QHQinshi Hu

Qinshi Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qinshi Hu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Aging Evolution and Performance Correlations of Base and Rubberized Asphalt Binders Based on 2S2P1D Viscoelastic Parameters

    by Xin Yang, Xiang Yu, Zikai Xu, Jiupeng Zhang, Xiaojie Yang, Xiaokang Zhao, Chenyi Wang

    Aging has a significant influence on the rheological behavior and service performance of asphalt binders. In this study, base asphalt binder (BAB) and rubberized asphalt binder (RAB) with different aging levels were investigated to clarify their aging evolution and performance correlations. Rheological tests were conducted to evaluate high-temperature rutting resistance, intermediate-temperature fatigue performance, and low-temperature cracking resistance. The 2S2P1D viscoelastic model was used to analyze the evolution of viscoelastic parameters, while gel permeation chromatography (GPC) was adopted to characterize molecular weight changes during aging. The results showed that aging increased the rutting resistance of both binders, but reduced fatigue performance and low-temperature cracking resistance. Among the 2S2P1D viscoelastic model parameters, G∞, δ, and β were more sensitive to aging than the other parameters and exhibited relatively clear variation trends. Selected viscoelastic parameters also showed significant correlations with rheological performance indices. GPC results indicated that both binder systems progressively evolved toward higher molecular weight during aging, with the molecular weight distribution curves shifting toward the high-molecular-weight region. For RAB, Mw was more sensitive to aging than Mn and showed some fluctuation at intermediate aging stages, reflecting a more complex molecular evolution. Overall, the results indicate that selected 2S2P1D viscoelastic parameters can serve as sensitive indicators of aging evolution and provide a useful basis for interpreting the performance correlations and rheological changes of asphalt binders from a viscoelastic perspective.

  • Open Access

    Optimization of UHPC Mix Design Using Polyacrylonitrile Fibers and Coarse Aggregates for Cost Reduction

    by Qinshi Hu, Changli Su, Jiupeng Zhang, Xiaokang Zhao

    To reduce the production cost of ultra-high performance concrete (UHPC), this study incorporated polyacrylonitrile (PAN) fibers and coarse aggregates (CA) to develop a novel UHPC with both excellent performance and reduced cost. A two-stage mortar-concrete design approach was employed to optimize the UHPC mix proportion. First, the mortar matrix was preliminarily optimized based on particle packing theory, and its strength development mechanism was analyzed. Subsequently, response surface methodology was applied to systematically investigate the effects of PAN fiber content, CA content, and superplasticizer (SP) dosage on the slump flow, compressive strength, flexural strength, indirect tensile strength, freeze–thaw resistance, and dynamic mechanical properties of UHPC. The entropy weight method was then adopted to determine the optimal mix proportion, followed by cost estimation. The results indicate that the optimal mortar matrix composition consists of 61.4% cement, 15% silica fume, and 23.6% fly ash, achieving a flow spread of 246 mm, a compressive strength of 117.2 MPa, and a flexural strength of 24.9 MPa. When the PAN fiber content, CA content, and SP dosage were 0.5%, 20%, and 3.8%, respectively, the prepared PAN-CA UHPC(PCUHPC) exhibited the best overall performance. Compared with conventional UHPC, the material cost was reduced by 81.7%, and the compressive strength-normalized cost decreased by 75.4%. The UHPC developed in this study, characterized by outstanding performance and significant cost advantages, provides a feasible solution and theoretical support for broader engineering applications.