Sanwan Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sanwan Liu has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Nam-Gyu Park
Sungkyunkwan University
3 shared publications Guiming Fu
School of Chemical Engineering and Center for Antibonding Regulated Crystals, Sungkyunkwan University, Suwon, Republic of Korea
2 shared publicationsQisen Zhou
Wuhan National Laboratory for Optoelectronics (WNLO) Huazhong University of Science and Technology (HUST) Wuhan China
2 shared publications- Sang Uck Lee
School of Chemical Engineering Sungkyunkwan University Suwon Republic of Korea
2 shared publications - Seong Chan Cho
School of Chemical Engineering, Sungkyunkwan University (SKKU), Suwon, Republic of Korea
2 shared publications Shijie Zheng
Wuhan National Laboratory for Optoelectronics (WNLO) Huazhong University of Science and Technology (HUST) Wuhan China
2 shared publications
Latest Publications
- 3 September 2026
- Published by Springer Nature in Nature Materials
- p. 1-9
Octahedral connectivity reconfigures interfacial carrier-selective properties for efficient perovskite solar cells
Regulation of electron- or hole-selective interfacial properties has traditionally relied on extrinsic chemical doping. Here we report a structurally driven strategy for modulating carrier-selective electronic characteristics through the organic-cation-induced reconfiguration of lead iodide octahedral connectivity. Two closely related imidazoline-based cations, which differ by only a single heteroatom, drive the formation of one-dimensional organic lead triiodide phases with distinct octahedral-sharing patterns. Single-crystal analysis combined with theoretical calculations reveals that the variation in connectivity reshapes orbital coupling, leading to pronounced changes in the work function and absolute band-edge positions that give rise to distinct carrier-selective interfacial behaviour without the introduction of extrinsic dopants. Leveraging this structural reconfiguration-induced electronic modulation, we realize complementary charge-selective contacts in perovskite solar cells, achieving a power conversion efficiency of 27.61% (certified steady-state 27.19%), together with excellent operational stability and scalability, including 22.26% efficiency in 655-cm2 modules.
- 3 September 2026
- Published by Springer Nature in Nature Materials
- p. 1-9
Octahedral connectivity reconfigures interfacial carrier-selective properties for efficient perovskite solar cells
Regulation of electron- or hole-selective interfacial properties has traditionally relied on extrinsic chemical doping. Here we report a structurally driven strategy for modulating carrier-selective electronic characteristics through the organic-cation-induced reconfiguration of lead iodide octahedral connectivity. Two closely related imidazoline-based cations, which differ by only a single heteroatom, drive the formation of one-dimensional organic lead triiodide phases with distinct octahedral-sharing patterns. Single-crystal analysis combined with theoretical calculations reveals that the variation in connectivity reshapes orbital coupling, leading to pronounced changes in the work function and absolute band-edge positions that give rise to distinct carrier-selective interfacial behaviour without the introduction of extrinsic dopants. Leveraging this structural reconfiguration-induced electronic modulation, we realize complementary charge-selective contacts in perovskite solar cells, achieving a power conversion efficiency of 27.61% (certified steady-state 27.19%), together with excellent operational stability and scalability, including 22.26% efficiency in 655-cm2 modules.
- Open Access
- 23 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (36) , e73477
4‐Methylpyridine‐Mediated Homogenization of Wide‐Bandgap Perovskite Films for Efficient All‐Perovskite Tandem Solar Cells
Mixed‐halide wide‐bandgap (WBG) perovskites are promising top‑cell materials for multi‐junction photovoltaics owing to their tunable bandgap and excellent photoelectronic properties. However, their solution processing often suffers from mismatched crystallization kinetics between iodine and bromine species, leading to compositional inhomogeneity and limited device performance. Herein, we report a solvent engineering strategy by introducing 4‐methylpyridine (4‐MePy) as a coordinating modulator. 4‐MePy possesses strong coordinating ability and a moderate boiling point. It selectively retards the rapid crystallization of bromine‐rich components by interacting more strongly with lead bromide, thereby homogenizing the halide distribution. The resulting perovskite films exhibit low defect density, reduced lattice strain, and uniform composition and morphology. These improvements suppress carrier recombination and increase the halide migration barrier. Consequently, single‐junction WBG cells with a bandgap of 1.77 eV achieve a champion power conversion efficiency (PCE) of 20.68% and a high open‑circuit voltage ( V OC ) of 1.35 V. When integrated into all‐perovskite tandem solar cells, this strategy delivers PCEs of 29.70% (certified 29.17%) on 0.05 cm 2 and 29.00% on 1 cm 2 devices.
- 23 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (36) , e73477
Open Access4‐Methylpyridine‐Mediated Homogenization of Wide‐Bandgap Perovskite Films for Efficient All‐Perovskite Tandem Solar Cells
Mixed‐halide wide‐bandgap (WBG) perovskites are promising top‑cell materials for multi‐junction photovoltaics owing to their tunable bandgap and excellent photoelectronic properties. However, their solution processing often suffers from mismatched crystallization kinetics between iodine and bromine species, leading to compositional inhomogeneity and limited device performance. Herein, we report a solvent engineering strategy by introducing 4‐methylpyridine (4‐MePy) as a coordinating modulator. 4‐MePy possesses strong coordinating ability and a moderate boiling point. It selectively retards the rapid crystallization of bromine‐rich components by interacting more strongly with lead bromide, thereby homogenizing the halide distribution. The resulting perovskite films exhibit low defect density, reduced lattice strain, and uniform composition and morphology. These improvements suppress carrier recombination and increase the halide migration barrier. Consequently, single‐junction WBG cells with a bandgap of 1.77 eV achieve a champion power conversion efficiency (PCE) of 20.68% and a high open‑circuit voltage ( V OC ) of 1.35 V. When integrated into all‐perovskite tandem solar cells, this strategy delivers PCEs of 29.70% (certified 29.17%) on 0.05 cm 2 and 29.00% on 1 cm 2 devices.
