Wei Zhang
Research Subjects
Wei Zhang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Shujin Zhang
Guizhou Provincial Laboratory of Intelligent Development and Efficient Utilization of Energy, Guiyang 550081, China
2 shared publications Caiquan Su
Guizhou Energy Group Co., Ltd, Guiyang, 550081, China
1 shared publication- Dan Feng
School of Applied Economics, Guizhou University of Finance and Economics, Guiyang 550025, China
1 shared publication Ende Deng
1 shared publicationFayong Liu
1 shared publicationHuiyuan Zhang
1 shared publication
Latest Publications
- Open Access
Research on the Effectiveness of Gas Control in Low-Permeability Coal Seams Based on Microbial Gas Dissolution
To shorten the gas control period in low-permeability coal seams, the effectiveness of microbial gas dissolution technology for gas control was investigated through a combination of field tests and numerical simulations. First, three groups of injection boreholes were constructed, and the microbial gas-dissolving solution was injected into the coal seam, followed by an evaluation of the treatment effect after three days. Furthermore, based on a multiphysics-coupled modeling framework, the conventional borehole drainage process was simulated using the Partial Differential Equation (PDE) module of COMSOL Multiphysics to compare the evolution of coal seam gas pressure under conventional drainage with the field performance of the gas dissolution treatment. The results showed that the injected bioactive solution promoted methane oxidation and rapidly reduced the gas content and pressure in the treated region. After 3 days of gas dissolution treatment, the average gas content and gas pressure within the overlapping influence zones between the injection borehole groups decreased by 38.0% and 80.7%, respectively, relative to their initial values. However, the treatment effect gradually weakened with increasing distance from the injection zone, indicating spatial attenuation of the effective influence of the bioactive solution in the low-permeability coal seam. Comparatively, conventional drainage required approximately 68 days to reduce the gas pressure to the same level achieved by the gas dissolution treatment within 3 days, demonstrating that gas dissolution technology can drastically accelerate the gas control cycle. Nevertheless, further large-scale application requires consideration of economic feasibility and continued optimization of injection parameters and field implementation procedures.
Open AccessResearch on the Effectiveness of Gas Control in Low-Permeability Coal Seams Based on Microbial Gas Dissolution
To shorten the gas control period in low-permeability coal seams, the effectiveness of microbial gas dissolution technology for gas control was investigated through a combination of field tests and numerical simulations. First, three groups of injection boreholes were constructed, and the microbial gas-dissolving solution was injected into the coal seam, followed by an evaluation of the treatment effect after three days. Furthermore, based on a multiphysics-coupled modeling framework, the conventional borehole drainage process was simulated using the Partial Differential Equation (PDE) module of COMSOL Multiphysics to compare the evolution of coal seam gas pressure under conventional drainage with the field performance of the gas dissolution treatment. The results showed that the injected bioactive solution promoted methane oxidation and rapidly reduced the gas content and pressure in the treated region. After 3 days of gas dissolution treatment, the average gas content and gas pressure within the overlapping influence zones between the injection borehole groups decreased by 38.0% and 80.7%, respectively, relative to their initial values. However, the treatment effect gradually weakened with increasing distance from the injection zone, indicating spatial attenuation of the effective influence of the bioactive solution in the low-permeability coal seam. Comparatively, conventional drainage required approximately 68 days to reduce the gas pressure to the same level achieved by the gas dissolution treatment within 3 days, demonstrating that gas dissolution technology can drastically accelerate the gas control cycle. Nevertheless, further large-scale application requires consideration of economic feasibility and continued optimization of injection parameters and field implementation procedures.
