SJShuaiqiang Jia

Shuaiqiang Jia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shuaiqiang Jia has a total of 45 co-authors. Here are the top co-authors by number of shared publications:

  • Buxing Han

    Institute of Chemistry, Chinese Academy of Sciences

    15 shared publications
  • Haihong Wu

    Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China

    15 shared publications
  • Mingyuan He

    Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China

    14 shared publications
  • Xiao Chen

    Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China

    14 shared publications
  • Cheng Xue

    Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China

    13 shared publications
  • Mengke Dong

    Shanghai Key Laboratory of Green Chemistry and Chemical Processes, State Key Laboratory of Petroleum Molecular & Process Engineering, School of Chemistry and Molecular Engineering East China Normal University Shanghai China

    13 shared publications

Latest Publications

  • Electrosynthesis of p ‐Hydroxybenzoic Acid From Phenol and CO 2

    by Mengke Dong, Shuaiqiang Jia, Xiao Chen, Jiapeng Jiao, Cheng Xue, Zhanghui Xia, Ting Deng, Mingjie Chen, Chunjun Chen, Kaiwu Dong, et al.

    P ‐hydroxybenzoic acid ( p ‐HBA), with wide applications in food preservatives, pesticides, pharmaceuticals, and liquid crystalline polyether, is currently synthesized via the Kolbe–Schmitt reaction using anhydrous phenolate (PhO − ) and carbon dioxide (CO 2 ). However, this reaction typically suffers from poor selectivity, and requires high temperature/pressure, strongly base, and metal/organic cations for selectivity control. Herein, we report a new method for the electrosynthesis of p ‐HBA from phenol (PhOH) and CO 2 by iodine mediation, achieving 61% yield and 90% selectivity without strong bases and metal cations under ambient temperature and pressure conditions. Mechanism studies indicated that PhOH was first selectively iodinated by iodine cations (I + ) generated at the anode to form p ‐iodophenol (HOPh‐I). Subsequently, HOPh‐I and CO 2 were respectively activated on Ag catalyst with abundant grain boundaries (GB‐Ag) through single‐electron reduction, and then underwent radical coupling processes to produce p ‐HBA. Notably, this electrochemical method also successfully converted various oxygen‐containing and nitrogen‐containing aromatic compounds, including the typical structural units of lignin and its derivatives, into valuable carboxylic acids. This innovative electrochemical approach overcomes the inherent limitations of the traditional Kolbe–Schmitt reaction, offering a promising strategy for the sustainable utilization of CO 2 and biomass resources.

  • Electrosynthesis of p ‐Hydroxybenzoic Acid From Phenol and CO 2

    by Mengke Dong, Shuaiqiang Jia, Xiao Chen, Jiapeng Jiao, Cheng Xue, Zhanghui Xia, Ting Deng, Mingjie Chen, Chunjun Chen, Kaiwu Dong, et al.

    P ‐hydroxybenzoic acid ( p ‐HBA), with wide applications in food preservatives, pesticides, pharmaceuticals, and liquid crystalline polyether, is currently synthesized via the Kolbe–Schmitt reaction using anhydrous phenolate (PhO − ) and carbon dioxide (CO 2 ). However, this reaction typically suffers from poor selectivity, and requires high temperature/pressure, strongly base, and metal/organic cations for selectivity control. Herein, we report a new method for the electrosynthesis of p ‐HBA from phenol (PhOH) and CO 2 by iodine mediation, achieving 61% yield and 90% selectivity without strong bases and metal cations under ambient temperature and pressure conditions. Mechanism studies indicated that PhOH was first selectively iodinated by iodine cations (I + ) generated at the anode to form p ‐iodophenol (HOPh‐I). Subsequently, HOPh‐I and CO 2 were respectively activated on Ag catalyst with abundant grain boundaries (GB‐Ag) through single‐electron reduction, and then underwent radical coupling processes to produce p ‐HBA. Notably, this electrochemical method also successfully converted various oxygen‐containing and nitrogen‐containing aromatic compounds, including the typical structural units of lignin and its derivatives, into valuable carboxylic acids. This innovative electrochemical approach overcomes the inherent limitations of the traditional Kolbe–Schmitt reaction, offering a promising strategy for the sustainable utilization of CO 2 and biomass resources.

