Laura Hernández-Martín
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Laura Hernández-Martín has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Hugo Fidalgo Martins
Instituto de ptica Daza de Valds IO-CSIC, Madrid, Spain
4 shared publications - Juan Diego Ania-Castañón
CSIC
3 shared publications - Giuseppe Rizzelli
Politecnico di Torino
2 shared publications - Roberto Gaudino
Politecnico di Torino
2 shared publications - Saverio Pellegrini
Politecnico di Torino
2 shared publications - Alejandro Rosado
Universidad Politcnica de Madrid, Madrid, Spain
1 shared publication
Latest Publications
- Open Access
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 18 (5) , 0601609
Experimental Study on Chirped-Pulse DAS Coexistence With DWDM High-Speed Coherent Communication Systems in C + L Bands
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 18 (5) , 0601609
Open AccessExperimental Study on Chirped-Pulse DAS Coexistence With DWDM High-Speed Coherent Communication Systems in C + L Bands
- Open Access
- 26 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-8
MFDD-CP-$\phi$OTDR Self-Correction for Fiber Calibration in Dynamic Enviroments
Multi-Frequency Database Demodulation (MFDD) combined with chirped-pulse (CP) phase-sensitive OTDR ($\phi$-OTDR) has recently emerged as a promising technique for distributed acoustic sensing (DAS), offering high long-term stability by mitigating $1/f$ noise without compromising sensitivity, and increasing acoustic bandwidth and dynamic range. However, a critical limitation has been the requirement for the fiber to remain unperturbed during the acquisition of the reference matrix, restricting practical deployment in environments with unavoidable ambient vibrations or temperature changes. In this work, we introduce and experimentally validate a self-correcting MFDD method that enables accurate reference matrix calibration under perturbations by treating the MFDD reference acquisition itself as a CP-$\phi$-OTDR measurement. This approach allows perturbations occurring during calibration to be measured and compensated in post-processing, preserving the system's accuracy and stability. We demonstrate the method across three scenarios: (i) a baseline measurement with calibration under quiet conditions, (ii) calibration with intentionally applied perturbations later corrected in post-processing, and (iii) a long-term measurement over 35 hours to assess extended stability. The results show that the self-corrected MFDD approach maintains comparable performance in both fast (100 Hz) dynamic and quas-static measurements. This advancement significantly enhances the robustness of MFDD-CP-$\phi$-OTDR systems, facilitating reliable long-term distributed sensing in practical environments for applications in geophysical monitoring, structural health assessment, and infrastructure surveillance.
- 26 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. PP (07338724) , 1-8
Open AccessMFDD-CP-$\phi$OTDR Self-Correction for Fiber Calibration in Dynamic Enviroments
Multi-Frequency Database Demodulation (MFDD) combined with chirped-pulse (CP) phase-sensitive OTDR ($\phi$-OTDR) has recently emerged as a promising technique for distributed acoustic sensing (DAS), offering high long-term stability by mitigating $1/f$ noise without compromising sensitivity, and increasing acoustic bandwidth and dynamic range. However, a critical limitation has been the requirement for the fiber to remain unperturbed during the acquisition of the reference matrix, restricting practical deployment in environments with unavoidable ambient vibrations or temperature changes. In this work, we introduce and experimentally validate a self-correcting MFDD method that enables accurate reference matrix calibration under perturbations by treating the MFDD reference acquisition itself as a CP-$\phi$-OTDR measurement. This approach allows perturbations occurring during calibration to be measured and compensated in post-processing, preserving the system's accuracy and stability. We demonstrate the method across three scenarios: (i) a baseline measurement with calibration under quiet conditions, (ii) calibration with intentionally applied perturbations later corrected in post-processing, and (iii) a long-term measurement over 35 hours to assess extended stability. The results show that the self-corrected MFDD approach maintains comparable performance in both fast (100 Hz) dynamic and quas-static measurements. This advancement significantly enhances the robustness of MFDD-CP-$\phi$-OTDR systems, facilitating reliable long-term distributed sensing in practical environments for applications in geophysical monitoring, structural health assessment, and infrastructure surveillance.
- Open Access
- 16 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1743-1753
Experimental and Simulative Study on IM-DD Transmission and Large Chirped-Pulse DAS Coexistence
Distributed acoustic sensing (DAS), implemented through phase-sensitive optical time-domain reflectometry ($\phi$OTDR), has gained attention in geophysical and telecommunications environments. By utilizing the existing telecom infrastructure, DAS facilitates self-monitoring of networks and external events observation, from human activities to large-scale geophysical phenomena. However, integrating it with data signals on the same fiber is challenging, as DAS employs higher power signals that can interact with data channels. Although increasing DAS performance with higher bandwidths is possible, practical applications have mostly been limited to 1 GHz due to cost and complexity constraints. This paper investigates the coexistence conditions of DAS, specifically direct detection (DD) chirped-pulse-$\phi$OTDR (CP-$\phi$OTDR), with intensity-modulated and DD (IM-DD) telecommunication systems, both operating at comparable complexities (5 GHz chirp and 10 Gbit/s), particularly interesting for metro/access contexts. We varied the frequency spacing of data and DAS channels, the DAS pulse peak power, and the receiver optical filter bandwidth, identifying the conditions for feasible coexistence. Our analysis shows that nonlinear Kerr-induced modulation instability (MI) is the main impairment affecting IM-DD channels co-propagating with DAS. In this scenario, MI cannot be approximated as originating from a single frequency source, and the observed nonlinear impairments vary along the pulse with its sweeping central frequency. Numerical simulations validate the experimental results, showing close alignment.
