Seyit Karatepe
Seyit Karatepe has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ahmet Yazar
RD Department, Turk Telekom, Ankara, Trkiye
2 shared publications - Erim Ficici
RD Department, Turk Telekom, Ankara, Trkiye
2 shared publications - Mustafa Serdar Osmanca
Research and Development Department, Turk Telekom, Ankara, Trkiye
2 shared publications - Umut Keten
Network Architectural Department, Turk Telekom, Ankara, Trkiye
2 shared publications - Kahraman Zaim
Department of Electrical and Electronics Engineering, Institute of Science, Gazi University, 06560 Ankara, Türkiye
1 shared publication - Murat Yucel
Gazı University
1 shared publication
Latest Publications
- Open Access
Narrowband Internet of Things over Non-Terrestrial Networks for Remote Renewable-Energy Management: Architecture and Performance Evaluation
Reliable communication is essential for monitoring and supervisory operation of renewable-energy facilities beyond terrestrial-network coverage. This study proposes a four-layer Internet of Things (IoT) architecture aligned with 3GPP Release 17, integrating sensors, an edge gateway, Narrowband IoT (NB-IoT) access through a transparent satellite payload, terrestrial core-network functions, and centralized IoT, Energy Management System (EMS), and Supervisory Control and Data Acquisition (SCADA) applications. A 3GPP-aligned analytical framework evaluates satellite geometry, transparent-path propagation delay, deterministic uplink and downlink margins, and pass-level outage probability for Low Earth Orbit (LEO) satellites at 600 and 1200 km, medium Earth orbit (MEO) at 10,000 km, and geostationary Earth orbit (GEO) at 35,786 km, complemented by a waveform-level Narrowband Physical Downlink Shared Channel (NPDSCH) reliability experiment for a representative LEO-600 downlink. At a 50° elevation angle, the one-way satellite-induced propagation delay ranges from 5.08 ms (LEO-600) to 247.35 ms (GEO). With single transmission, the uplink is the limiting direction and does not achieve link closure in any evaluated scenario. The LEO downlinks achieve positive margins at sufficiently high elevation angles. A 1% pass-averaged outage probability requires approximately 17 dB of uplink coverage enhancement for LEO-600, whereas the MEO and GEO requirements exceed the standardized repetition range. Realized NPDSCH repetition gains (approximately 5.5 and 9 dB for 8 and 32 repetitions) remain below the ideal values. The findings identify the link-budget and delay conditions under which NTN-assisted IoT may support periodic monitoring, alarm and maintenance traffic, and non-time-critical supervisory communication, while protection functions remain local.
Open AccessNarrowband Internet of Things over Non-Terrestrial Networks for Remote Renewable-Energy Management: Architecture and Performance Evaluation
Reliable communication is essential for monitoring and supervisory operation of renewable-energy facilities beyond terrestrial-network coverage. This study proposes a four-layer Internet of Things (IoT) architecture aligned with 3GPP Release 17, integrating sensors, an edge gateway, Narrowband IoT (NB-IoT) access through a transparent satellite payload, terrestrial core-network functions, and centralized IoT, Energy Management System (EMS), and Supervisory Control and Data Acquisition (SCADA) applications. A 3GPP-aligned analytical framework evaluates satellite geometry, transparent-path propagation delay, deterministic uplink and downlink margins, and pass-level outage probability for Low Earth Orbit (LEO) satellites at 600 and 1200 km, medium Earth orbit (MEO) at 10,000 km, and geostationary Earth orbit (GEO) at 35,786 km, complemented by a waveform-level Narrowband Physical Downlink Shared Channel (NPDSCH) reliability experiment for a representative LEO-600 downlink. At a 50° elevation angle, the one-way satellite-induced propagation delay ranges from 5.08 ms (LEO-600) to 247.35 ms (GEO). With single transmission, the uplink is the limiting direction and does not achieve link closure in any evaluated scenario. The LEO downlinks achieve positive margins at sufficiently high elevation angles. A 1% pass-averaged outage probability requires approximately 17 dB of uplink coverage enhancement for LEO-600, whereas the MEO and GEO requirements exceed the standardized repetition range. Realized NPDSCH repetition gains (approximately 5.5 and 9 dB for 8 and 32 repetitions) remain below the ideal values. The findings identify the link-budget and delay conditions under which NTN-assisted IoT may support periodic monitoring, alarm and maintenance traffic, and non-time-critical supervisory communication, while protection functions remain local.