  • Efficient Electrooxidation of Methane to Formic Acid by Optimizing Both the Inner-Sphere and Outer-Sphere Reactions

    by Mingjie Cheng, Chunjun Chen, Yingxuan Liu, Yajuan Wang, Xia Bai, Xinyu Zou, Xiao Chen, Mengke Dong, Shuaiqiang Jia, Haihong Wu, et al.

    Electrooxidation CH4 into valuable, easily transportable liquid fuels offers a highly promising route for the energy-efficient use of CH4. However, achieving high apparent Faradaic efficiency (aFE) and product formation rate is challenging. In this work, we report a heterogeneous WO3 modified Bi (WO3-Bi) incorporated with homogeneous Fe2+ catalytic system in 0.1 M HClO4, which can efficiently electrooxidation CH4 into HCOOH by O2 at the cathode. The aFE of HCOOH can reach up to 96.0%, and the formation rate of HCOOH is 7.9 μmol h–1 cm–2. Experiments and theoretical calculations indicate that the WO3 can not only improve the formation of H2O2 from O2 by enhancing the adsorption of *OOH but also promote the decomposition of H2O2 into •OH radicals by tuning the hydrogen-bond structure of interfacial H2O. The synergy between these two parts facilitates the oxidation of CH4 into HCOOH.

  • Oxygen Reduction Intermediates Facilitate Stable and Efficient CO 2 Electroreduction to Multicarbon Products in an Acidic Electrolyte

    by Jiapeng Jiao, Xinchen Kang, Jiahao Yang, Shuaiqiang Jia, Shiqiang Liu, Xiao Chen, Cheng Xue, Zhanghui Xia, Mengke Dong, Ting Deng, et al.

    CO2 electroreduction in an acidic electrolyte with low alkali cation concentrations is an effective approach to mitigate the salting-out effect and achieve stable catalysis. However, the competitive hydrogen evolution reaction (HER) becomes more significant due to the high proton concentration. In this study, we introduce, for the first time, O2 generated at the anode into the CO2 gas feed during electroreduction to enhance C2+ products formation. Compared with pure CO2, the addition of 1% O2 to the gas phase increases the Faradaic efficiency (FE) for C2+ products from 31.2% to 77.6% over a Cu&Fe–N4C electrode at a current density of 400 mA cm–2 in an acidic electrolyte containing 0.5 M K+ (pH = 1). The low K+ concentration effectively suppresses the salting-out effect, enabling stable operation for 100 h. Mechanistic studies reveal that •OH and •OOH radicals, derived from the oxygen reduction reaction (ORR), play distinct roles, with •OH promoting C–C coupling and •OOH selectively inhibiting HER, together accounting for the high FEC2+ achieved in an acidic electrolyte.

  • Hydroxyl-Defined Lewis Base Interface Directs Hole Routing in Cooperative Photoredox Catalysis

    by Xinyu Zou, Kang Liu, Zhenyuan Teng, Lihong Jing, Yunshuo Yang, Chensheng Xian, Azam Khan, Yuepeng Wang, Xiaoyu Zhang, Jing Zhou, et al.

    Directing photogenerated carriers toward productive coupled redox chemistry is central to solar-to-chemical energy conversion, yet the interfacial chemical basis governing carrier routing remains elusive. Here, we establish a hydroxyl-defined Lewis base interface as a chemically programmed platform for coupling hole-selective extraction with cooperative photoredox catalysis. By in situ constructing crystalline In(OH)3 on ultrathin ZnIn2S4 nanosheets (ZISO), a hydroxyl-associated interfacial architecture enriched with lattice hydroxyl Lewis base sites is created, enabling selective regulation of oxidation-side carrier dynamics. Femtosecond transient spectroscopic and surface photovoltage measurements reveal that the hydroxyl-defined interface promotes hole-selective interfacial extraction, suppresses charge recombination, and preserves reduction-side electron population for the reduction reaction. Consequently, photooxidative thiophenol valorization via dehydrogenative coupling proceeds at a rate of 33.5 mmol g–1 h–1 and is efficiently integrated with CO2 photoreduction in a cooperative photoredox process. Density functional theory calculations further show that the hydroxyl-defined interface generates cooperative adsorption configurations that promote electronic polarization and substrate activation, stabilize key reaction intermediates, and lower the energetic requirements for CO2 reduction. As a result, the hydroxyl-defined interface translates directional carrier dynamics into interfacial redox turnover, enabling efficient cooperative photoredox catalysis. This work reveals that chemically explicit interfacial functionality can be leveraged to integrate carrier-selective routing and catalytic redox chemistry, providing an interfacial design principle for cooperative photoredox systems in solar-to-chemical energy conversion.


