Jiahao Wu
Jiahao Wu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Chuan Zhang
CNNC Hexin Information Technology (Beijing) Co., Ltd., Beijing 100091, China
2 shared publications - Fengjuan Chen
College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China
2 shared publications - Haowen Sun
College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China
2 shared publications - Tong Wu
CNNC Hexin Information Technology (Beijing) Co., Ltd., Beijing 100091, China
2 shared publications - Xiaofeng Zhang
College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China
2 shared publications - Xiaoqing Zhu
Beijing University of Technology
2 shared publications
Latest Publications
- Open Access
A Study on Thin-Film Dispersion Interference Spectral Measurement by Integrating Deep Learning and Physical Model Fitting
In the context of the increasing demands of precision manufacturing and nanotechnology, especially for emerging fields such as Oxide oxide films in Nuclear nuclear fuel assemblies, the measurement of multi-layer inhomogeneous thin films faces significant challenges. Traditional spectroscopic interference thickness measurement techniques have limitations in handling dispersion interference, parameter coupling, and the efficient solution of nonlinear inverse problems. This study proposes a new model that integrates deep learning and physical model fitting. It constructs a theoretical model of multi-layer thin-film interference spectroscopy based on the Lorentz–Drude formula, uses a generative adversarial network (GAN) for initial structure analysis, and builds a two-layer optimization framework of “deep learning rough positioning—physical model fine fitting”. The research aims to break through the limitations of traditional methods, improve measurement accuracy and anti-noise ability, and provide a key technical support for emerging fields.
Open AccessA Study on Thin-Film Dispersion Interference Spectral Measurement by Integrating Deep Learning and Physical Model Fitting
In the context of the increasing demands of precision manufacturing and nanotechnology, especially for emerging fields such as Oxide oxide films in Nuclear nuclear fuel assemblies, the measurement of multi-layer inhomogeneous thin films faces significant challenges. Traditional spectroscopic interference thickness measurement techniques have limitations in handling dispersion interference, parameter coupling, and the efficient solution of nonlinear inverse problems. This study proposes a new model that integrates deep learning and physical model fitting. It constructs a theoretical model of multi-layer thin-film interference spectroscopy based on the Lorentz–Drude formula, uses a generative adversarial network (GAN) for initial structure analysis, and builds a two-layer optimization framework of “deep learning rough positioning—physical model fine fitting”. The research aims to break through the limitations of traditional methods, improve measurement accuracy and anti-noise ability, and provide a key technical support for emerging fields.
- Open Access
Energy-Oriented Multi-Robot Collaborative Exploration and Mapping for Nuclear Power Plant Operation and Maintenance Based on I-WFD-Gmapping-DT
During the transition of global energy systems toward low-carbon and high-reliability operation, nuclear power plant (NPP) operation and maintenance require environmental perception methods that are safe, energy-efficient, and sufficiently accurate for confined and radiation-risk areas. To address these requirements, this paper proposes an energy-oriented multi-robot collaborative exploration and mapping framework, termed I-WFD-Gmapping-DT. The framework integrates a digital twin (DT) 5+3 model, improved wavefront frontier detection (I-WFD), energy- and risk-aware task allocation, EKF-AMCL-based initial relative pose estimation, and multi-scale Gmapping map fusion. Unlike conventional frontier-based or single-objective exploration methods, the proposed utility function jointly considers discounted information gain, obstacle-sensitive path cost, estimated battery energy, angular dispersion, and safety constraints. A ROS-Gazebo simulation of an NPP-like environment was used for 30 independent runs with randomized seeds and starting perturbations. Compared with WFD-Gmapping, the proposed method increased the three-robot coverage area percentage from 35.6 ± 2.1% to 40.5 ± 1.9%, reduced exploration time by 13.35%, reduced total and used frontier target points by 38.9% and 23.24%, respectively, and reduced estimated energy consumption by 13.9%. Map accuracy was also improved, with AE decreasing from 12.45% to 11.52%, RMSE from 7.85% to 7.18%, and SSIM increasing from 0.78 to 0.83. Additional sensitivity, ablation, runtime, and initial-pose experiments confirm the robustness of the parameter selection and the contribution of the DT-enabled feedback mechanism. The results show that I-WFD-Gmapping-DT can enhance collaborative inspection efficiency, reduce redundant motion and energy consumption, and provide reliable mapping support for intelligent NPP operation and maintenance.