- Open Access
- 6 July 2026
- Published by Elsevier in Journal of Hazardous Materials Advances
- Vol. 23
Influence of air quantity on dust migration and distribution during coal cutting operations at a longwall face: An experimental study
- 6 July 2026
- Published by Elsevier in Journal of Hazardous Materials Advances
- Vol. 23
Open AccessInfluence of air quantity on dust migration and distribution during coal cutting operations at a longwall face: An experimental study
- Open Access
Impact of Gas Components on the Determination of Coal Mine Gas Content: A Case Study from China
Accurate measurement of coal seam gas content forms the core foundation for coal mine disaster prevention and coalbed methane resource development. However, as coal mining in China extends into deeper strata, multi-component gases (CH4, CO2, N2, etc.) exhibit competitive adsorption effects and dynamic differentiation characteristics. These behaviors pose significant challenges to traditional measurement standards based on the “single methane-dominated system” assumption. This study systematically analyzes the competitive adsorption mechanisms of multi-component gases. By integrating gas data from major coal-producing provinces in China (such as Guizhou, Anhui, and Xinjiang), we reveal the heterogeneous distribution characteristics of gas components and their controlling factors, including coalification degree, burial depth, and maceral components. Case studies from Henan and Shanxi provinces demonstrate that neglecting the strong adsorption hysteresis of CO2 and the rapid desorption characteristics of N2 induces a systematic error exceeding 25% in total gas content measurements within areas high in non-methane components. To address these issues, we propose a “hierarchical measurement and real-time correction” framework for multi-component gas content. This framework categorizes gas measurement into four levels—ranging from single-component to all components—based on the complexity of geological conditions. It combines differentiated measurement with dynamic correction to improve the accuracy of gas content evaluation under complex geological conditions. This research provides a more reliable theoretical basis for gas pressure prediction and mine gas grade identification, offering substantial theoretical significance and engineering value for enhancing safety guarantees in deep coal mining.
Open AccessImpact of Gas Components on the Determination of Coal Mine Gas Content: A Case Study from China
Accurate measurement of coal seam gas content forms the core foundation for coal mine disaster prevention and coalbed methane resource development. However, as coal mining in China extends into deeper strata, multi-component gases (CH4, CO2, N2, etc.) exhibit competitive adsorption effects and dynamic differentiation characteristics. These behaviors pose significant challenges to traditional measurement standards based on the “single methane-dominated system” assumption. This study systematically analyzes the competitive adsorption mechanisms of multi-component gases. By integrating gas data from major coal-producing provinces in China (such as Guizhou, Anhui, and Xinjiang), we reveal the heterogeneous distribution characteristics of gas components and their controlling factors, including coalification degree, burial depth, and maceral components. Case studies from Henan and Shanxi provinces demonstrate that neglecting the strong adsorption hysteresis of CO2 and the rapid desorption characteristics of N2 induces a systematic error exceeding 25% in total gas content measurements within areas high in non-methane components. To address these issues, we propose a “hierarchical measurement and real-time correction” framework for multi-component gas content. This framework categorizes gas measurement into four levels—ranging from single-component to all components—based on the complexity of geological conditions. It combines differentiated measurement with dynamic correction to improve the accuracy of gas content evaluation under complex geological conditions. This research provides a more reliable theoretical basis for gas pressure prediction and mine gas grade identification, offering substantial theoretical significance and engineering value for enhancing safety guarantees in deep coal mining.
- Open Access
- 13 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Determination of critical thresholds for sensitive indicators in coal and gas outburst prediction for deep complex coal seams: methodology and application
Coal and gas outburst represents a highly destructive dynamic phenomenon inherent in deep coal mining operations. Currently, outburst prediction frameworks rely heavily on a uniform critical threshold system recommended by national regulations. However, within heterogeneous coal seams characterized by complex geological conditions, this universal approach frequently leads to "low-index outburst" incidents or excessive engineering redundancy, significantly undermining the intrinsic safety of mine operations. To address this core scientific bottleneck, the present study establishes a theoretical methodology for the quantitative determination of sensitive prediction indicators and proposes a hierarchical optimization framework for both regional and local critical thresholds. By integrating long-term historical statistics, laboratory kinetic tests of gas desorption, and in-situ multi-point tracking and verification, the critical thresholds undergo scientific calibration and site-specific alignment. Empirical research conducted on the No. 1 coal seam of the Miluo Coal Mine in Guizhou demonstrates that, at the regional prediction level, gas content and gas pressure exhibit equivalent sensitivity, with established critical values of 8.0 m3/t and 0.74 MPa, respectively. Furthermore, the sensitivity hierarchy for local prediction indicators was determined as [Formula: see text]. Significantly, the finalized local thresholds ([Formula: see text]= 0.47 mL/(g·min0.5), [Formula: see text]= 184 Pa, and S= 6.0 kg/m) are more stringent than the recommendations set forth in the Detailed Rules for Prevention and Control of Coal and Gas Outburst. The proposed prediction system effectively standardizes disaster characterization in complex coal seams and provides strategic guidance for coal mining enterprises to establish precision-based, site-specific outburst prevention standards. Coal and gas outbursts constitute a highly destructive dynamic phenomenon inherent in deep coal mining operations. Current outburst prediction frameworks largely depend on a uniform critical threshold system mandated by national regulations. However, in heterogeneous coal seams characterized by complex geological conditions, this universal approach frequently leads to "low-index outburst" incidents or excessive engineering redundancy, significantly undermining the intrinsic safety of mining operations. To resolve this fundamental scientific bottleneck, the present study establishes a theoretical methodology for the quantitative determination of sensitive prediction indicators and proposes a hierarchical optimization framework for both regional and local critical thresholds. By integrating long-term historical statistics, laboratory kinetic tests of gas desorption, and in-situ multi-point tracking and verification, the critical thresholds undergo rigorous scientific calibration and site-specific alignment. Empirical research conducted on the No. 1 coal seam of the Miluo Coal Mine in Guizhou demonstrates that, at the regional prediction level, gas content (w) and gas pressure (p) exhibit equivalent sensitivity, with established critical values of 8.0 m3/t and 0.74 MPa, respectively. Furthermore, the sensitivity hierarchy for local prediction indicators was established as [Formula: see text]. Significantly, the finalized local thresholds ([Formula: see text]= 0.47 mL/(g·min0.5), [Formula: see text]= 184 Pa, and S= 6.0 kg/m) are more stringent than the standards set forth in the Detailed Rules for Prevention and Control of Coal and Gas Outburst. The proposed prediction system effectively standardizes hazard characterization in complex coal seams and provides strategic guidance for coal mining enterprises to establish precision-based, site-specific outburst prevention standards.
