Gaofei Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gaofei Yan has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Linsong Cheng
4 shared publications- Renyi Cao
College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
3 shared publications - Baobiao Pu
College of Petroleum Engineering, China University of Petroleum 1 , Beijing 102249
2 shared publications Japan Trivedi
School of Mining and Petroleum, Department of Civil and Environmental Engineering, University of Alberta 2 , Edmonton, Alberta T6G 1H9
2 shared publications- Xinyi Zheng
College of Petroleum Engineering, China University of Petroleum 1 , Beijing 102249
2 shared publications - Binyu Wang1 shared publication
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Pore-scale two-phase displacement under coupled wettability and pore-throat evolution
Immiscible two-phase displacement in porous media can become history dependent when wettability and pore-throat structure evolve during prolonged fluid injection, because capillary accessibility, hydraulic transmission, and phase connectivity change with the displacement path. Here, an experimentally constrained pore-network framework is used to isolate the individual and coupled effects of wettability alteration and pore-throat evolution over sequentially inherited pore-volume (PV) states. Wettability alteration produces the stronger individual displacement response by modifying capillary-entry conditions, whereas pore-throat evolution primarily enhances hydraulic transmission and increases network-scale permeability by 25.47% at 2000 PV. Their simultaneous activation yields a sub-additive displacement response, indicating that the two pathways partly act on overlapping portions of the accessible remaining-oil population. As displacement proceeds, oil associated with relatively connected regions is preferentially depleted, and the surviving inventory becomes increasingly concentrated in hydraulically disconnected states; isolated dispersed oil accounts for approximately 77% of the remaining oil in the coupled case at 2000 PV. This connectivity redistribution produces a pronounced history dependence of relative permeability, demonstrating that phase flow capacity cannot be described by saturation alone when interfacial and structural states evolve. These results identify a pore-scale mechanism for history-dependent multiphase transport under coupled wettability and structural evolution, while the quantitative PV-dependent relationships are specific to the investigated sandstone waterflooding system rather than universal.
- 1 November 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Pore-scale two-phase displacement under coupled wettability and pore-throat evolution
Immiscible two-phase displacement in porous media can become history dependent when wettability and pore-throat structure evolve during prolonged fluid injection, because capillary accessibility, hydraulic transmission, and phase connectivity change with the displacement path. Here, an experimentally constrained pore-network framework is used to isolate the individual and coupled effects of wettability alteration and pore-throat evolution over sequentially inherited pore-volume (PV) states. Wettability alteration produces the stronger individual displacement response by modifying capillary-entry conditions, whereas pore-throat evolution primarily enhances hydraulic transmission and increases network-scale permeability by 25.47% at 2000 PV. Their simultaneous activation yields a sub-additive displacement response, indicating that the two pathways partly act on overlapping portions of the accessible remaining-oil population. As displacement proceeds, oil associated with relatively connected regions is preferentially depleted, and the surviving inventory becomes increasingly concentrated in hydraulically disconnected states; isolated dispersed oil accounts for approximately 77% of the remaining oil in the coupled case at 2000 PV. This connectivity redistribution produces a pronounced history dependence of relative permeability, demonstrating that phase flow capacity cannot be described by saturation alone when interfacial and structural states evolve. These results identify a pore-scale mechanism for history-dependent multiphase transport under coupled wettability and structural evolution, while the quantitative PV-dependent relationships are specific to the investigated sandstone waterflooding system rather than universal.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Progressive wettability alteration during high-flux waterflooding: Pore-scale oil-phase mobilization pathways and pore–throat structural control
Progressive wettability alteration (PWA) under high-flux waterflooding reorganizes residual-oil topology, yet the pore-scale mobilization pathways remain incompletely resolved. We combine MnCl2-assisted D2O nuclear magnetic resonance core flooding [pore-area (PA) = 50 m and Ca = 1.805 × 10−6] with two-phase lattice Boltzmann simulations in which wettability evolves as a PA-controlled, spatially non-uniform boundary condition. The short-T2 signal tracks discontinuous remnants (films and droplets). As wettability shifts from oil-wet toward weakly water-wet conditions, discontinuous oil exhibits retention followed by mobilization, concurrent with partial remobilization of connected oil; the effect is stronger in higher-permeability cores. Simulations attribute this behavior to two coupled force balances: for trapped ganglia, a spatially non-uniform, time-evolving contact angle perturbs the balance between geometry-imposed capillarity and the driving pressure gradient; for wall-bound films, viscous shear competes with wettability trapping, and PWA weakens trapping to promote beading, breakup, and detachment along high-flux pathways. We characterize the relative pace of wettability alteration vs preferential-pathway organization using Π, defined as the PA required for substantial wettability alteration divided by the PA at water breakthrough. High Π (>2.5) yields a delayed, long-tail response dominated by film retention and late-time remobilization, whereas reducing Π by 20× decreases film-related events by >40% and shifts the dominant response toward invasion-concurrent ganglion mobilization. Pore–throat structure further controls Π and the exposure footprint: well-connected structure #1 supports multi-spot alteration and stronger late-time reactivation, yielding a 7.2-point efficiency gain at PA = 2200 μm. In strongly heterogeneous structure #3, earlier breakthrough localizes flow into a shear-dominated channel, limiting the gain to 2.2 points.
