HCHuatan Chen

Huatan Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Huatan Chen has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Facile One‐Step Fabrication of Bimodal Nanofibrous Membrane With Antibacterial and Thermal‐Comfort Features for Air Filtration via Precursor Regulation

    by Huatan Chen, Xianruo Du, Ruixin Chen, Zhongyi Yu, Yang Huang, Bofeng Li, Jiaxin Jiang, Zungui Shao, Gaofeng Zheng, Xiang Wang, et al.

    Multifunctional air filters require a balance between particle capture, airflow resistance and antibacterial activity. Here, a bimodal polyvinylidene fluoride (PVDF) nanofibrous membrane is prepared by one‐step electrospinning using silver acetate (SA) and isopropanolamine (MIPA) to regulate the precursor solution. At an appropriate MIPA concentration, the solution viscosity decreases and its conductivity increases, favoring the formation of distinct fine and coarse‐fiber populations. These changes suggest that enhanced jet stretching and possible jet splitting contribute to the bimodal morphology. X‐ray photoelectron spectroscopy is consistent with a metallic Ag contribution within the silver‐containing components. The optimized PVDF/1SA/1.4MIPA membrane achieves a filtration efficiency of 99.18%, a pressure drop of 50.6 Pa and a quality factor of 0.095 Pa − 1 for 0.3 µm NaCl aerosol at 32 L min − 1 . In immersion assays, inhibition rates against Escherichia coli and Staphylococcus aureus reach 99.42% and 99.78%, respectively. Respiratory‐cycle thermography reveals a reversible surface‐temperature response under the tested conditions, suggesting potential relevance to thermal comfort. This precursor‐regulation strategy combines bimodal fiber formation and antibacterial functionality in a single electrospinning step.

  • Open Access

    Electrospun Porous Materials for the Next‐Generation Proton Exchange Membrane Fuel Cells: Progress, Challenges, and AI‐Optimized Perspectives

    by Shangfeng Jiang, Panfeng Wang, You Gong, Zeyu Sun, Huatan Chen, Geng Wang, Ting Tao, Chuang Zhai, Xi Wang, Ruixin Chen, et al.

    The performance and commercial viability of proton exchange membrane fuel cells (PEMFCs) are constrained by key limitations in the membrane electrode assembly, including Nafion membrane swelling, low catalyst utilization, and inadequate water management in gas diffusion layers. Electrospinning has emerged as a promising technique for optimizing electrode components due to its unique capability to tailor fiber morphology, pore structure, and surface chemistry. Recent advances have incorporated artificial intelligence (AI) to assist in the design and optimization of porous materials, enabling efficient prediction of structural properties and performance. However, a systematic integration of AI into electrospinning processes to fabricate porous PEMFC components remains underdeveloped. This review comprehensively summarizes the application of electrospun materials in PEMFCs, emphasizing the structure–performance relationships in catalyst layers, gradient‐designed gas diffusion layers, and reinforced proton exchange membranes. Furthermore, it offers a forward‐looking perspective on the potential of AI‐assisted manufacturing strategies for advancing next‐generation high‐performance membrane electrodes.

  • Open Access

    Flexible Electromagnetic Actuator with Liquid Metal Embedded in a Graphene Oxide/Thermoplastic Polyurethane Matrix

    by Shufan Li, Yusuo Tian, Yang Zhang, Huatan Chen, Wenwang Li, Gaofeng Zheng, Xiang Wang

    Flexible electromagnetic actuators have attracted considerable attention for applications in soft robotics, adaptive manipulation, and human–machine interaction due to their fast response, large deformation capability, and inherent compliance. However, the concurrent application of high actuation performance and long-term cyclic durability remains a major challenge, particularly for liquid metal (LM)-based soft systems, where interfacial instability between LM conductors and polymer substrates often leads to performance degradation. In this work, we report a fabrication strategy in which patterned eutectic gallium–indium (EGaIn) liquid metal circuits are directly written onto electrospun graphene oxide/thermoplastic polyurethane (GO/TPU) nanofiber membranes. The incorporation of graphene oxide significantly enhances interfacial adhesion through hydrogen bonding interactions between oxygen-containing functional groups in GO and the native Ga2O3 layer on the LM surface, while the electrospun fibrous architecture further improves mechanical interlocking and structural stability. As a result, the fabricated actuator exhibits robust electromechanical performance, achieving a maximum bending deformation of 90° under a driving current of 0.8 A and maintaining stable operation over 2000 actuation cycles with negligible performance degradation. To further demonstrate its practical functionality, a soft robotic gripper was constructed based on the optimized actuator configuration. The gripper enables the stable grasping and lifting of objects with a weight up to seven times its own mass, while maintaining safe and compliant interaction with fragile objects. This work provides a simple yet effective strategy to simultaneously enhance actuation efficiency, interfacial stability, and mechanical reliability in LM-based GO/TPU flexible electromagnetic actuator systems, offering promising potential for next-generation soft robotic applications.


