German Michel Guzman-Acevedo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
German Michel Guzman-Acevedo has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Juan Antonio Quintana-Rodríguez
Department of Vehicle Engineering and Structural Integrity, Mexican Institute of Transportation, San Fandila 76703, Mexico
5 shared publications - José Ramón Gaxiola Camacho
Department of Civil Engineering, Autonomous University of Sinaloa, Culiacán 80040, Mexico
4 shared publications - Jesus Guadalupe Monjardin-Quevedo
Department of Earth and Space Sciences, Autonomous University of Sinaloa, Culiacán 80040, Mexico
3 shared publications - Limbert Vega-Gonzalez
Department of Civil Engineering, Autonomous University of Sinaloa, Culiacán 80040, Mexico
3 shared publications - Luis Alvaro Martinez-Trujano
Group of Structural Health Monitoring, Department of Vehicle Engineering and Structural Integrity, Mexican Institute of Transportation, San Fandila 76703, Mexico
3 shared publications - Francisco Javier Carrión-Viramontes
Instituto Mexicano del Transporte
2 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (10) , 355
Assessing Regional Land Subsidence Exposure and Geohazard Susceptibility Along the Mexico-Toluca Intercity Railway: An SBAS-InSAR Analysis
This study assesses ground subsidence and surface angular distortion along the Lerma–Zinacantepec segment of the Mexico-Toluca Intercity Railway. A multitemporal Interferometric Synthetic Aperture Radar (InSAR) framework using the Short Baseline Subset (SBAS) algorithm processed Sentinel-1 imagery (2022–2024), validated against the MXTO Global Navigation Satellite Systems (GNSS) station ( of 0.86 and 0.80 for descending and ascending tracks, respectively). Kinematic vector decomposition revealed a mean vertical ground subsidence rate of −2 cm/year. To evaluate geohazard susceptibility, angular distortion was computed from these decomposed vertical displacements using a fixed 160 m spatial baseline. By explicitly integrating intrinsic InSAR measurement uncertainty into the classification, localized steep gradients initially flagged by mathematical models were discarded as statistically negligible artifacts. Consequently, results show widespread ground stability, with the evaluated 16-km segment falling within low-risk thresholds. Corroborating this, in-situ visual inspections revealed no structural damage induced by differential subsidence. Due to Sentinel-1 pixel-mixing limitations, the measured signals represent ground subsidence rather than direct structural deformation. Future monitoring should integrate higher-resolution SAR sensors or localized structural health instrumentation to isolate the behavior of the railway superstructure from regional subsidence.- 1 October 2026
- Published by MDPI AG in Infrastructures
- Vol. 11 (10) , 355
Open AccessAssessing Regional Land Subsidence Exposure and Geohazard Susceptibility Along the Mexico-Toluca Intercity Railway: An SBAS-InSAR Analysis
This study assesses ground subsidence and surface angular distortion along the Lerma–Zinacantepec segment of the Mexico-Toluca Intercity Railway. A multitemporal Interferometric Synthetic Aperture Radar (InSAR) framework using the Short Baseline Subset (SBAS) algorithm processed Sentinel-1 imagery (2022–2024), validated against the MXTO Global Navigation Satellite Systems (GNSS) station ( of 0.86 and 0.80 for descending and ascending tracks, respectively). Kinematic vector decomposition revealed a mean vertical ground subsidence rate of −2 cm/year. To evaluate geohazard susceptibility, angular distortion was computed from these decomposed vertical displacements using a fixed 160 m spatial baseline. By explicitly integrating intrinsic InSAR measurement uncertainty into the classification, localized steep gradients initially flagged by mathematical models were discarded as statistically negligible artifacts. Consequently, results show widespread ground stability, with the evaluated 16-km segment falling within low-risk thresholds. Corroborating this, in-situ visual inspections revealed no structural damage induced by differential subsidence. Due to Sentinel-1 pixel-mixing limitations, the measured signals represent ground subsidence rather than direct structural deformation. Future monitoring should integrate higher-resolution SAR sensors or localized structural health instrumentation to isolate the behavior of the railway superstructure from regional subsidence. - Open Access
Structural Performance Assessment of the Miguel Hidalgo Bridge Based on AASHTO Provisions
Existing bridges represent a significant challenge for structural engineering due to aging, increased traffic demands, and lack of original design information. This paper presents an investigation of the structural behavior of the Miguel Hidalgo Bridge, located in Culiacán, Sinaloa, México, which has remained in service for over a century. A preliminary visual inspection identified deterioration mechanisms, including cracking, exposed reinforcement, damaged bearings, and localized structural deformations. Given the absence of original design documentation, a structural health monitoring (SHM) strategy was implemented to assess its condition. The SHM methodology integrates field instrumentation using accelerometers for operational modal analysis under ambient vibration and GPS receivers for displacement measurements, complemented by a geometric survey and material characterization through non-destructive techniques. These data were used to develop and calibrate a three-dimensional finite element (FE) model, which was employed to evaluate structural performance under service loads in accordance with AASHTO provisions. Results indicate that the bridge satisfies serviceability criteria; however, certain components exhibit deficiencies in load-carrying capacity. These findings highlight the importance of integrating monitoring data with numerical modeling to support decision-making related to maintenance, rehabilitation, and extension of service life in existing bridge infrastructure.