- Open Access
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
5G and Beyond Positioning Over Precise Time Network Synchronization
High accuracy positioning has become a key capability for fifth generation (5G) mobile networks and their future generations; however, the achievable performance is still severely limited by network time synchronization, particularly for positioning schemes based on the time difference of arrival (TDOA) principle. This investigation examines the impact of inter next-generation NodeB (gNB) timing uncertainty on 5G New Radio (NR) positioning in a 3rd Generation Partnership Project (3GPP) compliant Urban Macro (UMa) environment, and quantifies the performance improvements that are possible through deployment of a Precision Time Network (PTN) overlay as compared to typical Global Navigation Satellite System (GNSS) based synchronization techniques. A downlink NR positioning reference signal (NR-PRS) derived TDOA measurement and positioning model is employed in this work, in which gNB to gNB clock offsets are explicitly represented in the observation equations, enabling a clear separation of the contributions of radio measurement noise, geometry, and network time errors in the total localization error budget. The synchronization model is calibrated using representative residual timing regimes motivated by measurement-based data from an operated PTN infrastructure and by commonly assumed GNSS timing performance, corresponding to PTN-grade and GNSS-grade synchronization levels, respectively. Rather than treating these cases only as fixed deterministic offsets, the analysis models them as effective residual timing regimes with different uncertainty levels. Extensive Monte Carlo simulations are then performed in a two-dimensional UMa scenario using NR-PRS waveforms and a standard nonlinear least-squares solver for user equipment (UE) position estimation. In addition to the baseline timing comparison, a realistic propagation case is also considered through an effective measurement-level model that captures excess delay and increased timing uncertainty under non-line-of-sight (NLOS) conditions. The resulting error distributions for ideal timing, GNSS-grade timing, and PTN-grade timing show that PTN-grade synchronization leads to significant reductions in both median and upper-tail positioning errors when compared with GNSS-grade operation, while remaining substantially closer to the ideal timing reference under identical radio and geometry assumptions. In the baseline timing comparison, PTN-grade synchronization reduces the median and 90th-percentile positioning errors by about 29.8% and 29.7%, respectively, relative to GNSS-grade timing. Under realistic propagation, the overall error level increases for all synchronization modes, but PTN-grade timing still provides improvements of approximately 10.9% in median error and 11.7% at the 90th percentile relative to GNSS-grade timing. These results indicate that PTN based operator controlled timing overlays offer a practical and effective way to fully realize the potential of NR positioning in forthcoming 5G and beyond networks, and they are also expected to be a key enabler for high accuracy positioning and sensing in future 6G systems.
- 23 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Open Access5G and Beyond Positioning Over Precise Time Network Synchronization
High accuracy positioning has become a key capability for fifth generation (5G) mobile networks and their future generations; however, the achievable performance is still severely limited by network time synchronization, particularly for positioning schemes based on the time difference of arrival (TDOA) principle. This investigation examines the impact of inter next-generation NodeB (gNB) timing uncertainty on 5G New Radio (NR) positioning in a 3rd Generation Partnership Project (3GPP) compliant Urban Macro (UMa) environment, and quantifies the performance improvements that are possible through deployment of a Precision Time Network (PTN) overlay as compared to typical Global Navigation Satellite System (GNSS) based synchronization techniques. A downlink NR positioning reference signal (NR-PRS) derived TDOA measurement and positioning model is employed in this work, in which gNB to gNB clock offsets are explicitly represented in the observation equations, enabling a clear separation of the contributions of radio measurement noise, geometry, and network time errors in the total localization error budget. The synchronization model is calibrated using representative residual timing regimes motivated by measurement-based data from an operated PTN infrastructure and by commonly assumed GNSS timing performance, corresponding to PTN-grade and GNSS-grade synchronization levels, respectively. Rather than treating these cases only as fixed deterministic offsets, the analysis models them as effective residual timing regimes with different uncertainty levels. Extensive Monte Carlo simulations are then performed in a two-dimensional UMa scenario using NR-PRS waveforms and a standard nonlinear least-squares solver for user equipment (UE) position estimation. In addition to the baseline timing comparison, a realistic propagation case is also considered through an effective measurement-level model that captures excess delay and increased timing uncertainty under non-line-of-sight (NLOS) conditions. The resulting error distributions for ideal timing, GNSS-grade timing, and PTN-grade timing show that PTN-grade synchronization leads to significant reductions in both median and upper-tail positioning errors when compared with GNSS-grade operation, while remaining substantially closer to the ideal timing reference under identical radio and geometry assumptions. In the baseline timing comparison, PTN-grade synchronization reduces the median and 90th-percentile positioning errors by about 29.8% and 29.7%, respectively, relative to GNSS-grade timing. Under realistic propagation, the overall error level increases for all synchronization modes, but PTN-grade timing still provides improvements of approximately 10.9% in median error and 11.7% at the 90th percentile relative to GNSS-grade timing. These results indicate that PTN based operator controlled timing overlays offer a practical and effective way to fully realize the potential of NR positioning in forthcoming 5G and beyond networks, and they are also expected to be a key enabler for high accuracy positioning and sensing in future 6G systems.