Open AccessEnergy-Oriented Multi-Robot Collaborative Exploration and Mapping for Nuclear Power Plant Operation and Maintenance Based on I-WFD-Gmapping-DT
During the transition of global energy systems toward low-carbon and high-reliability operation, nuclear power plant (NPP) operation and maintenance require environmental perception methods that are safe, energy-efficient, and sufficiently accurate for confined and radiation-risk areas. To address these requirements, this paper proposes an energy-oriented multi-robot collaborative exploration and mapping framework, termed I-WFD-Gmapping-DT. The framework integrates a digital twin (DT) 5+3 model, improved wavefront frontier detection (I-WFD), energy- and risk-aware task allocation, EKF-AMCL-based initial relative pose estimation, and multi-scale Gmapping map fusion. Unlike conventional frontier-based or single-objective exploration methods, the proposed utility function jointly considers discounted information gain, obstacle-sensitive path cost, estimated battery energy, angular dispersion, and safety constraints. A ROS-Gazebo simulation of an NPP-like environment was used for 30 independent runs with randomized seeds and starting perturbations. Compared with WFD-Gmapping, the proposed method increased the three-robot coverage area percentage from 35.6 ± 2.1% to 40.5 ± 1.9%, reduced exploration time by 13.35%, reduced total and used frontier target points by 38.9% and 23.24%, respectively, and reduced estimated energy consumption by 13.9%. Map accuracy was also improved, with AE decreasing from 12.45% to 11.52%, RMSE from 7.85% to 7.18%, and SSIM increasing from 0.78 to 0.83. Additional sensitivity, ablation, runtime, and initial-pose experiments confirm the robustness of the parameter selection and the contribution of the DT-enabled feedback mechanism. The results show that I-WFD-Gmapping-DT can enhance collaborative inspection efficiency, reduce redundant motion and energy consumption, and provide reliable mapping support for intelligent NPP operation and maintenance.
- Open Access
- 27 April 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (5) , 337
A Path Optimization Simulation Method for Nuclear Power Plant Inspection and Maintenance Robots Based on the Integration of Bi-RRT and APF
Path planning for inspection and maintenance robots in nuclear power plants often suffers from limited adaptability, high computational cost, and unstable convergence in obstacle-dense confined environments. To address these issues, this paper proposes an improved Bi-RRT–APF path optimization framework for complex industrial scenarios. The method integrates (1) a hybrid sampling strategy combining random, goal-biased, and potential-field-guided sampling to enhance global exploration and convergence efficiency; (2) a potential-field-guided perturbation and stagnation detection mechanism to improve escape capability from local minima; and (3) a dynamic target switching and constrained segmented connection strategy to improve path feasibility and safety. A digital twin-based simulation platform is further developed to validate the engineering applicability of the proposed approach. Simulation results demonstrate significant quantitative improvements over baseline methods. Compared with conventional RRT and Bi-RRT, the proposed method reduces iteration count by 65.3% and 43.8%, respectively, and decreases computation time by 76.1% and 48.4%, respectively, while increasing the success rate to 95% (from 82% and 93%) and improving path smoothness (reduced from 5.3 and 3.3 to 2.9). Compared with advanced variants (Quad-RRT and KB-RRT*), the method further reduces computation time by 25.2% and 10.3% and iteration count by 29.3% and 8.4%, respectively. These results indicate that the proposed method achieves a balanced improvement in efficiency, robustness, and path quality. This work provides an efficient and reliable solution for autonomous path planning of robots in complex nuclear power plant environments.
- 27 April 2026
- Published by MDPI AG in Algorithms
- Vol. 19 (5) , 337
Open AccessA Path Optimization Simulation Method for Nuclear Power Plant Inspection and Maintenance Robots Based on the Integration of Bi-RRT and APF
Path planning for inspection and maintenance robots in nuclear power plants often suffers from limited adaptability, high computational cost, and unstable convergence in obstacle-dense confined environments. To address these issues, this paper proposes an improved Bi-RRT–APF path optimization framework for complex industrial scenarios. The method integrates (1) a hybrid sampling strategy combining random, goal-biased, and potential-field-guided sampling to enhance global exploration and convergence efficiency; (2) a potential-field-guided perturbation and stagnation detection mechanism to improve escape capability from local minima; and (3) a dynamic target switching and constrained segmented connection strategy to improve path feasibility and safety. A digital twin-based simulation platform is further developed to validate the engineering applicability of the proposed approach. Simulation results demonstrate significant quantitative improvements over baseline methods. Compared with conventional RRT and Bi-RRT, the proposed method reduces iteration count by 65.3% and 43.8%, respectively, and decreases computation time by 76.1% and 48.4%, respectively, while increasing the success rate to 95% (from 82% and 93%) and improving path smoothness (reduced from 5.3 and 3.3 to 2.9). Compared with advanced variants (Quad-RRT and KB-RRT*), the method further reduces computation time by 25.2% and 10.3% and iteration count by 29.3% and 8.4%, respectively. These results indicate that the proposed method achieves a balanced improvement in efficiency, robustness, and path quality. This work provides an efficient and reliable solution for autonomous path planning of robots in complex nuclear power plant environments.