Marcelo Rodríguez Valdivia

A magnetite–eggshell nanocomposite (Fe₃O₄@eggshell NC) was synthesized by green coprecipitation and evaluated for Cr(VI) removal from water. Passiflora ligularis peel extract, evaluated using a 2³ factorial design, served as the biogenic medium, while eggshell waste acted as the support. Characterization included X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning and transmission electron microscopy (SEM and TEM), Brunauer–Emmett–Teller (BET) analysis, zeta potential measurements, thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), and Mössbauer spectroscopy. The NC preserved Fe₃O₄ and CaCO₃ crystalline phases, contained nanoparticles averaging 18 nm, and exhibited oxygenated surface functionalities, a BET surface area of 134.93 m²/g, amphoteric behavior, and a predominantly superparamagnetic response suitable for magnetic recovery. Under conditions of pH 4, 180 rpm, 60 min, 0.15 g NC, and 50 mg/L Cr(VI), removal reached 75.98%. Kinetic data followed the pseudo-first-order model, whereas equilibrium data were well described by the Sips isotherm, with an estimated capacity of 50.81 mg/g. At the investigated initial concentration of 50 mg/L, adsorption was exothermic and favored at temperatures up to 308 K, and the material retained moderate reusability during the first three alkaline-regeneration cycles. Overall, Fe₃O₄@eggshell NC is a waste-derived, magnetically recoverable adsorbent with favorable Cr(VI) uptake under moderately acidic conditions.

The persistence of azo dyes in industrial effluents poses significant environmental risks; therefore, there is a need to develop effective adsorbents. This study investigates the efficiency of a Cu₂O/CuO nanocomposite as an adsorbent for the removal of a model dye, methyl orange (MO), from aqueous solutions. The material was characterized by XRD, SEM and BET analyses, revealing a dominant Cu₂O phase (96 wt%) with CuO fractions, and an average particle size of ~18 nm paired with a specific surface area of 19.54 m² g⁻¹. FTIR and TOC assays revealed the adsorption and degradation of MO by action of the nanocomposite. Operational parameters such as adsorbent dosage, initial dye concentration, pH, and the point of zero charge (PZC) were investigated. Under the optimized conditions, the nanocomposite achieved a dye removal efficiency of 97.0%. The kinetic results showed a strong correlation with the pseudo-second-order model. Furthermore, isotherm analysis revealed that the adsorption process is best described by the Langmuir–Freundlich model, demonstrating an outstanding maximum theoretical adsorption capacity (q_max) of 254.76 mg g⁻¹, which closely aligns with the experimental value (249.48 mg g⁻¹). The findings demonstrated that the synthesized Cu₂O/CuO nanocomposite acts as an efficient and promising adsorbent for the remediation of dye-contaminated waters.