ZWZeyu Wang

Zeyu Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zeyu Wang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:

  • Le Yu

    College of Electronics and Electrical Engineering Harbin University of Science and Technology Harbin China

    5 shared publications
  • Linlin Tan

    School of Electrical Engineering Southeast University Nanjing China

    4 shared publications
  • Yanling Lv

    College of Electronics and Electrical Engineering Harbin University of Science and Technology Harbin China

    4 shared publications
  • Yuxuan Zhang

    School of Electrical Engineering Southeast University Nanjing China

    3 shared publications
  • Kailin Hu

    College of Electronics and Electrical Engineering Harbin University of Science and Technology Harbin China

    2 shared publications
  • Shujia Xu

    1 shared publication

Latest Publications

  • A Multi‐Mode Wireless Power Transfer Charging System Based on Transmitter Side Reconfigurability

    by Le Yu, Kailin Hu, Zeyu Wang, Yanling Lv

    To extend life span of lithium‐ion batteries and meet the charging requirements in most industrial applications, a wireless power transfer (WPT) system must not only provide load‐independent constant current (CC) and constant voltage (CV) outputs but also be capable of supporting multiple output specifications. This paper proposes a multi‐mode WPT system based on a reconfigurable magnetic integrated primary side coil. By configuring the primary side structure, the proposed system can selectively implement a two‐coil structure in CC mode and two different three‐coil structures in two CV modes. The system can meet single current output mode and two different voltage output specifications to meet different lithium‐ion batteries charging needs. Therefore, the designed system has strong versatility. Second, a mathematical model is established and the load‐independent CC output and multi‐mode CV output characteristics and zero phase angle (ZPA) operation of the system are analyzed in detail. Finally, this paper describes the construction of an experimental prototype capable of delivering a 2.7‐A current output and two different voltage output specifications including 56 and 68 V to prove the feasibility of the proposed system.

  • A Constant Current and Constant Voltage Self‐Switching Wireless Power Transfer System Based on S‐CL‐S Compensation

    by Le Yu, Zeyu Wang, Yuxuan Zhang, Zhijun Wu, Linlin Tan, Yanling Lv

    Traditional wireless power transfer (WPT) systems suffer from numerous drawbacks when switching between constant current (CC) and constant voltage (CV) modes, such as increasing system complexity, reducing transmission efficiency, and requiring additional detection of the battery state of charge (SOC), among other issues. To address these problems, this paper proposes a method for the automatic switching between CC and CV modes. This method eliminates the need for additional control modules, wireless communication links, and battery SOC detection, enabling automatic switching between two modes while ensuring the system operates in a zero‐phase‐angle (ZPA) state. Furthermore, the system features open‐circuit self‐protection and a high degree of design flexibility. Compared with existing solutions, the receiver side of the proposed system is more compact, making it particularly suitable for applications demanding high space utilization. To verify the feasibility and practicality of the proposed scheme, an experimental prototype with a charging current of 2 A and a charging voltage of 79 V is constructed. Experimental results validate the correctness of the theoretical analysis, and the maximum efficiency of the system reaches 95.19%.

  • Multiple Design Methods for Constant Current Wireless Power Transfer Systems Without Receiver Compensation

    by Le Yu, Zeyu Wang, Yuxuan Zhang, Shujia Xu, Linlin Tan, Yanling Lv

    The traditional wireless power transmission (WPT) system has a complex receiver compensation structure, many compensation components, and the output characteristics are significantly affected by the parameters of the magnetic coupler. In this paper, three WPT system topologies without compensation at the receiver are proposed. The proposed topology can decouple the output current from the load without compensation at the receiver and ensure the system works at zero phase angle (ZPA). Compared with the traditional scheme, the proposed system has obvious advantages in structure compactness, effectively reducing the hardware cost of the system and improving the structure compactness. Among them, for the three coil structure, the use of magnetic integration technology can further reduce the number of components, which can meet the design requirements under the condition of only a single compensation component. In addition, two kinds of structures in the proposed topology can realize the decoupling between the output current and the parameters of the magnetic coupler. Finally, taking the double coil structure as an example, an experimental prototype with an output current of 2 A is built. The experimental results show that the system can achieve stable and constant current output while maintaining high transmission efficiency, and the maximum efficiency can reach 94.68%.

  • Open Access

    Design of a Wireless Power Transfer System for Lithium Battery Charging with Constant Current and Constant Voltage Self-Switching

    by Le Yu, Zeyu Wang, Shujia Xu, Yuxuan Zhang, Zhijun Wu, Linlin Tan, Yanling Lv

    In the process of lithium battery charging in traditional wireless power transmission (WPT) system, there are many defects when switching between constant current (CC) mode and constant voltage (CV) mode. Such as increasing system complexity, reducing transmission efficiency, and requiring additional detection of the battery state of charge (SOC), among other issues. To address these problems, this paper proposes a method for the automatic switching between CC and CV modes. This method eliminates the need for additional control modules, wireless communication links, and battery SOC detection, enabling automatic switching between two modes while ensuring the system operates in a zero-phase-angle (ZPA) state. Furthermore, the system features open circuit self protection and a high degree of design flexibility. Compared with existing solutions, the receiver side of the proposed system is more compact, making it particularly suitable for applications demanding high space utilization. To verify the feasibility and practicality of the proposed scheme, an experimental prototype with a charging current of 2 A and a charging voltage of 79 V is constructed. Experimental results validate the correctness of the theoretical analysis, and the maximum efficiency of the system reaches 95.19%.

  • The Research on an Adaptive Fault‐Tolerant WPT System With Constant Current and Constant Voltage Output Based on Active Rectification

    by Zeyu Wang, Le Yu, Linlin Tan, Kailin Hu, Yanling Lv

    To meet the dynamic charging requirements in practical applications, the WPT system must not only achieve constant current and constant voltage output independent of the load, but also have a certain degree of adaptive fault tolerance. However, some existing methods suffer from issues such as an excessive number of compensating components and the requirement for additional communication circuits. To avoid the aforementioned problems, this paper proposes a phase‐shift control method based on active rectification and utilizes the LCL‐S compensation topology, which possesses constant voltage output characteristics. Constant current output independent of load is achieved by adjusting the phase‐shift angle of the active rectifier. Based on this, by adjusting the phase‐shift angle of the active rectifier, a wide range of constant voltage and constant current output can still be achieved during coil offset, which effectively simplifies system control and increases system stability. In addition, to further improve the dynamic response speed and control accuracy of the system when it is in CC output, fuzzy control is added to regulate the rectifier. Considering that the compensation components will change with temperature in practical conditions, this paper explores in detail the impact of each compensation component on the system output. Finally, an experimental prototype is built to verify the feasibility of the theoretical analysis, with the output voltage controlled at 30 V and the output current at 2 A. Experimental results show that, within the coupling coefficient range of 0.21–0.32, the fluctuation rates of the system output voltage and output current are only 1.0% and 1.5%, respectively.