- 16 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (5) , 1743-1753
Open AccessExperimental and Simulative Study on IM-DD Transmission and Large Chirped-Pulse DAS Coexistence
Distributed acoustic sensing (DAS), implemented through phase-sensitive optical time-domain reflectometry ($\phi$OTDR), has gained attention in geophysical and telecommunications environments. By utilizing the existing telecom infrastructure, DAS facilitates self-monitoring of networks and external events observation, from human activities to large-scale geophysical phenomena. However, integrating it with data signals on the same fiber is challenging, as DAS employs higher power signals that can interact with data channels. Although increasing DAS performance with higher bandwidths is possible, practical applications have mostly been limited to 1 GHz due to cost and complexity constraints. This paper investigates the coexistence conditions of DAS, specifically direct detection (DD) chirped-pulse-$\phi$OTDR (CP-$\phi$OTDR), with intensity-modulated and DD (IM-DD) telecommunication systems, both operating at comparable complexities (5 GHz chirp and 10 Gbit/s), particularly interesting for metro/access contexts. We varied the frequency spacing of data and DAS channels, the DAS pulse peak power, and the receiver optical filter bandwidth, identifying the conditions for feasible coexistence. Our analysis shows that nonlinear Kerr-induced modulation instability (MI) is the main impairment affecting IM-DD channels co-propagating with DAS. In this scenario, MI cannot be approximated as originating from a single frequency source, and the observed nonlinear impairments vary along the pulse with its sweeping central frequency. Numerical simulations validate the experimental results, showing close alignment.
- Open Access
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (7) , 2722-2731
Large CP-ϕOTDR Assisted by Raman Amplification for Long-Range Millikelvin Fiber Thermometry
The use of CP-ϕOTDR with large (8 GHz) optical chirps is researched for long-range long-term distributed fiber millikelvin thermometry. Copropagating and bidirectional first order Raman distributed amplification is tested, demonstrating operation in up to 75km of SMF with 8 m spatial resolution. For varying input optical powers, the impact of nonlinear effects is analyzed. Using the increased measurand dynamic range and long-term fiber reference stability, the system is able to resume coherent temperature tracking, without discontinuities, after multiple hour-long measurement interruptions. A 10 Hz fiber sampling ensures compatibility of operation in dynamic environments. Instrumental error is placed at sub-MHz, (equivalent to sub-millikelvin errors for SMF), considering the tracking of daily variations of several degrees. As an application showcase, positions separated by ∼500 m (in fiber length), but placed in equivalent physical locations in a fiber spool, recorded similar weeklong temperature cycles, with only a few mK of average deviation between them (while intermediate fiber positions recorded deviations of 100's of mK), reinforcing the notion of long term millikelvin thermometry. Spatial symmetries associated with different fiber spools were readily mapped by tracking the distributed temperature variation patterns.
- 14 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 44 (7) , 2722-2731
Open AccessLarge CP-ϕOTDR Assisted by Raman Amplification for Long-Range Millikelvin Fiber Thermometry
The use of CP-ϕOTDR with large (8 GHz) optical chirps is researched for long-range long-term distributed fiber millikelvin thermometry. Copropagating and bidirectional first order Raman distributed amplification is tested, demonstrating operation in up to 75km of SMF with 8 m spatial resolution. For varying input optical powers, the impact of nonlinear effects is analyzed. Using the increased measurand dynamic range and long-term fiber reference stability, the system is able to resume coherent temperature tracking, without discontinuities, after multiple hour-long measurement interruptions. A 10 Hz fiber sampling ensures compatibility of operation in dynamic environments. Instrumental error is placed at sub-MHz, (equivalent to sub-millikelvin errors for SMF), considering the tracking of daily variations of several degrees. As an application showcase, positions separated by ∼500 m (in fiber length), but placed in equivalent physical locations in a fiber spool, recorded similar weeklong temperature cycles, with only a few mK of average deviation between them (while intermediate fiber positions recorded deviations of 100's of mK), reinforcing the notion of long term millikelvin thermometry. Spatial symmetries associated with different fiber spools were readily mapped by tracking the distributed temperature variation patterns.