Sachin Kumar
Research Subjects
Sachin Kumar has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Indrajit Sinha
Department of Chemistry, Indian Institute of Technology (Banaras Hindu University), Varanasi 221005, India
3 shared publications - Maheswari Yadav3 shared publications
- Seon Yong Ji3 shared publications
- Shanmugam Manivannan
Electrochemistry Laboratory for Sensors & Energy (ELSE) Department of Chemistry Incheon National University Incheon 22012 Republic of Korea
3 shared publications - Ramasamy Ramaraj
Madurai Kamaraj University
2 shared publications Kyuwon Kim
1 shared publication
Latest Publications
- Open Access
- 13 October 2026
- Published by Elsevier in SSRN Electronic Journal
Nanoporous Ag-Modified CuO Electrocatalyst via Surfactant-Directed Synthesis for Efficient and Selective Oxygen Reduction in Alkaline Media
The development of cost-effective and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is critical for advancing alkaline fuel cells and metal–air batteries. Herein, we report a surfactant-directed synthesis strategy to construct nanoporous Ag-modified CuO electrocatalysts via the controlled thermal decomposition of Ag-containing copper oxalate precursors in the presence of cetyltrimethylammonium bromide (CTAB). The resulting Cu–Ag–CTAB oxide exhibits a well-defined porous architecture with uniformly dispersed Ag species, providing abundant accessible active sites and enhanced charge transfer pathways. Electrochemical measurements in O₂-saturated 0.1 M KOH reveal that the optimized catalyst delivers a positive onset potential of ~0.87 V vs. RHE, a half-wave potential of ~0.67 V, and a low Tafel slope of ~76.2 mV dec⁻¹, approaching the performance of commercial Pt/C. Rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) analyses confirm a dominant four-electron ORR pathway (n ≈ 4.0–4.1) with low peroxide yield (90% of its current density under continuous operation. The enhanced ORR performance is attributed to the synergistic effect of Ag incorporation and CTAB-induced nano porosity, which collectively modulate the electronic structure of CuO, facilitate O₂ adsorption, and promote efficient activation of key intermediates. Density functional theory (DFT) calculations further reveal that Ag-modified CuO surfaces significantly weaken the O–O bond in OOH intermediates, favoring the four-electron reduction pathway. This work provides a scalable and effective strategy for designing high-performance Cu-based electrocatalysts and offers valuable insights into the structure–activity relationship governing alkaline ORR.
- 13 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNanoporous Ag-Modified CuO Electrocatalyst via Surfactant-Directed Synthesis for Efficient and Selective Oxygen Reduction in Alkaline Media
The development of cost-effective and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is critical for advancing alkaline fuel cells and metal–air batteries. Herein, we report a surfactant-directed synthesis strategy to construct nanoporous Ag-modified CuO electrocatalysts via the controlled thermal decomposition of Ag-containing copper oxalate precursors in the presence of cetyltrimethylammonium bromide (CTAB). The resulting Cu–Ag–CTAB oxide exhibits a well-defined porous architecture with uniformly dispersed Ag species, providing abundant accessible active sites and enhanced charge transfer pathways. Electrochemical measurements in O₂-saturated 0.1 M KOH reveal that the optimized catalyst delivers a positive onset potential of ~0.87 V vs. RHE, a half-wave potential of ~0.67 V, and a low Tafel slope of ~76.2 mV dec⁻¹, approaching the performance of commercial Pt/C. Rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) analyses confirm a dominant four-electron ORR pathway (n ≈ 4.0–4.1) with low peroxide yield (90% of its current density under continuous operation. The enhanced ORR performance is attributed to the synergistic effect of Ag incorporation and CTAB-induced nano porosity, which collectively modulate the electronic structure of CuO, facilitate O₂ adsorption, and promote efficient activation of key intermediates. Density functional theory (DFT) calculations further reveal that Ag-modified CuO surfaces significantly weaken the O–O bond in OOH intermediates, favoring the four-electron reduction pathway. This work provides a scalable and effective strategy for designing high-performance Cu-based electrocatalysts and offers valuable insights into the structure–activity relationship governing alkaline ORR.
- Open Access
- 22 August 2026
- Published by Elsevier in SSRN Electronic Journal
Nanoporous Ag-Modified CuO Electrocatalyst via Surfactant-Directed Synthesis for Efficient and Selective Oxygen Reduction in Alkaline Media
The development of cost-effective and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is critical for advancing alkaline fuel cells and metal–air batteries. Herein, we report a surfactant-directed synthesis strategy to construct nanoporous Ag-modified CuO electrocatalysts via the controlled thermal decomposition of Ag-containing copper oxalate precursors in the presence of cetyltrimethylammonium bromide (CTAB). The resulting Cu–Ag–CTAB oxide exhibits a well-defined porous architecture with uniformly dispersed Ag species, providing abundant accessible active sites and enhanced charge transfer pathways. Electrochemical measurements in O₂-saturated 0.1 M KOH reveal that the optimized catalyst delivers a positive onset potential of ~0.87 V vs. RHE, a half-wave potential of ~0.67 V, and a low Tafel slope of ~76.2 mV dec⁻¹, approaching the performance of commercial Pt/C. Rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) analyses confirm a dominant four-electron ORR pathway (n ≈ 4.0–4.1) with low peroxide yield (90% of its current density under continuous operation. The enhanced ORR performance is attributed to the synergistic effect of Ag incorporation and CTAB-induced nano porosity, which collectively modulate the electronic structure of CuO, facilitate O₂ adsorption, and promote efficient activation of key intermediates. Density functional theory (DFT) calculations further reveal that Ag-modified CuO surfaces significantly weaken the O–O bond in OOH intermediates, favoring the four-electron reduction pathway. This work provides a scalable and effective strategy for designing high-performance Cu-based electrocatalysts for governing alkaline ORR.