- Top Cited Papers
- 14 May 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 392 (6799) , 742-748
An entropy-regulating molecular lock stabilizes formamidinium lead halide perovskite
A critical limitation of formamidinium lead iodide (FAPbI 3 ) perovskite solar cells (PSCs) lies in the intrinsic instability of the ionic–covalent Pb–I octahedral lattice, relative to the unfavorable hexagonal δ-phase under operating conditions. We report an entropy-regulating molecular-lock strategy using 1-pyridin-3-ylmethyl-piperazine hydrochloride (3-PMPCl). Strong interactions between the perovskite lattice surface and 3-PMPCl modulate the rotational freedom of organic cations and suppress the detrimental entropy increase associated with [PbI 6 ] 4− octahedra disorder or expansion. This entropy-favored environment intrinsically increases the phase transition energy barrier. The uniform distribution and strong adsorption of 3-PMPCl stabilize the α-phase under elevated temperature and humidity conditions. We achieved a certified power conversion efficiency (PCE) of 27.6% in FAPbI 3 -based PSCs. However, the operational stability of such champion devices remains below the state of the art. Adopting a stable bismuth electrode addresses this issue with a slight reduction in efficiency, yielding a device that retains 93.0% of its initial PCE (26.8%) after 1011 hours at 85°C under 1-sun illumination.
- 14 May 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 392 (6799) , 742-748
Top Cited PapersAn entropy-regulating molecular lock stabilizes formamidinium lead halide perovskite
A critical limitation of formamidinium lead iodide (FAPbI 3 ) perovskite solar cells (PSCs) lies in the intrinsic instability of the ionic–covalent Pb–I octahedral lattice, relative to the unfavorable hexagonal δ-phase under operating conditions. We report an entropy-regulating molecular-lock strategy using 1-pyridin-3-ylmethyl-piperazine hydrochloride (3-PMPCl). Strong interactions between the perovskite lattice surface and 3-PMPCl modulate the rotational freedom of organic cations and suppress the detrimental entropy increase associated with [PbI 6 ] 4− octahedra disorder or expansion. This entropy-favored environment intrinsically increases the phase transition energy barrier. The uniform distribution and strong adsorption of 3-PMPCl stabilize the α-phase under elevated temperature and humidity conditions. We achieved a certified power conversion efficiency (PCE) of 27.6% in FAPbI 3 -based PSCs. However, the operational stability of such champion devices remains below the state of the art. Adopting a stable bismuth electrode addresses this issue with a slight reduction in efficiency, yielding a device that retains 93.0% of its initial PCE (26.8%) after 1011 hours at 85°C under 1-sun illumination.
- Open Access
- 22 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17
Ambient-compatible precursor engineering for efficient perovskite photovoltaics
Achieving high-efficiency perovskite solar cells (PSCs) under ambient conditions remains a critical bottleneck for commercialization, primarily owing to the strong susceptibility of perovskite precursors and film formation processes to moisture and oxygen. Here, we develop a robust air-processing strategy for inverted PSCs by incorporating 1-butyl-3-methylimidazolium trifluoroacetate (BMIT) into precursor solutions, resulting in enhanced environmental tolerance of perovskite precursors by inhibiting iodide oxidation and facilitating stable film formation across a wide humidity range (20–60%). Moreover, the balanced ionic coordination suppresses Pb-I aggregation, mitigates colloidal clustering, and modulates nucleation kinetics, resulting in dense, highly crystalline perovskite films with excellent reproducibility. Consequently, we demonstrate high-efficiency devices across varied bandgaps (1.51, 1.54, and 1.68 eV), including a certified power conversion efficiency (PCE) of 26.48% with a fill factor of up to 85.00% for the 1.54-eV cell. Our device retains 96% of its initial PCE after 1,400 h of continuous 1-sun operation in ambient air.
- 22 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17
Open AccessAmbient-compatible precursor engineering for efficient perovskite photovoltaics
Achieving high-efficiency perovskite solar cells (PSCs) under ambient conditions remains a critical bottleneck for commercialization, primarily owing to the strong susceptibility of perovskite precursors and film formation processes to moisture and oxygen. Here, we develop a robust air-processing strategy for inverted PSCs by incorporating 1-butyl-3-methylimidazolium trifluoroacetate (BMIT) into precursor solutions, resulting in enhanced environmental tolerance of perovskite precursors by inhibiting iodide oxidation and facilitating stable film formation across a wide humidity range (20–60%). Moreover, the balanced ionic coordination suppresses Pb-I aggregation, mitigates colloidal clustering, and modulates nucleation kinetics, resulting in dense, highly crystalline perovskite films with excellent reproducibility. Consequently, we demonstrate high-efficiency devices across varied bandgaps (1.51, 1.54, and 1.68 eV), including a certified power conversion efficiency (PCE) of 26.48% with a fill factor of up to 85.00% for the 1.54-eV cell. Our device retains 96% of its initial PCE after 1,400 h of continuous 1-sun operation in ambient air.