Open AccessStructural Performance Assessment of the Miguel Hidalgo Bridge Based on AASHTO Provisions
Existing bridges represent a significant challenge for structural engineering due to aging, increased traffic demands, and lack of original design information. This paper presents an investigation of the structural behavior of the Miguel Hidalgo Bridge, located in Culiacán, Sinaloa, México, which has remained in service for over a century. A preliminary visual inspection identified deterioration mechanisms, including cracking, exposed reinforcement, damaged bearings, and localized structural deformations. Given the absence of original design documentation, a structural health monitoring (SHM) strategy was implemented to assess its condition. The SHM methodology integrates field instrumentation using accelerometers for operational modal analysis under ambient vibration and GPS receivers for displacement measurements, complemented by a geometric survey and material characterization through non-destructive techniques. These data were used to develop and calibrate a three-dimensional finite element (FE) model, which was employed to evaluate structural performance under service loads in accordance with AASHTO provisions. Results indicate that the bridge satisfies serviceability criteria; however, certain components exhibit deficiencies in load-carrying capacity. These findings highlight the importance of integrating monitoring data with numerical modeling to support decision-making related to maintenance, rehabilitation, and extension of service life in existing bridge infrastructure.
- Open Access
- 21 July 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Structural risk evaluation of airports using satellite InSAR measurements provided by the OPERA platform
- 21 July 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessStructural risk evaluation of airports using satellite InSAR measurements provided by the OPERA platform
- 27 April 2026
- Published by American Society of Civil Engineers (ASCE)
- p. 133-144
InSAR: An Emerging Technology for Structural Health Monitoring of Bridges
In this paper, a practical application of Interferometric Synthetic Aperture Radar (InSAR) technology is implemented in the structural health monitoring (SHM) of bridges. The structural performance and risk assessment of the El Carrizo Bridge, a cable-stayed bridge that suffered severe structural damage due to a vehicular accident back in 2018, are presented. The structure is characterized by a total length of 487 m and a main span of approximately 218 m. The bridge's displacements were monitored using satellite-based InSAR technology. Then, time-series displacement data were analyzed to interpret the structural response during the post-rehabilitation period. Finally, the results indicate that the bridge currently maintains normal operational performance with no identified risks. In summary, InSAR offers a unique, remote approach to evaluating bridge performance through satellite imagery. This technology represents a cost-effective and non-intrusive alternative to traditional in situ sensors, such as accelerometers, gyroscopes, linear variable differential transformers, and strain gauges, which require physical installation/operation and manual maintenance.
- 27 April 2026
- Published by American Society of Civil Engineers (ASCE)
- p. 133-144
InSAR: An Emerging Technology for Structural Health Monitoring of Bridges
In this paper, a practical application of Interferometric Synthetic Aperture Radar (InSAR) technology is implemented in the structural health monitoring (SHM) of bridges. The structural performance and risk assessment of the El Carrizo Bridge, a cable-stayed bridge that suffered severe structural damage due to a vehicular accident back in 2018, are presented. The structure is characterized by a total length of 487 m and a main span of approximately 218 m. The bridge's displacements were monitored using satellite-based InSAR technology. Then, time-series displacement data were analyzed to interpret the structural response during the post-rehabilitation period. Finally, the results indicate that the bridge currently maintains normal operational performance with no identified risks. In summary, InSAR offers a unique, remote approach to evaluating bridge performance through satellite imagery. This technology represents a cost-effective and non-intrusive alternative to traditional in situ sensors, such as accelerometers, gyroscopes, linear variable differential transformers, and strain gauges, which require physical installation/operation and manual maintenance.
