Yule Wu
Research Subjects
Yule Wu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jiamei Wang
Hospital of Chengdu University of Traditional Chinese Medicine, Chengdu, China
6 shared publications Xianglong Guo
6 shared publicationsTianyu Zhu
5 shared publicationsKai Chen
4 shared publicationsLefu Zhang
4 shared publicationsJiamei Wang
2 shared publications
Latest Publications
- 29 September 2026
- Published by Elsevier in Corrosion Science
- Vol. 273
Accelerated corrosion fatigue crack propagation induced by δ phase in Alloy 718 exposed to high temperature water
- 29 September 2026
- Published by Elsevier in Corrosion Science
- Vol. 273
Accelerated corrosion fatigue crack propagation induced by δ phase in Alloy 718 exposed to high temperature water
- Open Access
- 25 September 2026
- Published by Elsevier in Energy & Environmental Sustainability
- Vol. 2 (3)
A crystal plasticity–electrochemical–cohesive zone framework for intergranular stress corrosion cracking in 316L stainless steel
- 25 September 2026
- Published by Elsevier in Energy & Environmental Sustainability
- Vol. 2 (3)
Open AccessA crystal plasticity–electrochemical–cohesive zone framework for intergranular stress corrosion cracking in 316L stainless steel
- 14 September 2026
- Published by Elsevier in Corrosion Science
- Vol. 272
Coupled crystal plasticity-electro-chemical modeling of intergranular crack initiation in stainless steel: Role of grain boundary characteristics
- 14 September 2026
- Published by Elsevier in Corrosion Science
- Vol. 272
Coupled crystal plasticity-electro-chemical modeling of intergranular crack initiation in stainless steel: Role of grain boundary characteristics
- Open Access
- 27 July 2026
- Published by Elsevier in SSRN Electronic Journal
Accelerated corrosion fatigue crack propagation induced by δ phase in Alloy 718 exposed to high temperature water
The corrosion fatigue crack growth behavior of Alloy 718 with two different δ phase contents was investigated in high temperature water. The results show that Alloy 718 containing δ phase exhibits high corrosion fatigue susceptibility, and the crack growth rate increases with increasing δ phase content under comparable loading conditions. A threshold frequency was identified for the crack propagation mode transition. Below this frequency, crack growth shifted from transgranular to intergranular cracking, indicating an increased contribution of environmental effect. The morphology, distribution, and orientation of δ precipitates relative to the crack path strongly affected crack advance, leading to either crack bypassing along the δ phase/matrix interface or direct fracture through δ precipitates. The synergistic effect of preferential corrosion along the δ phase/matrix interface and deformation induced strain localization is identified as the dominant mechanism responsible for the accelerated corrosion fatigue crack propagation.
- 27 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAccelerated corrosion fatigue crack propagation induced by δ phase in Alloy 718 exposed to high temperature water
The corrosion fatigue crack growth behavior of Alloy 718 with two different δ phase contents was investigated in high temperature water. The results show that Alloy 718 containing δ phase exhibits high corrosion fatigue susceptibility, and the crack growth rate increases with increasing δ phase content under comparable loading conditions. A threshold frequency was identified for the crack propagation mode transition. Below this frequency, crack growth shifted from transgranular to intergranular cracking, indicating an increased contribution of environmental effect. The morphology, distribution, and orientation of δ precipitates relative to the crack path strongly affected crack advance, leading to either crack bypassing along the δ phase/matrix interface or direct fracture through δ precipitates. The synergistic effect of preferential corrosion along the δ phase/matrix interface and deformation induced strain localization is identified as the dominant mechanism responsible for the accelerated corrosion fatigue crack propagation.
- Open Access
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Synergistic effects of nano-precipitates and cold work on the SCC growth behavior of Alloy 718
The stress corrosion cracking (SCC) propagation behavior of cold worked Alloy 718 subjected to different post-heat treatments was investigated in simulated pressurized water reactor (PWR) primary water. The results show that cold work significantly accelerated SCC propagation, with crack growth rates (CGRs) on the order of ~10-6 mm/s, whereas both post-heat treatments reduced the CGRs by nearly two orders of magnitude to ~10-8 mm/s. This behavior is mainly attributed to the partial relief of residual strain during heat treatment and the suppression of slip system by nano-precipitates, which alleviated the strain field of crack tips. Electrochemical measurements revealed similar galvanic corrosion potentials for the cold worked and directly aging conditions, indicating a minor role of corrosion in SCC propagation.