- Open Access
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 57110-57122
NV Diamond Quantum Clocks: A New Era of Timing for 6G, Navigation, and Autonomous Systems
Precision timing serves as a foundational pillar for modern communication, navigation, and sensing systems, supporting applications ranging from Global Navigation Satellite Systems (GNSS) and radar to emerging 5G/6G networks and distributed edge computing. As synchronization requirements become increasingly stringent, traditional cesium (Cs) and rubidium (Rb) atomic clocks encounter growing challenges regarding their physical dimensions, power consumption, scalability, and environmental resilience. In this context, solid-state quantum clocks based on nitrogen-vacancy (NV) centers in diamond have emerged as a promising alternative. This paper examines NV-diamond quantum clocks through the lens of system and network engineering, emphasizing their relevance for communication and navigation frameworks. A typical NV-diamond clock architecture is evaluated at the system level, covering its stabilization methods, operational workflows, and integration factors. The projected timing capabilities of NV-based clocks are subsequently contrasted with conventional Cs and Rb standards across essential engineering and network-relevant parameters. Furthermore, this study explores key application domains, such as 6G synchronization, GNSS-denied navigation, and spaceborne systems, where the unique characteristics of NV-diamond clocks provide clear functional advantages. By bridging solid-state quantum clock technology with communication-centric synchronization requirements, this work provides a structured assessment of NV-diamond clocks as viable timing references for future resilient and scalable networks, while outlining the remaining technical challenges and research directions toward practical deployment.
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 57110-57122
Open AccessNV Diamond Quantum Clocks: A New Era of Timing for 6G, Navigation, and Autonomous Systems
Precision timing serves as a foundational pillar for modern communication, navigation, and sensing systems, supporting applications ranging from Global Navigation Satellite Systems (GNSS) and radar to emerging 5G/6G networks and distributed edge computing. As synchronization requirements become increasingly stringent, traditional cesium (Cs) and rubidium (Rb) atomic clocks encounter growing challenges regarding their physical dimensions, power consumption, scalability, and environmental resilience. In this context, solid-state quantum clocks based on nitrogen-vacancy (NV) centers in diamond have emerged as a promising alternative. This paper examines NV-diamond quantum clocks through the lens of system and network engineering, emphasizing their relevance for communication and navigation frameworks. A typical NV-diamond clock architecture is evaluated at the system level, covering its stabilization methods, operational workflows, and integration factors. The projected timing capabilities of NV-based clocks are subsequently contrasted with conventional Cs and Rb standards across essential engineering and network-relevant parameters. Furthermore, this study explores key application domains, such as 6G synchronization, GNSS-denied navigation, and spaceborne systems, where the unique characteristics of NV-diamond clocks provide clear functional advantages. By bridging solid-state quantum clock technology with communication-centric synchronization requirements, this work provides a structured assessment of NV-diamond clocks as viable timing references for future resilient and scalable networks, while outlining the remaining technical challenges and research directions toward practical deployment.