- Open Access
Tension Force Estimation of Cable-Stayed Bridges Based on Computer Vision Without the Need for Direct Measurement of Mechanical Parameters of the Cables
Commonly, accelerometers are used to determine the tension force in cables through an indirect process; however, it is necessary to know the mechanical parameters of each element, such as mass and length. Typically, obtaining or measuring these parameters is not feasible. Therefore, this research proposed an alternative methodology to indirectly estimate them based on historical information about the so-called classic instruments (accelerometers and hydraulic jack). This case study focused on the Rio Papaloapan Bridge located in Veracruz, Mexico, a structure that has experienced material casting issues due to inadequate heat treatment in some cable top anchor over its lifespan. Thirteen cables from the structure were selected to evaluate the proposed methodology, yielding results within 3.8% of difference compared to direct tension estimation generated by a hydraulic jack. Furthermore, to enhance data collection, this process was complemented using a computer vision methodology. This involved remotely measuring the vibration frequency of cables from high-resolution videos recorded with a smartphone. The non-contact method was validated in a laboratory using a vibrating table, successfully estimating oscillation frequencies from video-recording with a fixed camera. A field test on eight cables of a bridge was also conducted to assess the performance and feasibility of the proposed method. The results demonstrated an RMS Error of approximately 2 mHz and a percentage difference in the tension force estimation below 3% compared to an accelerometer measurement approach. Finally, it was determined that this composed methodology for indirect tension force determination is a viable option when: (1) cables are challenging to access; (2) there is no line of sight between the camera and cables outside the bridge; (3) there is a lack of information about the mechanical parameters of the cables.
Open AccessTension Force Estimation of Cable-Stayed Bridges Based on Computer Vision Without the Need for Direct Measurement of Mechanical Parameters of the Cables
Commonly, accelerometers are used to determine the tension force in cables through an indirect process; however, it is necessary to know the mechanical parameters of each element, such as mass and length. Typically, obtaining or measuring these parameters is not feasible. Therefore, this research proposed an alternative methodology to indirectly estimate them based on historical information about the so-called classic instruments (accelerometers and hydraulic jack). This case study focused on the Rio Papaloapan Bridge located in Veracruz, Mexico, a structure that has experienced material casting issues due to inadequate heat treatment in some cable top anchor over its lifespan. Thirteen cables from the structure were selected to evaluate the proposed methodology, yielding results within 3.8% of difference compared to direct tension estimation generated by a hydraulic jack. Furthermore, to enhance data collection, this process was complemented using a computer vision methodology. This involved remotely measuring the vibration frequency of cables from high-resolution videos recorded with a smartphone. The non-contact method was validated in a laboratory using a vibrating table, successfully estimating oscillation frequencies from video-recording with a fixed camera. A field test on eight cables of a bridge was also conducted to assess the performance and feasibility of the proposed method. The results demonstrated an RMS Error of approximately 2 mHz and a percentage difference in the tension force estimation below 3% compared to an accelerometer measurement approach. Finally, it was determined that this composed methodology for indirect tension force determination is a viable option when: (1) cables are challenging to access; (2) there is no line of sight between the camera and cables outside the bridge; (3) there is a lack of information about the mechanical parameters of the cables.
- Open Access
- 4 December 2023
- Published by MDPI AG in Infrastructures
- Vol. 8 (12) , 173
The Structural Reliability of the Usumacinta Bridge Using InSAR Time Series of Semi-Static Displacements
In recent years, Interferometric Synthetic Aperture Radar (InSAR) technology has been able to determine the semi-static behavior of bridges. However, most of the research about the use of InSAR in the monitoring of bridges has been applied only in deterministic assessments of their performance. Therefore, in the current manuscript, the Usumacinta Bridge, located in Mexico, was evaluated based on a probabilistic methodology to define structural reliability using images from Sentinel-1. In addition, a controlled experiment was developed using a corner reflector (CR) to evaluate the capabilities of InSAR for determining vertical displacements. In the trial, the CR was designed, oriented, and implemented, finding discrepancies concerning leveling of less than 2 mm. On the other hand, the case of the alternative probabilistic approach integrates the reliability of structures theory and probability density functions (PDFs) of displacements obtained via InSAR technology. In summary, the proposed study focused on the analysis of two years of vertical displacements and monthly velocities; then, implementing the alternative probabilistic approach, the reliability index (β) and probability of risk (PR) of the bridge were extracted, respectively. Based on the results of the experimental part of the paper, the displacements indicated maximum and minimum values of reliability index of 8.1 and 3.4, respectively. Within this context, the mean and standard deviation obtained were 5.9 and 1.4, respectively. On the other hand, the monthly velocities showed a maximum probability of risk of 2.61%, minimum value of 1.5 × 10−5%, mean of 0.4%, and standard deviation of 0.8%. Hence, the above-documented results indicate that the Usumacinta Bridge did not suffer any damage during its overloading condition period.