  • Open Access

    Synergistic Cu nanowires/COF hybrid catalyst for high-efficiency CO2 electroreduction to C2+ products

    by Mingyu Wang, Shuaiqiang Jia, Hailian Cheng, Xiao Chen, Cheng Xue, Ting Deng, Mengke Dong, Zhanghui Xia, Mingjie Cheng, Chunjun Chen, et al.

    The electrocatalytic CO 2 reduction reaction (eCO 2 RR) to high-value-added products is a highly promising strategy for alleviating the energy crisis and reducing carbon emissions. However, traditional Cu-based catalysts exhibit weak adsorption of CO 2 and low *CO intermediates coverage on their surfaces, leading to poor selectivity toward multi-carbon products. In this study, a hybrid structure comprising Cu nanowires and a covalent organic framework (Cu NWs@COF) was constructed, leveraging their synergistic effect to significantly enhance the performance of CO 2 electroreduction. The developed catalyst achieves a Faradaic efficiency (FE) of 77% for C 2+ products, with a current density of 227.4 mA cm − 2 , substantially outperforming unmodified Cu nanowires in alkaline electrolyte. Moreover, the catalyst also significantly enhances C 2+ products selectivity in both acidic and neutral electrolytes. Experimental results demonstrate that the incorporation of COF optimizes the local microenvironment of the Cu surface, strengthens the adsorption of CO 2 and the key *CO intermediate, and lowers the energy barrier for C–C coupling, thereby effectively promoting the formation of C 2+ products. This work provides a novel approach for designing high-performance electrocatalysts by constructing hybrid structures with organic frameworks to modulate the catalytic microenvironment.

  • Direct Electrosynthesis of Glycolate From Carbon Dioxide

    by Xiao Chen, Shuaiqiang Jia, Jianxin Zhai, Jiapeng Jiao, Mengke Dong, Cheng Xue, Ting Deng, Zhanghui Xia, Mingjie Cheng, Chunjun Chen, et al.

    Electrocatalytic carbon dioxide reduction reaction (CO 2 RR) is an attractive and green technology that can convert renewable electricity into high‐energy‐density fuel, which is of great significance for alleviating the dual pressures of energy and environmental concern. Although the electrosynthesis of some C 2 products (e.g., ethylene, acetate, and ethanol) has achieved certain success, the generation of glycolate is still beyond the scope of existing electrocatalytic technologies. Here, we report the electrochemical reaction of direct conversion of CO 2 to glycolate in aqueous media under ambient conditions using unsaturated Cu sites as the catalyst, with a production rate of glycolate up to 305 ± 24 mmol h −1 g −1 . Further mechanism studies have shown that the key to glycolate generation is the formation and timely desorption of the *OHCCHO intermediate after C–C coupling, followed by a disproportionation reaction with base to generate the product. This work provides a successful case for the sustainable synthesis of glycolic acid from CO 2 in aqueous media, which represents a new product from electrocatalytic CO 2 RR.

  • Direct Electrosynthesis of Glycolate From Carbon Dioxide

    by Xiao Chen, Shuaiqiang Jia, Jianxin Zhai, Jiapeng Jiao, Mengke Dong, Cheng Xue, Ting Deng, Zhanghui Xia, Mingjie Cheng, Chunjun Chen, et al.