- 22 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNanoporous Ag-Modified CuO Electrocatalyst via Surfactant-Directed Synthesis for Efficient and Selective Oxygen Reduction in Alkaline Media
The development of cost-effective and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is critical for advancing alkaline fuel cells and metal–air batteries. Herein, we report a surfactant-directed synthesis strategy to construct nanoporous Ag-modified CuO electrocatalysts via the controlled thermal decomposition of Ag-containing copper oxalate precursors in the presence of cetyltrimethylammonium bromide (CTAB). The resulting Cu–Ag–CTAB oxide exhibits a well-defined porous architecture with uniformly dispersed Ag species, providing abundant accessible active sites and enhanced charge transfer pathways. Electrochemical measurements in O₂-saturated 0.1 M KOH reveal that the optimized catalyst delivers a positive onset potential of ~0.87 V vs. RHE, a half-wave potential of ~0.67 V, and a low Tafel slope of ~76.2 mV dec⁻¹, approaching the performance of commercial Pt/C. Rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) analyses confirm a dominant four-electron ORR pathway (n ≈ 4.0–4.1) with low peroxide yield (90% of its current density under continuous operation. The enhanced ORR performance is attributed to the synergistic effect of Ag incorporation and CTAB-induced nano porosity, which collectively modulate the electronic structure of CuO, facilitate O₂ adsorption, and promote efficient activation of key intermediates. Density functional theory (DFT) calculations further reveal that Ag-modified CuO surfaces significantly weaken the O–O bond in OOH intermediates, favoring the four-electron reduction pathway. This work provides a scalable and effective strategy for designing high-performance Cu-based electrocatalysts for governing alkaline ORR.
- Open Access
- 18 May 2026
- Published by Elsevier in SSRN Electronic Journal
Nanoporous Ag-Modified CuO Electrocatalyst via Surfactant-Directed Synthesis for Efficient and Selective Oxygen Reduction in Alkaline Media
The development of cost-effective and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is critical for advancing alkaline fuel cells and metal–air batteries. Herein, we report a surfactant-directed synthesis strategy to construct nanoporous Ag-modified CuO electrocatalysts via the controlled thermal decomposition of Ag-containing copper oxalate precursors in the presence of cetyltrimethylammonium bromide (CTAB). The resulting Cu–Ag–CTAB oxide exhibits a well-defined porous architecture with uniformly dispersed Ag species, providing abundant accessible active sites and enhanced charge transfer pathways. Electrochemical measurements in O₂-saturated 0.1 M KOH reveal that the optimized catalyst delivers a positive onset potential of ~0.87 V vs. RHE, a half-wave potential of ~0.67 V, and a low Tafel slope of ~76.2 mV dec⁻¹, approaching the performance of commercial Pt/C. Rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) analyses confirm a dominant four-electron ORR pathway (n ≈ 4.0–4.1) with low peroxide yield (90% of its current density under continuous operation. The enhanced ORR performance is attributed to the synergistic effect of Ag incorporation and CTAB-induced nano porosity, which collectively modulate the electronic structure of CuO, facilitate O₂ adsorption, and promote efficient activation of key intermediates. Density functional theory (DFT) calculations further reveal that Ag-modified CuO surfaces significantly weaken the O–O bond in OOH intermediates, favoring the four-electron reduction pathway. This work provides a scalable and effective strategy for designing high-performance Cu-based electrocatalysts and offers valuable insights into the structure–activity relationship governing alkaline ORR.
- 18 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessNanoporous Ag-Modified CuO Electrocatalyst via Surfactant-Directed Synthesis for Efficient and Selective Oxygen Reduction in Alkaline Media
The development of cost-effective and durable non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is critical for advancing alkaline fuel cells and metal–air batteries. Herein, we report a surfactant-directed synthesis strategy to construct nanoporous Ag-modified CuO electrocatalysts via the controlled thermal decomposition of Ag-containing copper oxalate precursors in the presence of cetyltrimethylammonium bromide (CTAB). The resulting Cu–Ag–CTAB oxide exhibits a well-defined porous architecture with uniformly dispersed Ag species, providing abundant accessible active sites and enhanced charge transfer pathways. Electrochemical measurements in O₂-saturated 0.1 M KOH reveal that the optimized catalyst delivers a positive onset potential of ~0.87 V vs. RHE, a half-wave potential of ~0.67 V, and a low Tafel slope of ~76.2 mV dec⁻¹, approaching the performance of commercial Pt/C. Rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) analyses confirm a dominant four-electron ORR pathway (n ≈ 4.0–4.1) with low peroxide yield (90% of its current density under continuous operation. The enhanced ORR performance is attributed to the synergistic effect of Ag incorporation and CTAB-induced nano porosity, which collectively modulate the electronic structure of CuO, facilitate O₂ adsorption, and promote efficient activation of key intermediates. Density functional theory (DFT) calculations further reveal that Ag-modified CuO surfaces significantly weaken the O–O bond in OOH intermediates, favoring the four-electron reduction pathway. This work provides a scalable and effective strategy for designing high-performance Cu-based electrocatalysts and offers valuable insights into the structure–activity relationship governing alkaline ORR.