Guofeng Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guofeng Sun has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Chong Liu
Institute of Civil Engineering and Architecture, Ural Federal University, Yekaterinburg 620062, Russia
1 shared publication - Людмила Ивановна Миронова
Уральский федеральный университет
1 shared publication
Latest Publications
- Open Access
- 15 April 2026
- Published by Elsevier in SSRN Electronic Journal
Design of Steel Moment-Resisting Frames Considering Joint Rotation under Cyclic Loading
This paper optimizes the stiffness matrix of steel frames with end-plate connections by considering the stiffness of the connection joints, and proposes a calculation method for the joint rotation of steel frames that accounts for the linear stiffness of the beam and the lateral stiffness of the column. The design criteria for the flexural capacity and rotational stiffness of end-plate connections are summarized based on the component method in Eurocode. A calculation method for the plastic capacity and stiffness of connections and beams is proposed based on the Continuous Strength Method (CSM). The stiffness matrix of the steel frame is optimized, and formulas for calculating the frame displacement and rotation considering the stiffness of the end-plate connection are established. The effectiveness of the proposed design procedure is validated through parametric finite element (FE) simulations, which are based on a model verified by experimental tests on a spatial steel frame with extended end-plate connections. The research findings include: a method for calculating the stiffness of beam-column joints considering joint rotation; the influence of the strength of each component on the failure mechanism; and recommendations for joint design under cyclic loading. Using the developed method, the load-bearing capacity and stiffness of the joint can be accurately estimated, and the moment-rotation relationship curve can be generated. The proposed calculation method is easy to apply and has been validated through finite element studies, yielding accurate results.
- 15 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDesign of Steel Moment-Resisting Frames Considering Joint Rotation under Cyclic Loading
This paper optimizes the stiffness matrix of steel frames with end-plate connections by considering the stiffness of the connection joints, and proposes a calculation method for the joint rotation of steel frames that accounts for the linear stiffness of the beam and the lateral stiffness of the column. The design criteria for the flexural capacity and rotational stiffness of end-plate connections are summarized based on the component method in Eurocode. A calculation method for the plastic capacity and stiffness of connections and beams is proposed based on the Continuous Strength Method (CSM). The stiffness matrix of the steel frame is optimized, and formulas for calculating the frame displacement and rotation considering the stiffness of the end-plate connection are established. The effectiveness of the proposed design procedure is validated through parametric finite element (FE) simulations, which are based on a model verified by experimental tests on a spatial steel frame with extended end-plate connections. The research findings include: a method for calculating the stiffness of beam-column joints considering joint rotation; the influence of the strength of each component on the failure mechanism; and recommendations for joint design under cyclic loading. Using the developed method, the load-bearing capacity and stiffness of the joint can be accurately estimated, and the moment-rotation relationship curve can be generated. The proposed calculation method is easy to apply and has been validated through finite element studies, yielding accurate results.
- Open Access
- 3 April 2026
- Published by Peoples' Friendship University of Russia in Structural Mechanics of Engineering Constructions and Buildings
- Vol. 21 (6)
Influence of Rotational Stiffness of Beam-to-Column Connection on Steel Frame Performance
The object of this study is a bolted end-plate connection, which is considered as a semi-rigid connection based on the concept of steel connections corresponding to Eurocode 3. The aim of this work is to develop a method for calculating a steel frame with bolted end-plate connection and to identify the effect of joint displacement on the behavior of the entire frame. Method. The behavior of a steel frame with bolted flange connections is analyzed, in which the connection can partially rotate. In this case, the stiffness matrix can be used for the elastic-plastic analysis of a frame with semi-rigid connections. Optimization of the stiffness matrix is carried out taking into account the stiffness of the beam-column connection. A method for calculating the rotation angle of the beam-column joint is developed, taking into account the linear stiffness of the beam and the transverse stiffness of the column. Methods for calculating the bending stiffness of bolted flange connections of rotation, based on the component method from Eurocode 3, are summarized. The accuracy and effectiveness of the developed methodology were verified, and the results demonstrate a sufficiently high level of accuracy in the experiments. The results of the study include a frame design method that takes into account joint rotation and the influence of bending stiffness on the overall frame performance. Based on the results, it can be concluded that the developed methodology enables accurate prediction of the performance of steel frames with flanged connections, and that the optimal option for the tested steel frame is the use of flanged connections with a flange thickness of 16.4 mm.
