Xiaohu Ao
Xiaohu Ao has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Daorina Bao
School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010010, China
3 shared publications - Ruijun Cui
School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010010, China
2 shared publications - Yongshui Luo
Yunda Energy Technology Group Co., Ltd., Hangzhou 311106, China
2 shared publications - Chengze Li
College of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010080, China
1 shared publication - Chuanjiu Zhang
School of Resources and Safety Engineering, Chongqing University, Chongqing 400044, China
1 shared publication - Guangqiang Yu
School of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010010, China
1 shared publication
Latest Publications
- Open Access
- 18 August 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (16) , 8465
Microenvironment Regulation and Plant Growth Responses Under Different Photovoltaic Tilt Angles for Sustainable Utilization of an Ash Storage Yard
Degraded industrial sites in arid and semi-arid regions often suffer from loose surface substrates, weak water-retention capacity, high wind-erosion risk, and poor early vegetation establishment. Combining photovoltaic (PV) deployment with ecological utilization may improve near-surface habitats by shading, reducing wind speed, and regulating soil heat and moisture. This study investigated an ash storage yard of a coal-fired power plant in Ordos, Inner Mongolia, China, by comparing soil temperature, soil moisture, and near-surface wind-speed responses under three representative fixed PV tilt angles of 36°, 43°, and 50°, together with the corresponding early plant-growth suitability. A multi-physics model coupling near-surface airflow, water-vapor transport, and porous-media hydrothermal migration was established. A Gaussian suitability function combined with AHP-CRITIC weighting was used to construct a model-based comprehensive growth index (CGI) from soil temperature and moisture, while short-term field monitoring was used to validate afternoon soil hydrothermal trends. Among the three scenarios, the 36° configuration produced the widest horizontal heat–moisture-affected zone and the highest CGI values for alfalfa and Elymus nutans, reaching 0.7741 and 0.6875, respectively. Relative to the outside reference area, the rear PV zone reduced the near-surface wind speed by 33–40% and increased the plant heights of alfalfa and Elymus nutans by 49.4% and 37.8%, respectively. A first-order PVsyst assessment showed that the 43° configuration achieved the highest specific energy yield of 1814 kWh kWp−1 year−1, whereas the annual grid-connected output at 36° was only 0.59% lower. These findings indicate that the 36° configuration may provide a favorable compromise between early vegetation establishment and photovoltaic electricity generation among the tested scenarios. By linking renewable-energy production with microenvironment regulation and early vegetation establishment, the proposed framework provides a decision basis for the multifunctional and sustainable reuse of degraded industrial land. Nevertheless, the results represent a site-specific, single-season assessment and should not be interpreted as a universal optimum.
- 18 August 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (16) , 8465
Open AccessMicroenvironment Regulation and Plant Growth Responses Under Different Photovoltaic Tilt Angles for Sustainable Utilization of an Ash Storage Yard
Degraded industrial sites in arid and semi-arid regions often suffer from loose surface substrates, weak water-retention capacity, high wind-erosion risk, and poor early vegetation establishment. Combining photovoltaic (PV) deployment with ecological utilization may improve near-surface habitats by shading, reducing wind speed, and regulating soil heat and moisture. This study investigated an ash storage yard of a coal-fired power plant in Ordos, Inner Mongolia, China, by comparing soil temperature, soil moisture, and near-surface wind-speed responses under three representative fixed PV tilt angles of 36°, 43°, and 50°, together with the corresponding early plant-growth suitability. A multi-physics model coupling near-surface airflow, water-vapor transport, and porous-media hydrothermal migration was established. A Gaussian suitability function combined with AHP-CRITIC weighting was used to construct a model-based comprehensive growth index (CGI) from soil temperature and moisture, while short-term field monitoring was used to validate afternoon soil hydrothermal trends. Among the three scenarios, the 36° configuration produced the widest horizontal heat–moisture-affected zone and the highest CGI values for alfalfa and Elymus nutans, reaching 0.7741 and 0.6875, respectively. Relative to the outside reference area, the rear PV zone reduced the near-surface wind speed by 33–40% and increased the plant heights of alfalfa and Elymus nutans by 49.4% and 37.8%, respectively. A first-order PVsyst assessment showed that the 43° configuration achieved the highest specific energy yield of 1814 kWh kWp−1 year−1, whereas the annual grid-connected output at 36° was only 0.59% lower. These findings indicate that the 36° configuration may provide a favorable compromise between early vegetation establishment and photovoltaic electricity generation among the tested scenarios. By linking renewable-energy production with microenvironment regulation and early vegetation establishment, the proposed framework provides a decision basis for the multifunctional and sustainable reuse of degraded industrial land. Nevertheless, the results represent a site-specific, single-season assessment and should not be interpreted as a universal optimum.