- 13 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessDetermination of critical thresholds for sensitive indicators in coal and gas outburst prediction for deep complex coal seams: methodology and application
Coal and gas outburst represents a highly destructive dynamic phenomenon inherent in deep coal mining operations. Currently, outburst prediction frameworks rely heavily on a uniform critical threshold system recommended by national regulations. However, within heterogeneous coal seams characterized by complex geological conditions, this universal approach frequently leads to "low-index outburst" incidents or excessive engineering redundancy, significantly undermining the intrinsic safety of mine operations. To address this core scientific bottleneck, the present study establishes a theoretical methodology for the quantitative determination of sensitive prediction indicators and proposes a hierarchical optimization framework for both regional and local critical thresholds. By integrating long-term historical statistics, laboratory kinetic tests of gas desorption, and in-situ multi-point tracking and verification, the critical thresholds undergo scientific calibration and site-specific alignment. Empirical research conducted on the No. 1 coal seam of the Miluo Coal Mine in Guizhou demonstrates that, at the regional prediction level, gas content and gas pressure exhibit equivalent sensitivity, with established critical values of 8.0 m3/t and 0.74 MPa, respectively. Furthermore, the sensitivity hierarchy for local prediction indicators was determined as [Formula: see text]. Significantly, the finalized local thresholds ([Formula: see text]= 0.47 mL/(g·min0.5), [Formula: see text]= 184 Pa, and S= 6.0 kg/m) are more stringent than the recommendations set forth in the Detailed Rules for Prevention and Control of Coal and Gas Outburst. The proposed prediction system effectively standardizes disaster characterization in complex coal seams and provides strategic guidance for coal mining enterprises to establish precision-based, site-specific outburst prevention standards. Coal and gas outbursts constitute a highly destructive dynamic phenomenon inherent in deep coal mining operations. Current outburst prediction frameworks largely depend on a uniform critical threshold system mandated by national regulations. However, in heterogeneous coal seams characterized by complex geological conditions, this universal approach frequently leads to "low-index outburst" incidents or excessive engineering redundancy, significantly undermining the intrinsic safety of mining operations. To resolve this fundamental scientific bottleneck, the present study establishes a theoretical methodology for the quantitative determination of sensitive prediction indicators and proposes a hierarchical optimization framework for both regional and local critical thresholds. By integrating long-term historical statistics, laboratory kinetic tests of gas desorption, and in-situ multi-point tracking and verification, the critical thresholds undergo rigorous scientific calibration and site-specific alignment. Empirical research conducted on the No. 1 coal seam of the Miluo Coal Mine in Guizhou demonstrates that, at the regional prediction level, gas content (w) and gas pressure (p) exhibit equivalent sensitivity, with established critical values of 8.0 m3/t and 0.74 MPa, respectively. Furthermore, the sensitivity hierarchy for local prediction indicators was established as [Formula: see text]. Significantly, the finalized local thresholds ([Formula: see text]= 0.47 mL/(g·min0.5), [Formula: see text]= 184 Pa, and S= 6.0 kg/m) are more stringent than the standards set forth in the Detailed Rules for Prevention and Control of Coal and Gas Outburst. The proposed prediction system effectively standardizes hazard characterization in complex coal seams and provides strategic guidance for coal mining enterprises to establish precision-based, site-specific outburst prevention standards.