- 24 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSynergistic effects of nano-precipitates and cold work on the SCC growth behavior of Alloy 718
The stress corrosion cracking (SCC) propagation behavior of cold worked Alloy 718 subjected to different post-heat treatments was investigated in simulated pressurized water reactor (PWR) primary water. The results show that cold work significantly accelerated SCC propagation, with crack growth rates (CGRs) on the order of ~10-6 mm/s, whereas both post-heat treatments reduced the CGRs by nearly two orders of magnitude to ~10-8 mm/s. This behavior is mainly attributed to the partial relief of residual strain during heat treatment and the suppression of slip system by nano-precipitates, which alleviated the strain field of crack tips. Electrochemical measurements revealed similar galvanic corrosion potentials for the cold worked and directly aging conditions, indicating a minor role of corrosion in SCC propagation.
- Open Access
- 19 March 2026
- Published by Elsevier in SSRN Electronic Journal
A coupled phase-field–XFEM framework for passivation film-controlled stress corrosion cracking in high-temperature water
Stress corrosion cracking (SCC) in high-temperature water is governed by coupled electrochemical and mechanical processes, yet quantitative determination of local crack growth rate remains challenging due to limited resolution of oxide film evolution. Here, a coupled electro–chemo–mechanical framework is developed to explicitly capture oxide film growth, degradation, and rupture at the crack tip. By integrating electrochemical kinetics, mass transport, and mechanical response within a phase-field–XFEM approach, dynamic corrosion current decay and stress redistribution are resolved. The results demonstrate that increasing passive film thickness suppresses local corrosion current while progressively modifying crack-tip mechanical fields, enabling determination of characteristic oxide rupture thickness and time scales that mechanistically link oxide evolution to SCC crack growth rate.
- 19 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA coupled phase-field–XFEM framework for passivation film-controlled stress corrosion cracking in high-temperature water
Stress corrosion cracking (SCC) in high-temperature water is governed by coupled electrochemical and mechanical processes, yet quantitative determination of local crack growth rate remains challenging due to limited resolution of oxide film evolution. Here, a coupled electro–chemo–mechanical framework is developed to explicitly capture oxide film growth, degradation, and rupture at the crack tip. By integrating electrochemical kinetics, mass transport, and mechanical response within a phase-field–XFEM approach, dynamic corrosion current decay and stress redistribution are resolved. The results demonstrate that increasing passive film thickness suppresses local corrosion current while progressively modifying crack-tip mechanical fields, enabling determination of characteristic oxide rupture thickness and time scales that mechanistically link oxide evolution to SCC crack growth rate.
- Open Access
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
A coupled phase-field–XFEM framework for passivation film-controlled stress corrosion cracking in high-temperature water
Stress corrosion cracking (SCC) in high-temperature water is governed by coupled electrochemical and mechanical processes, yet quantitative determination of local crack growth rate remains challenging due to limited resolution of oxide film evolution. Here, a coupled electro–chemo–mechanical framework is developed to explicitly capture oxide film growth, degradation, and rupture at the crack tip. By integrating electrochemical kinetics, mass transport, and mechanical response within a phase-field–XFEM approach, dynamic corrosion current decay and stress redistribution are resolved. The results demonstrate that increasing passive film thickness suppresses local corrosion current while progressively modifying crack-tip mechanical fields, enabling determination of characteristic oxide rupture thickness and time scales that mechanistically link oxide evolution to SCC crack growth rate.
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA coupled phase-field–XFEM framework for passivation film-controlled stress corrosion cracking in high-temperature water
Stress corrosion cracking (SCC) in high-temperature water is governed by coupled electrochemical and mechanical processes, yet quantitative determination of local crack growth rate remains challenging due to limited resolution of oxide film evolution. Here, a coupled electro–chemo–mechanical framework is developed to explicitly capture oxide film growth, degradation, and rupture at the crack tip. By integrating electrochemical kinetics, mass transport, and mechanical response within a phase-field–XFEM approach, dynamic corrosion current decay and stress redistribution are resolved. The results demonstrate that increasing passive film thickness suppresses local corrosion current while progressively modifying crack-tip mechanical fields, enabling determination of characteristic oxide rupture thickness and time scales that mechanistically link oxide evolution to SCC crack growth rate.
