MNMichaela Nováková

Michaela Nováková

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Michaela Nováková has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reply on RC3

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    Reply on RC2

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    Reply on RC1

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    Comment on egusphere-2026-3512

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    Comment on egusphere-2026-3512

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    Comment on egusphere-2026-3512

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    A comprehensive TLS-based framework for cave ice monitoring under adverse surface conditions: application at Scărișoara Ice Cave

    by Jozef Šupinský, Aurel Perşoiu, Michaela Nováková, Michal Gallay, Ján Kaňuk

    Rapid degradation of cryospheric components requires reliable quantification of volumetric change to understand the leading processes and mechanisms behind the loss of ice. However, such monitoring in cave systems, a particularly complex morphological and climatic environment, remains methodologically challenging due to irregular geometry, limited accessibility, and increasingly dynamic ice-surface conditions. This study presents a comprehensive terrestrial laser scanning (TLS) data-processing framework from noise assessment, surface reconstruction, 3D volumetric change computation and error propagation as a transferable methodology for reliable monitoring of cave ice change even under suboptimal data acquisition conditions. The framework is demonstrated at Scărișoara Ice Cave (Romania) using three annual campaigns acquired with pulse-based and phase-shift scanners under conditions ranging from optimal dry and frozen surfaces to widespread meltwater presence. Scanner-specific noise assessment on different ice surface types reveals pronounced range, intensity and incidence angle dependent errors, demanding an efficient filtering strategy that reduces point cloud dispersion. A hybrid Poisson–MeshFix reconstruction strategy effectively fills meltwater-induced data gaps, reducing modelling error by up to five times. Multiresolution modelling tests show that 5 cm resolution provides an optimal balance between volumetric precision and computational efficiency with errors under 1 % compared to finer resolution models. Comparison of conventionally applied 2.5D change detection and 3D approach reveals ~20 % volumetric discrepancy, confirming that full 3D analysis is essential in such geometrically complex settings. The results reveal a cumulative ice loss of 1521 ± 65 m³ over three years, with heterogeneous spatial patterns controlled by cave morphology and drip-water distribution. Our data clearly shows that omitting any of the evaluated processing steps would greatly bias the volume estimates.

  • Open Access

    Damage assessment of severe wind events using mobile field mapping and remote sensing: A case study of the Hažlín tornado, Slovakia

    by Tomáš Fedor, Michaela Nováková, Katarína Onačillová

    An increasing frequency of severe weather events, including damaging winds and tornadoes, poses significant hazards to infrastructure, ecosystems, and society (Fischer et al., 2025). Accurate and rapid surveys of damage caused by severe convective wind events remain challenging, yet they are essential for understanding impacts, refining wind-damage classification schemes, and improving severe weather databases. This study demonstrates an integrated workflow that combines a GIS-based mobile field-mapping application with multi-scale remote sensing data (UAV imagery and high-resolution satellite observations) to document and assess severe wind damage using the new International Fujita Scale (ESSL 2023). The approach is demonstrated through a case study of a tornado and associated severe wind damage near Hažlín in eastern Slovakia. A configurable mobile mapping platform tailored for damage surveys was used by the field team to collect standardized, georeferenced damage observations, damage type and intensity, and photographic documentation. Complementing the field mapping, high-resolution UAV surveys and pre-/post-event satellite imagery supported detailed characterization of vegetation and structural damage patterns at spatial scales unattainable from ground surveys alone. By integrating standardized field observations with remote sensing, the proposed approach improves damage classification accuracy and contributes to severe-wind climatological databases. ESSL: International Fujita (IF) Scale, https://www.essl.org/cms/research-projects/international-fujita-scale/ (last access: 12 January 2025), 2023.Fischer, J., Groenemeijer, P., Holzer, A., Feldmann, M., Schröer, K., Battaglioli, F., Schielicke, L., Púčik, T., Antonescu, B., Gatzen, C., and TIM Partners: Invited perspectives: Thunderstorm intensification from mountains to plains, Nat. Hazards Earth Syst. Sci., 25, 2629–2656, https://doi.org/10.5194/nhess-25-2629-2025, 2025.

  • Open Access

    Deep-learning classification of cave-floor surface types from LiDAR data for detailed cave mapping

    by Michaela Nováková, Jozef Šupinský, Jozef Širotník

    High-resolution 3D mapping of subterranean environments remains challenging due to their complex geometry, low-light conditions, and restricted accessibility. Among these environments, caves represent particularly demanding settings where detailed spatial documentation is essential for monitoring processes, supporting exploration and conservation efforts. Laser scanning has become a key technique for capturing accurate and detailed 3D representations of caves that form the basis for this heritage documentation and multidisciplinary research. Despite these advances, the creation of cave maps still commonly relies on traverse-line measurements and field sketches, later digitized using specialized cave-surveying software. In recent years, LiDAR data have been used for deriving the cave extent. While this method effectively captures the general geometry of cave passages, the delineation of cave-floor units, sediments, speleothems, rock blocks, and other features remains largely manual and relies heavily on the surveyor’s interpretation. As a result, feature boundaries vary between authors, and detailed cave-surface representation lacks reproducibility that is problematic for long-term documentation. In this study, we explore the use of deep-learning semantic segmentation for classifying selected cave-floor surface types based on geometric features derived from LiDAR data. Building on previous work focused on semi-automatic cave-map generation from LiDAR point clouds, we extend the workflow from deriving cave extent and floor morphology toward the automated interpretation of surface materials and forms. The method was tested on several common cave-floor surface types, including clastic sediments, flowstone, and bedrock, as well as artificial surfaces and objects typical in showcaves. The resulting classifications show that deep-learning models can distinguish surfaces with subtle geometric differences and produce consistent, reproducible delineations of units that are traditionally mapped by hand. Compared with manual digitization, the approach reduces subjectivity and provides a scalable way to generate polygonal layers used in speleocartographic workflows.