, whereas high alumina cement-rich mixtures exhibited pronounced structural loosening due to phase transformations of unstable hydration products. These findings provide a theoretical and experimental basis for optimizing the composition of FCBs to achieve enhanced mechanical performance and durability in cold-region engineering applications.
Open AccessExperimental Investigation on Mechanical Properties of Flexible Concrete Blanket Under Freeze–Thaw Cycles
Flexible concrete blankets (FCBs) are emerging as a promising material for slope protection and surface stabilization, offering advantages of light weight, ease of installation, and environmental adaptability. This study investigates the mechanical properties, freeze–thaw resistance, and microstructural evolution of FCBs fabricated with varying cement–sand ratios and high alumina cement dosages. A series of mechanical tests, including compressive, flexural, and tensile strength evaluations, were conducted alongside freeze–thaw cycling tests (up to 125 cycles) to assess mass loss and strength retention. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were employed to elucidate the hydration mechanisms and damage evolution at the microstructural level. The results demonstrate that FCBs exhibit ductile failure behavior, with peak tensile strengths ranging from 3.1 to 4.5 MPa and tensile strain capacities ranging from 5 to 16%. The optimal mix achieved a compressive strength of 51.2 MPa after 28 days of curing. Freeze–thaw cycling induced a two-stage degradation pattern, with damage initiation occurring at approximately 50 cycles and significant deterioration beyond 75 cycles. After 125 cycles, mass loss ranged from 4.39% to 4.99%, and compressive strength retention varied between 78% and 83%, depending on the mix composition. Mixtures with balanced cement–sand ratios (1:1) and moderate Portland cement content demonstrated superior frost resistance, whereas high alumina cement-rich mixtures exhibited pronounced structural loosening due to phase transformations of unstable hydration products. These findings provide a theoretical and experimental basis for optimizing the composition of FCBs to achieve enhanced mechanical performance and durability in cold-region engineering applications.