- 1 April 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (4)
Progressive wettability alteration during high-flux waterflooding: Pore-scale oil-phase mobilization pathways and pore–throat structural control
Progressive wettability alteration (PWA) under high-flux waterflooding reorganizes residual-oil topology, yet the pore-scale mobilization pathways remain incompletely resolved. We combine MnCl2-assisted D2O nuclear magnetic resonance core flooding [pore-area (PA) = 50 m and Ca = 1.805 × 10−6] with two-phase lattice Boltzmann simulations in which wettability evolves as a PA-controlled, spatially non-uniform boundary condition. The short-T2 signal tracks discontinuous remnants (films and droplets). As wettability shifts from oil-wet toward weakly water-wet conditions, discontinuous oil exhibits retention followed by mobilization, concurrent with partial remobilization of connected oil; the effect is stronger in higher-permeability cores. Simulations attribute this behavior to two coupled force balances: for trapped ganglia, a spatially non-uniform, time-evolving contact angle perturbs the balance between geometry-imposed capillarity and the driving pressure gradient; for wall-bound films, viscous shear competes with wettability trapping, and PWA weakens trapping to promote beading, breakup, and detachment along high-flux pathways. We characterize the relative pace of wettability alteration vs preferential-pathway organization using Π, defined as the PA required for substantial wettability alteration divided by the PA at water breakthrough. High Π (>2.5) yields a delayed, long-tail response dominated by film retention and late-time remobilization, whereas reducing Π by 20× decreases film-related events by >40% and shifts the dominant response toward invasion-concurrent ganglion mobilization. Pore–throat structure further controls Π and the exposure footprint: well-connected structure #1 supports multi-spot alteration and stronger late-time reactivation, yielding a 7.2-point efficiency gain at PA = 2200 μm. In strongly heterogeneous structure #3, earlier breakthrough localizes flow into a shear-dominated channel, limiting the gain to 2.2 points.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Mechanisms of displacement–imbibition coupling in shale reservoirs: Physical experiments and three-dimensional lattice Boltzmann modeling
Displacement–imbibition oil production is regarded as a promising technology to enhance the oil recovery (EOR) of shale oil reservoirs. To investigate the microscopic mechanisms and flow behaviors governed by pore–throat structures and fracture types, we first performed single-phase core displacement experiments to characterize the nonlinear flow responses. Subsequently, a real-time physical simulation apparatus for displacement–imbibition was independently designed based on nuclear magnetic resonance (NMR) technology. This setup enabled the characterization of realistic fracture morphologies in artificial cubic cores, and the systematic examination of the influence of fracture types on oil production. Finally, a three-dimensional lattice Boltzmann model incorporating nonlinear flow characteristics was developed for the injection–shut-in–production process to investigate oil–water flow dynamics at the pore scale. The results show that pressure oscillation and capillary imbibition are the key drivers of oil production. By altering the pressure field of matrix pores, the combined driving forces of displacement and imbibition lower the utilization threshold of pore-throat and achieve more uniform pore utilization. The pore–throat structure governs efficiency, as porous media with weaker nonlinear flow effects and stronger connectivity exhibit lower resistance to oil–water exchange. Fractures significantly influence fluid exchange, and the more complex the contact between the matrix and fractures, the easier it is for oil to be displaced. Maximizing the effect of displacement–imbibition while avoiding water channeling is essential. These findings enhance understanding of multiphase displacement dynamics and support water-injection EOR technologies.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Mechanisms of displacement–imbibition coupling in shale reservoirs: Physical experiments and three-dimensional lattice Boltzmann modeling
Displacement–imbibition oil production is regarded as a promising technology to enhance the oil recovery (EOR) of shale oil reservoirs. To investigate the microscopic mechanisms and flow behaviors governed by pore–throat structures and fracture types, we first performed single-phase core displacement experiments to characterize the nonlinear flow responses. Subsequently, a real-time physical simulation apparatus for displacement–imbibition was independently designed based on nuclear magnetic resonance (NMR) technology. This setup enabled the characterization of realistic fracture morphologies in artificial cubic cores, and the systematic examination of the influence of fracture types on oil production. Finally, a three-dimensional lattice Boltzmann model incorporating nonlinear flow characteristics was developed for the injection–shut-in–production process to investigate oil–water flow dynamics at the pore scale. The results show that pressure oscillation and capillary imbibition are the key drivers of oil production. By altering the pressure field of matrix pores, the combined driving forces of displacement and imbibition lower the utilization threshold of pore-throat and achieve more uniform pore utilization. The pore–throat structure governs efficiency, as porous media with weaker nonlinear flow effects and stronger connectivity exhibit lower resistance to oil–water exchange. Fractures significantly influence fluid exchange, and the more complex the contact between the matrix and fractures, the easier it is for oil to be displaced. Maximizing the effect of displacement–imbibition while avoiding water channeling is essential. These findings enhance understanding of multiphase displacement dynamics and support water-injection EOR technologies.