- 3 April 2026
- Published by Peoples' Friendship University of Russia in Structural Mechanics of Engineering Constructions and Buildings
- Vol. 21 (6)
Open AccessInfluence of Rotational Stiffness of Beam-to-Column Connection on Steel Frame Performance
The object of this study is a bolted end-plate connection, which is considered as a semi-rigid connection based on the concept of steel connections corresponding to Eurocode 3. The aim of this work is to develop a method for calculating a steel frame with bolted end-plate connection and to identify the effect of joint displacement on the behavior of the entire frame. Method. The behavior of a steel frame with bolted flange connections is analyzed, in which the connection can partially rotate. In this case, the stiffness matrix can be used for the elastic-plastic analysis of a frame with semi-rigid connections. Optimization of the stiffness matrix is carried out taking into account the stiffness of the beam-column connection. A method for calculating the rotation angle of the beam-column joint is developed, taking into account the linear stiffness of the beam and the transverse stiffness of the column. Methods for calculating the bending stiffness of bolted flange connections of rotation, based on the component method from Eurocode 3, are summarized. The accuracy and effectiveness of the developed methodology were verified, and the results demonstrate a sufficiently high level of accuracy in the experiments. The results of the study include a frame design method that takes into account joint rotation and the influence of bending stiffness on the overall frame performance. Based on the results, it can be concluded that the developed methodology enables accurate prediction of the performance of steel frames with flanged connections, and that the optimal option for the tested steel frame is the use of flanged connections with a flange thickness of 16.4 mm.
- Open Access
- 7 March 2026
- Published by Elsevier in SSRN Electronic Journal
Design of End-Plate Connections under Cyclic Loading Using the Continuous Strength Method
Bolted extended end-plate connections are widely used in beam-to-column and beam-to-beam joints, where they are primarily subjected to bending moments. This paper investigates bolted extended end-plate connections and provides a comprehensive characterization of their nonlinear behavior. An equivalent mechanical model is proposed for this type of connection, which is applicable to strong-axis beam-to-column joints with open I-section columns. Based on the Continuous Strength Method (CSM) combined with the component method, a design approach is developed to evaluate the flexural stiffness and strength of bolted extended end-plate connections subjected to both monotonic and cyclic loading. The proposed method accounts for the strength mismatch between the end plate and high-strength bolts, which may result in three distinct failure mechanisms, as well as geometric and material nonlinearities. The outcomes of this study include: a method for calculating the stiffness of beam-to-column joints with extended end-plate connections; an assessment of the influence of the strength of individual joint components on the governing failure mechanism; and design recommendations for joints subjected to cyclic loading. Using the developed approach, the load-carrying capacity and rotational stiffness of the joints can be accurately predicted, and the corresponding moment–rotation relationships can be generated. The proposed calculation method is straightforward to apply and has been validated through finite element studies, demonstrating its ability to provide accurate predictions.
- 7 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDesign of End-Plate Connections under Cyclic Loading Using the Continuous Strength Method
Bolted extended end-plate connections are widely used in beam-to-column and beam-to-beam joints, where they are primarily subjected to bending moments. This paper investigates bolted extended end-plate connections and provides a comprehensive characterization of their nonlinear behavior. An equivalent mechanical model is proposed for this type of connection, which is applicable to strong-axis beam-to-column joints with open I-section columns. Based on the Continuous Strength Method (CSM) combined with the component method, a design approach is developed to evaluate the flexural stiffness and strength of bolted extended end-plate connections subjected to both monotonic and cyclic loading. The proposed method accounts for the strength mismatch between the end plate and high-strength bolts, which may result in three distinct failure mechanisms, as well as geometric and material nonlinearities. The outcomes of this study include: a method for calculating the stiffness of beam-to-column joints with extended end-plate connections; an assessment of the influence of the strength of individual joint components on the governing failure mechanism; and design recommendations for joints subjected to cyclic loading. Using the developed approach, the load-carrying capacity and rotational stiffness of the joints can be accurately predicted, and the corresponding moment–rotation relationships can be generated. The proposed calculation method is straightforward to apply and has been validated through finite element studies, demonstrating its ability to provide accurate predictions.