    Electrocatalytic carbon dioxide reduction reaction (CO 2 RR) is an attractive and green technology that can convert renewable electricity into high‐energy‐density fuel, which is of great significance for alleviating the dual pressures of energy and environmental concern. Although the electrosynthesis of some C 2 products (e.g., ethylene, acetate, and ethanol) has achieved certain success, the generation of glycolate is still beyond the scope of existing electrocatalytic technologies. Here, we report the electrochemical reaction of direct conversion of CO 2 to glycolate in aqueous media under ambient conditions using unsaturated Cu sites as the catalyst, with a production rate of glycolate up to 305 ± 24 mmol h −1 g −1 . Further mechanism studies have shown that the key to glycolate generation is the formation and timely desorption of the *OHCCHO intermediate after C–C coupling, followed by a disproportionation reaction with base to generate the product. This work provides a successful case for the sustainable synthesis of glycolic acid from CO 2 in aqueous media, which represents a new product from electrocatalytic CO 2 RR.

  • Electrosynthesis of Biodegradable Plastic Monomer Dimethyl Furan-2,5-Dicarboxylate from Inedible Hemicellulose Derivatives and CO 2

    by Mengke Dong, Shuaiqiang Jia, Xiao Chen, Jiapeng Jiao, Cheng Xue, Zhanghui Xia, Ting Deng, Hailian Cheng, Chunjun Chen, Kaiwu Dong, et al.

    Inedible hemicellulose-derived furfural (FF) and its derivatives offer an attractive way for the sustainable production of dimethyl furan-2,5-dicarboxylate (Me2-2,5-FDCA), a monomer of the biodegradable poly(ethylene-2,5-furandicarboxylate) (PEF) plastic. Traditional synthesis methods of Me2-2,5-FDCA involve nucleophilic species from furan derivatives, activated by thermal catalysis, undergoing C-C coupling by nucleophilic attack processes, which exhibit harsh reaction conditions, poor atom economy, and low selectivity. Herein, we reported the electrosynthesis of 5-(methoxycarbonyl)furan-2-carboxylic acid (Me-2,5-FDCA) from methyl furoate (Me-FA) and carbon dioxide (CO2), achieving 80% yield, 93% selectivity, and 6.4% Faraday efficiency (FE). Through subsequent acidification and esterification processes, gram-scale Me2-2,5-FDCA was easily obtained from the electrolytic product. Mechanism studies indicated that CO2, rather than furan derivatives, was first activated by the electric energy to form a CO2 radical anion (CO2•-) and then the CO2•- performed C-C coupling with Me-FA by radical addition processes, which was responsible for the high C5 site selectivity. This innovative electrosynthesis route to the monomer of PEF simultaneously features mild reaction conditions and an excellent atomic economy, which has great potential for application and promotes the transition from petroleum-based plastics to biomass-based plastics.

  • Ambient One‐Pot Electrocatalytic Synthesis of Caprolactam From Cyclohexanone and Nitrate Over Ag‐Ag 4 Sn‐SnO 2 Nanoparticles

    by Cheng Xue, Shuaiqiang Jia, Xiao Chen, Jiapeng Jiao, Zhanghui Xia, Mengke Dong, Ting Deng, Hailian Cheng, Chunjun Chen, Haihong Wu, et al.

    Caprolactam (CPL), a monomer of nylon‐6 widely used in automotive, machinery, and electronics, is traditionally synthesized from cyclohexanone (CYC) through a complex process that generates low‐value ammonium sulfate, leading to environmental pollution. In contrast, electrochemical methods offer a safer, greener one‐pot synthesis of CPL from waste NO 3 – , but currently, the coupling of CYC and NO 3 – primarily produces cyclohexanone oxime (CHO), and the direct generation of CPL is challenging. Here, we report for the first time the electrochemical conversion of CYC and NO 3 – to high‐value CPL in a one‐pot process under ambient conditions. Using Ag‐Ag 4 Sn‐SnO 2 nanoparticle catalysts, we achieved a remarkable 96% yield and 97% selectivity for CPL electrosynthesis. In situ characterizations, control experiments, and theoretical calculations suggested the importance of balanced activation of NO 3 – and CYC substrates on the Ag‐Ag 4 Sn‐SnO 2 catalysts for achieving high‐efficient CPL electrosynthesis. The method also exhibits broad versatility in synthesizing various amide compounds, including paracetamol for antipyretic. Notably, scaling up the reactor enabled a high CPL production rate of 3.41 g h −1 g cat −1 with a 90.5% isolated yield, highlighting the potential of this technique for large‐scale electrosynthesis.