  • High-Performance ZnO/PEO Flexible Strain Sensors for Accurate Human Physiological Signal Monitoring

    by Zhongyi Yu, Yang Huang, Bofeng Li, Xianruo Du, Ruixin Chen, Gaofeng Zheng, Xiang Wang, Jiaxin Jiang, Huatan Chen

  • Open Access

    High-Entropy Alloys: A Review of Emerging Sensing Materials for Next-Generation Flexible Electronics

    by Huatan Chen, Zhongyi Yu, Yang Huang, Bofeng Li, Fangting Feng, Yuming Jiang, Yuting Duan, Gaofeng Zheng, Zungui Shao

    High-entropy alloys (HEAs), composed of five or more principal elements in near-equimolar ratios, have emerged as a groundbreaking class of materials for next-generation flexible electronics. This review systematically examines the unique potential of HEAs as sensing materials, moving beyond their traditional role as structural components. We first elucidate the fundamental mechanisms—core effects including lattice distortion, sluggish diffusion, and the cocktail effect—that endow HEAs with an exceptional synergy of high strength, good ductility, tunable electrical resistivity, and superior electrocatalytic activity. Subsequently, we critically analyze the state-of-the-art strategies for processing HEA-based micro/nano structures, including mechanical alloying, wet-chemical synthesis, and non-equilibrium deposition techniques, with an emphasis on their compatibility with flexible substrates. The core of the review categorizes and discusses the latest advances in HEA-based flexible sensors for strain/stress, gas, and electrochemical (e.g., glucose, biomarkers, heavy metals) detection, highlighting the structure–property–performance relationships. Representative studies have demonstrated that HEA flexible strain sensors achieve a temperature coefficient of resistance as low as 45.59 ppm/K with no signal drift over 6000 stretching cycles; room-temperature hydrogen sensors reach a detection limit down to 31 ppb with a response time of 19 s; and non-enzymatic glucose sensors deliver a sensitivity up to 3043 μA·mM−1·cm−2. Finally, we summarize the key challenges—such as manufacturing scalability, long-term stability under dynamic deformation, and cost-effectiveness—and provide a forward-looking perspective on promising research directions, including high-throughput compositional screening, multi-functional sensor arrays, and the integration of machine learning for rational material design.


  • Open Access

    Research on monocular and binocular calibration methods for line-scan cameras based on a viewing-plane coordinate system and a virtual 3-D target

    by Shuzong Yan, Shicong Niu, Feifei Li, Xiaochen Wang, Huatan Chen, Runyang Zhang

    Traditional calibration methods for line-scan cameras often impose stringent requirements on the displacement accuracy and manufacturing precision of calibration targets. Line-scan cameras are increasingly used in demanding industrial applications, such as high-speed inline measurement and surface defect inspection, because of their high scanning frequency, continuous imaging capability, and high transmission efficiency. Furthermore, the research on binocular stereocalibration methodologies for line-scan cameras remains relatively limited and operationally complex. In particular, there is still a lack of in-depth theoretical research on viewing-plane coincidence adjustment, which fundamentally restricts the spatial detection accuracy of binocular line-scan systems. To address these challenges, this paper proposes a novel static calibration method for monocular line-scan cameras by introducing a viewing-plane coordinate system into a traditional imaging model. This approach uses a simply designed 2-D calibration target and eliminates the need for complex patterns or precise target translation. Building on this monocular framework, we developed a comprehensive binocular line-scan camera imaging model. A key contribution of this study is the introduction of a viewing-plane coincidence correction model that effectively mitigates the potential parallax issues in binocular systems. Subsequently, a virtual 3-D target-based calibration method for binocular line-scan cameras was proposed to facilitate highly accurate spatial detection. Experimental validation demonstrated the high precision and robustness of the proposed approach. The monocular calibration achieves a root mean square reprojection error of 0.26 pixels, while the binocular system attains a spatial detection accuracy of 0.12 mm. These results confirm the efficacy and potential of the proposed methods for high-precision machine-vision applications.