- Open Access
Study on Load Characteristics and Fatigue Life of a Distributed Pitch Wind Turbine Under Turbulent Wind Conditions
Loading fluctuations and fatigue-related structural demand under turbulent wind conditions are important factors that limit the reliability of small wind turbines. This study investigates the separate effects of turbulence intensity and pitch angle on a 5 kW distributed variable-pitch wind turbine prototype using an OpenFAST-based aeroelastic model validated against field measurements. Under the adopted simulation setup and selected operating conditions, increasing turbulence intensity from 5% to 20% leads to a pronounced increase in the extreme blade-root flapwise bending moment and a substantial reduction in the estimated comparative fatigue life. The analysis also reveals a clear trade-off between aerodynamic efficiency and structural durability: among the tested pitch settings, the 6° case yields the highest power output, but also exhibits the largest load fluctuations and the shortest estimated comparative fatigue life. Adjusting the pitch angle to 0° or 12°, while reducing power to some extent, alleviates fatigue-related structural demand and increases the estimated comparative fatigue life. Overall, the results provide a validated prototype-level comparative assessment of how turbulence intensity and pitch angle influence aerodynamic performance, structural response, and fatigue-related demand in the studied turbine. Because the present work focuses on one prototype and does not include cross-turbine comparison or a full stochastic convergence study, the reported quantitative results should not be interpreted as directly generalizable to other turbine configurations. These findings may nevertheless provide a useful basis for future studies on load-aware pitch regulation under turbulent inflow.
Open AccessStudy on Load Characteristics and Fatigue Life of a Distributed Pitch Wind Turbine Under Turbulent Wind Conditions
Loading fluctuations and fatigue-related structural demand under turbulent wind conditions are important factors that limit the reliability of small wind turbines. This study investigates the separate effects of turbulence intensity and pitch angle on a 5 kW distributed variable-pitch wind turbine prototype using an OpenFAST-based aeroelastic model validated against field measurements. Under the adopted simulation setup and selected operating conditions, increasing turbulence intensity from 5% to 20% leads to a pronounced increase in the extreme blade-root flapwise bending moment and a substantial reduction in the estimated comparative fatigue life. The analysis also reveals a clear trade-off between aerodynamic efficiency and structural durability: among the tested pitch settings, the 6° case yields the highest power output, but also exhibits the largest load fluctuations and the shortest estimated comparative fatigue life. Adjusting the pitch angle to 0° or 12°, while reducing power to some extent, alleviates fatigue-related structural demand and increases the estimated comparative fatigue life. Overall, the results provide a validated prototype-level comparative assessment of how turbulence intensity and pitch angle influence aerodynamic performance, structural response, and fatigue-related demand in the studied turbine. Because the present work focuses on one prototype and does not include cross-turbine comparison or a full stochastic convergence study, the reported quantitative results should not be interpreted as directly generalizable to other turbine configurations. These findings may nevertheless provide a useful basis for future studies on load-aware pitch regulation under turbulent inflow.
- Open Access
Load-Predictive Pitch Control Strategy for Wind Turbines Under Turbulent Wind Conditions Based on Long Short-Term Memory Neural Networks
Under turbulent wind conditions, rapid wind speed fluctuations can markedly increase the fatigue loads borne by wind turbine blades and towers. In practice, conventional PID pitch control based on speed feedback often struggles to deliver satisfactory load mitigation, mainly because the wind turbine system is highly nonlinear, strongly coupled, and subject to time-delay effects. To overcome these limitations, this paper proposes a load-predictive pitch control strategy built on a Long Short-Term Memory (LSTM) network. Specifically, the LSTM model is first employed to predict the hub-fixed tilt and yaw moments ahead of time. These predicted values are then introduced as feedforward signals and combined with the conventional speed-based pitch control signal as well as a proportional feedback term. After that, the inverse Coleman transformation is used to generate the individual pitch commands for each blade. To verify the effectiveness of the proposed method, co-simulations were carried out in FAST and MATLAB/Simulink on a 5000 KW distributed pitch-controlled wind turbine under IEC Kaimal spectrum wind conditions, with a mean wind speed of 18 m/s and Class B turbulence intensity. The results show that the LSTM prediction model achieves an R² of 0.998 on the test dataset, with an RMSE as low as 0.0051. Compared with the conventional pitch-based power control strategy, the proposed approach maintains the same average power output while significantly reducing fatigue loads, thereby contributing to a longer service life for the wind turbine.
Open AccessLoad-Predictive Pitch Control Strategy for Wind Turbines Under Turbulent Wind Conditions Based on Long Short-Term Memory Neural Networks
Under turbulent wind conditions, rapid wind speed fluctuations can markedly increase the fatigue loads borne by wind turbine blades and towers. In practice, conventional PID pitch control based on speed feedback often struggles to deliver satisfactory load mitigation, mainly because the wind turbine system is highly nonlinear, strongly coupled, and subject to time-delay effects. To overcome these limitations, this paper proposes a load-predictive pitch control strategy built on a Long Short-Term Memory (LSTM) network. Specifically, the LSTM model is first employed to predict the hub-fixed tilt and yaw moments ahead of time. These predicted values are then introduced as feedforward signals and combined with the conventional speed-based pitch control signal as well as a proportional feedback term. After that, the inverse Coleman transformation is used to generate the individual pitch commands for each blade. To verify the effectiveness of the proposed method, co-simulations were carried out in FAST and MATLAB/Simulink on a 5000 KW distributed pitch-controlled wind turbine under IEC Kaimal spectrum wind conditions, with a mean wind speed of 18 m/s and Class B turbulence intensity. The results show that the LSTM prediction model achieves an R² of 0.998 on the test dataset, with an RMSE as low as 0.0051. Compared with the conventional pitch-based power control strategy, the proposed approach maintains the same average power output while significantly reducing fatigue loads, thereby contributing to a longer service life for the wind turbine.