JZJingpeng Zhou

Jingpeng Zhou

*This is an algorithmically generated author record based on publicly available information.

Jingpeng Zhou has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synergistic Enhancement of Phenolic Hydroxyl Content in Lignin via Sequential Hydrothermal and Twin-Screw Extrusion Pretreatment Followed by Aqueous Ethanol Organosolv Extraction

    by Fangmin Liang, Ting Jiao, Jian Jiao, Chen Huang, Yan Lv, Yongjun Deng, Qingwen Tian, Ting Wu, Beiping Zhu, Shanming Han, et al.

    Lignin, the second most abundant polymer, remains largely underutilized, with nearly 90% of industrial lignin being combusted for energy due to its low phenolic hydroxyl content and structural heterogeneity of conventional extraction methods. The present study proposes a synergistic extraction method integrating sequential hydrothermal and twin-screw extrusion pretreatment followed by aqueous ethanol organosolv extraction. Three pretreatment strategies—hydrothermal pretreatment, twin-screw extrusion pretreatment, and sequential hydrothermal and twin-screw extrusion pretreatment—were compared. The sequential pretreatment exhibited the most favorable performance. Upon organosolv extraction, a lignin extraction rate of 67.9% was achieved, representing a 20.8% increase over that of the raw material. Extensive β-O-4′ bond cleavage during the integrated process liberated phenolic hydroxyl groups. This elevated the total phenolic hydroxyl content to 3.43 mmol·g−1, representing a 63.3% increase relative to lignin derived from raw material. Concurrently, this bond cleavage yielded lignin with a narrower molecular weight distribution, indicating enhanced structural homogeneity. Additionally, cellulose retention after lignin extraction reached 88.9%. Mass-balance calculations indicated that 1000 g of raw material yielded 82.5 g of xylose and xylooligosaccharides, 148.2 g of highly active lignin, and cellulose-enriched solid residues, thereby facilitating the comprehensive utilization of the three primary components of lignocellulosic biomass.


  • Open Access

    Combining Phenolization Treatment with the Mannich Reaction for Modification of Kraft Lignin to Produce Highly Efficient Lignin-Based Nitrogen Fertilizer

    by Xinkai Mo, Yingchao Wang, Zhongjian Tian, Xingxiang Ji, Fengshan Zhang, Jingpeng Zhou

    In this study, the amination-based modification of kraft lignin (KL) was implemented through phenolization treatment combined with the Mannich reaction to synthesize the aminated lignin (APKL) with high nitrogen content. Afterward, the chemical structural changes and reaction mechanism of KL during the modification process were surveyed in depth using diverse analytical techniques. The results revealed that the phenolization treatment markedly raised the active site number in KL from 5.79 to 25.5 mmol/g, which led to a significant increase in the chemical reactivity of KL. Meanwhile, the amine group was successfully grafted onto the best phenolized kraft lignin (PKL) after the Mannich reaction. Furthermore, the effects of amination reagent, reactant mass ratio, temperature and time on the nitrogen content of APKL were systematically examined to optimize the reaction conditions for amination. Using FTIR, molecular weight and elemental analyses, the optimal amination conditions were determined as a reaction temperature of 75 °C, reaction time of 3 h and PKL6/arginine/formaldehyde mass ratio of 3:21:28. Under these parameters, APKL10 with a higher nitrogen content of 19.2% and lower C/N ratio of 2.46 was acquired. In addition, TG and SEM results revealed that the obtained APKL10 possessed a flake-like structure and outstanding thermal stability, which was beneficial for its subsequent application as a slow-release soil fertilizer. More importantly, the soil column leaching test confirmed that the as-prepared APKL10 had excellent nitrogen slow-release properties in the soil. As a result, this kraft lignin derivative generated by phenol treatment followed by amination-based modification could serve as an efficient nitrogen fertilizer, providing a long-term nitrogen source for plant growth in soil.

  • Open Access

    Optimization of Bleaching Process and Evaluation of Pulp Performance for Super-Arundo Donax Kraft Pulp

    by Zhangming Cai, Xingxiang Ji, Jie Liang, Zhongjian Tian, Jingpeng Zhou

    With the increasing emphasis and protection on forest resources worldwide, the development of non-wood plant fiber raw materials has become a key path to promote the green and sustainable development of China’s pulp and paper industry. In this study, Super-Arundo donax, a new non-wood fiber raw material, was systematically investigated for its applicability in the bleaching process. Firstly, by adjusting key bleaching technical variables such as alkali dosage, time, oxygen pressure and temperature, the oxygen delignification process of the Super-Arundo donax kraft pulp was optimized. The data revealed that under the experimental conditions of 3.0% alkali dosage, 60 min bleaching time, 100 °C bleaching temperature, 0.6 MPa oxygen pressure and 0.6% MgSO4 dosage, the bleached pulp yield reached 91.58%, the brightness was 42.04% ISO, and its tensile index was 60.92 N·m/g, bursting index was 4.16 kPa·m2/g, and tear index was 5.45 mN·m2/g, respectively. To further enhance the bleaching effect, the study introduced the H2O2 enhanced oxygen delignification process. The alkali dosage, bleaching temperature and H2O2 dosage were selected as the process parameters, with the pulp yield and brightness as the response indicators. A central composite design was adopted to construct a response surface model, and the interaction effects among various factors were analyzed. The optimized optimal process conditions are as follows: pulp concentration 10%, alkali dosage 2.84%, bleaching temperature 105 °C, H2O2 dosage 4.85%, bleaching time 60 min, MgSO4 dosage 0.6%. Under these conditions, the pulp yield was 89.76% and the brightness reached 53.85% ISO. Therefore, Super-Arundo donax possesses excellent pulp-making and papermaking properties, and is expected to serve as a high-quality non-wood fiber raw material to alleviate the pressure on traditional papermaking raw materials and contribute to the green, sustainable and low-carbon transformation of the pulp and paper industry.