  • Open Access

    Preparation and Optimization of Silver Nanoparticle-Loaded Dendritic Fibrous Membranes for High-Efficiency Antibacterial Activity and Air Filtration

    by Yang Huang, Bofeng Li, Zhongyi Yu, Xianruo Du, Ruixin Chen, Xiang Wang, Jiaxin Jiang, Gaofeng Zheng, Huatan Chen

    Metal nanoparticles are widely used in fibrous membrane materials due to their excellent antibacterial properties. However, metal nanoparticle-loaded fibrous membranes often face the trade-off between antibacterial performance and filtration efficiency. To address this issue, silver nanoparticle-loaded dendritic fibrous membranes were prepared via electrospinning technology in this study, and the dual optimization of antibacterial and filtration performance was achieved by adjusting the silver loading amount and fiber morphology. The results showed that the prepared silver nanoparticle-loaded PVDF dendritic fibrous membrane exhibited an outstanding air filtration performance with a filtration efficiency of 99.87% for 0.3 µm particulate matter, a pressure drop of 87.4 Pa, and a quality factor (QF) of 0.076 Pa−1. In addition, the membrane presented excellent antibacterial activity with inhibition rates of 99.9% and 99.8% against Escherichia coli and Staphylococcus aureus, respectively. This study provides a new insight into resolving the trade-off between air filtration and antibacterial performance of metal nanoparticle-loaded fibrous membranes and offers an important reference for applications in related fields.


  • Open Access

    Ultra-sensitive fiber strain sensor via AgNWs/CNTs decorated electrospun TPU nanofiber bundles

    by Shufan Li, Lilong Wang, Shicong Niu, Runyang Zhang, Huatan Chen, Gaofeng Zheng, Wenwang Li, Dezhi Wu, Xiang Wang

    With the rapid advancement of flexible electronics, strain sensors must achieve high sensitivity, wide detection range, and long-term stability. However, conventional micro-nano fabrication techniques face challenges in simultaneously developing highly oriented, strain-sensitive layers with multilevel porosity and three-dimensional conductive networks on flexible substrates, hindering the concurrent enhancement of sensitivity and sensing range in resistive sensors. In this study, a hybrid conductive network of silver nanowires (AgNWs) and carbon nanotubes (CNTs) is integrated onto a thermoplastic polyurethane (TPU) nanofiber bundle scaffold via conjugated electrospinning and multiple immersion processes. The highly oriented, multilevel porous structure of TPU nanofibers facilitates efficient stress distribution, while the successive immersion processes create conductive AgNW pathways and mechanically reinforcing CNT nodes, both within and on the fiber surfaces. This synergistic architecture results in an ultrabroad detection range (0–148%) with extraordinary ultrahigh sensitivity, delivering gauge factors of 45.4 (0–35%), 413.1 (35–57%), 2704.7 (57–87%), and an exceptional maximum of 14302.4 at 87–148% strain. The sensor demonstrates a rapid response time of less than 280 ms and stable performance over 5000 stretching cycles. The device shows significant promise for applications in wearable health monitoring, offering a promising strategy for designing next-generation flexible strain sensors that simultaneously achieve ultrahigh sensitivity, broad working range, and long-term durability.

  • Open Access

    High-Performance ZnO/PEO Flexible Strain Sensors for Accurate Human Physiological Signal Monitoring

    by Zhongyi Yu, Yang Huang, Bofeng Li, Xianruo Du, Ruixin Chen, Gaofeng Zheng, Xiang Wang, Jiaxin Jiang, Huatan Chen

    Flexible wearable sensors serve as the core sensing components of wearable devices and human-computer interaction systems. Possessing the superiorities of flexibility, bendability, light weight and conformal adhesion to the human body, they can accurately capture physical signals such as human physiological parameters, thus exhibiting broad application prospects in fields including medical health monitoring. At present, flexible strain sensors are plagued by several critical issues such as the agglomeration of sensitive materials, complex fabrication processes and poor interfacial compatibility, which have severely restricted their performance enhancement. In this study, a synergistic regulation strategy of metal ion complexation-in-situ nanocrystal growth is proposed. With isopropanolamine as the complexing agent, the uniform dispersion of Zn²⁺ in the polyethylene oxide (PEO) matrix is achieved via coordination interaction. Combined with the mild redox reaction induced by ultraviolet light, zinc oxide (ZnO) nanoparticles are directionally grown in-situ inside and on the surface of flexible fibers, thus constructing a continuous and dense conductive network. A ZnO/PEO flexible strain sensor was fabricated based on this strategy, and systematic tests demonstrated that the sensor exhibits a favorable linear response in the strain range of 0~40% with a gauge factor (GF) of 20.5. At a microstrain of 1%, the response time and recovery time of the sensor are merely 24 ms and 48 ms, respectively. After cyclic stretching, the peak deviation of the relative resistance change is less than 2%, and the sensor also possesses excellent strain rate insensitivity. When applied to human physiological signal monitoring, the sensor can accurately capture the motion strain signals of human fingers, wrists and elbow joints, and clearly distinguish different motion patterns. This study provides a novel and facile technical strategy for fabricating high-performance ZnO-based flexible strain sensors, and the as-prepared sensor holds great application potential in the fields of wearable health monitoring and human-computer interaction.