- Open Access
- 17 March 2026
- Published by Elsevier in SSRN Electronic Journal
Crystal plasticity–based multi-mechanism modelling for intergranular stress corrosion cracking initiation in austenitic stainless steel under high-temperature water
Intergranular stress corrosion cracking (IGSCC) in cold-worked (CW) 316L stainless steel (SS) arises from the coupled effects of mechanical loading, high-temperature aqueous corrosion, and microstructural heterogeneity; however, their integrated contribution to crack initiation remains insufficiently understood, limiting reliable assessment of reactor structural integrity under corrosive environments. In this work, a coupled crystal plasticity-electrochemical model (CPECM) integrated with a cohesive zone model (CZM) is developed to investigate IG crack initiation in CW 316L SS. Within the proposed framework, crystallographic slip strain-induced variations in local electrode potential and electrochemical polarization are incorporated into the evaluation of anodic and cathodic reaction kinetics, which are further coupled with solution-equilibrium and mass-transport calculations to establish the local corrosion response. The resulting grain-boundary (GB) electrochemical states are mapped into the CZM to drive crack initiation, while the evolution of stress and slip strain distributions is explicitly quantified. Polycrystalline representative volume elements reconstructed from experimentally characterized microstructures are employed to provide physically realistic grain size and crystallographic orientation distributions for the simulations. The experimental and numerical results reveal a pronounced grain-size and orientation dependence of IGSCC initiation. Grain refinement promotes local corrosion current intensification and crack initiation. Cracks preferentially initiate along GBs with misorientation angles of approximately 40–55°, where slip incompatibility, anodic current density, and aggressive-ion enrichment concurrently reach elevated levels, whereas Σ3 and low-angle GBs exhibit substantially reduced susceptibility. Sensitivity analyses confirm that these indicators consistently govern GB susceptibility across model variations. The quantitative comparison with SCC initiation experiments yields a mean relative error of 6.4%, demonstrating the enhanced predictive capability of the proposed framework for microstructure-sensitive IGSCC initiation.
- 17 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCrystal plasticity–based multi-mechanism modelling for intergranular stress corrosion cracking initiation in austenitic stainless steel under high-temperature water
Intergranular stress corrosion cracking (IGSCC) in cold-worked (CW) 316L stainless steel (SS) arises from the coupled effects of mechanical loading, high-temperature aqueous corrosion, and microstructural heterogeneity; however, their integrated contribution to crack initiation remains insufficiently understood, limiting reliable assessment of reactor structural integrity under corrosive environments. In this work, a coupled crystal plasticity-electrochemical model (CPECM) integrated with a cohesive zone model (CZM) is developed to investigate IG crack initiation in CW 316L SS. Within the proposed framework, crystallographic slip strain-induced variations in local electrode potential and electrochemical polarization are incorporated into the evaluation of anodic and cathodic reaction kinetics, which are further coupled with solution-equilibrium and mass-transport calculations to establish the local corrosion response. The resulting grain-boundary (GB) electrochemical states are mapped into the CZM to drive crack initiation, while the evolution of stress and slip strain distributions is explicitly quantified. Polycrystalline representative volume elements reconstructed from experimentally characterized microstructures are employed to provide physically realistic grain size and crystallographic orientation distributions for the simulations. The experimental and numerical results reveal a pronounced grain-size and orientation dependence of IGSCC initiation. Grain refinement promotes local corrosion current intensification and crack initiation. Cracks preferentially initiate along GBs with misorientation angles of approximately 40–55°, where slip incompatibility, anodic current density, and aggressive-ion enrichment concurrently reach elevated levels, whereas Σ3 and low-angle GBs exhibit substantially reduced susceptibility. Sensitivity analyses confirm that these indicators consistently govern GB susceptibility across model variations. The quantitative comparison with SCC initiation experiments yields a mean relative error of 6.4%, demonstrating the enhanced predictive capability of the proposed framework for microstructure-sensitive IGSCC initiation.