- 4 December 2023
- Published by MDPI AG in Infrastructures
- Vol. 8 (12) , 173
Open AccessThe Structural Reliability of the Usumacinta Bridge Using InSAR Time Series of Semi-Static Displacements
In recent years, Interferometric Synthetic Aperture Radar (InSAR) technology has been able to determine the semi-static behavior of bridges. However, most of the research about the use of InSAR in the monitoring of bridges has been applied only in deterministic assessments of their performance. Therefore, in the current manuscript, the Usumacinta Bridge, located in Mexico, was evaluated based on a probabilistic methodology to define structural reliability using images from Sentinel-1. In addition, a controlled experiment was developed using a corner reflector (CR) to evaluate the capabilities of InSAR for determining vertical displacements. In the trial, the CR was designed, oriented, and implemented, finding discrepancies concerning leveling of less than 2 mm. On the other hand, the case of the alternative probabilistic approach integrates the reliability of structures theory and probability density functions (PDFs) of displacements obtained via InSAR technology. In summary, the proposed study focused on the analysis of two years of vertical displacements and monthly velocities; then, implementing the alternative probabilistic approach, the reliability index (β) and probability of risk (PR) of the bridge were extracted, respectively. Based on the results of the experimental part of the paper, the displacements indicated maximum and minimum values of reliability index of 8.1 and 3.4, respectively. Within this context, the mean and standard deviation obtained were 5.9 and 1.4, respectively. On the other hand, the monthly velocities showed a maximum probability of risk of 2.61%, minimum value of 1.5 × 10−5%, mean of 0.4%, and standard deviation of 0.8%. Hence, the above-documented results indicate that the Usumacinta Bridge did not suffer any damage during its overloading condition period.
- Top Cited PapersOpen Access
- 24 October 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (11) , 319
Ionospheric Total Electron Content (TEC) Anomalies as Earthquake Precursors: Unveiling the Geophysical Connection Leading to the 2023 Moroccan 6.8 Mw Earthquake
The study delves into the relationship between ionospheric total electron content (TEC) anomalies and seismic activity, with a focus on Morocco’s 6.8 Mw earthquake on 8 September 2023, lying within a tectonically active region at the convergence of the African and Eurasian Plates. To enhance the reliability of our findings, we incorporate space weather conditions, utilizing indices (Dst, Kp, and F10.7) to pinpoint periods of stable space weather. This minimizes the possibility of erroneously attributing natural ionospheric fluctuations to seismic events. Notably, our TEC analysis unveils positive and negative anomalies, with some occurring up to a week before the earthquake. These anomalies, exceeding predefined thresholds, provide compelling evidence of significant deviations from typical ionospheric conditions. Spatial mapping techniques employing both station-specific vTEC data and pseudorandom noise codes (PRNs) from multiple global navigation satellite system (GNSS) stations highlight a strong correlation between ionospheric anomalies and the earthquake’s epicenter. The integration of PRNs enhances coverage and sensitivity to subtle anomalies. Additionally, the analysis of satellite imagery and ground displacement data using Sentinel-1 confirms significant ground uplift of approximately 15 cm following the earthquake, shedding light on surface responses to seismic events. These findings underscore the potential of ionospheric science in advancing earthquake early warning systems and deepening our understanding of earthquake precursors, thus contributing to the mitigation of seismic event impacts and the protection of lives and infrastructure.
- 24 October 2023
- Published by MDPI AG in Geosciences
- Vol. 13 (11) , 319
Top Cited PapersOpen AccessIonospheric Total Electron Content (TEC) Anomalies as Earthquake Precursors: Unveiling the Geophysical Connection Leading to the 2023 Moroccan 6.8 Mw Earthquake
The study delves into the relationship between ionospheric total electron content (TEC) anomalies and seismic activity, with a focus on Morocco’s 6.8 Mw earthquake on 8 September 2023, lying within a tectonically active region at the convergence of the African and Eurasian Plates. To enhance the reliability of our findings, we incorporate space weather conditions, utilizing indices (Dst, Kp, and F10.7) to pinpoint periods of stable space weather. This minimizes the possibility of erroneously attributing natural ionospheric fluctuations to seismic events. Notably, our TEC analysis unveils positive and negative anomalies, with some occurring up to a week before the earthquake. These anomalies, exceeding predefined thresholds, provide compelling evidence of significant deviations from typical ionospheric conditions. Spatial mapping techniques employing both station-specific vTEC data and pseudorandom noise codes (PRNs) from multiple global navigation satellite system (GNSS) stations highlight a strong correlation between ionospheric anomalies and the earthquake’s epicenter. The integration of PRNs enhances coverage and sensitivity to subtle anomalies. Additionally, the analysis of satellite imagery and ground displacement data using Sentinel-1 confirms significant ground uplift of approximately 15 cm following the earthquake, shedding light on surface responses to seismic events. These findings underscore the potential of ionospheric science in advancing earthquake early warning systems and deepening our understanding of earthquake precursors, thus contributing to the mitigation of seismic event impacts and the protection of lives and infrastructure.