AEAntonija Ereš

Antonija Ereš

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Antonija Ereš has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance and Resource Efficiency of Crushed Brick Aggregate in Micro-Concrete

    by Antonija Ereš, Josip Radić, Dalibor Kramarić, Marijana Hadzima-Nyarko, Ivanka Netinger Grubeša

    The construction sector relies heavily on virgin mineral resources and produces significant quantities of construction and demolition waste. This study examines crushed brick aggregate (CBA) as a volumetric substitute for natural river sand in micro-concrete at replacement levels of 0%, 25%, 50%, 75%, and 100%. Results show that increasing CBA content decreases consistency and flexural strength while increasing water absorption. However, compressive strength is maintained even at full replacement. One-way ANOVA demonstrated significant overall effects of CBA replacement level on all investigated properties. However, Tukey’s HSD comparisons indicated that not all adjacent replacement levels exhibited significant differences. Specifically, compressive strength at 25% and 50% replacement did not differ significantly from the reference mixture. A nominal resource-efficiency assessment based on the absolute-volume method and literature-derived density values indicates that, at 25% volumetric replacement, the mixture incorporates approximately 286.7 kg/m3 of CBA and saves 362.4 kg/m3 of natural sand while retaining 94.3% of the reference compressive strength. For Croatia’s estimated 8882 t of waste bricks in 2024, a maximum yield scenario suggests production of about 30,985 m3 of this mixture and natural sand savings of approximately 11,231 t. The 25% replacement level offers the most balanced outcome in terms of secondary resource utilisation, consistency, mechanical performance, and water absorption.

  • Mechanical Performance of Mortars with Biomass Ash

    by Josip Radić, Antonija Ereš, Ana Hlebec, Ivanka Netinger Grubeša, Marijana Hadzima-Nyarko

    The use of alternative materials in cement-based composites is encouraged to reduce cement consumption and environmental waste. In this context, biomass ash can be considered a sustainable advanced material for partial or full replacement of cement; however, further research is needed to determine its effect on the mortar’s mechanical performance. This study examines the effects of replacing cement, both completely (as a precursor in geopolymers) and partially, with biomass ash on the mechanical properties. Along with geopolymer mortars using biomass ash as the main binder, activated by alkaline solutions, a reference mortar containing 100% cement and a combination with 50% volumetric cement replacement were prepared. Tests for flexural and compressive strength of such mortars were performed. Even though the ash’s pozzolanic activity index was only 27%, which is below the required 80%, and its flexural strength declined as its ash content increased, mortars containing up to 25% biomass ash as a binder were strong enough to be used in seismically active areas for masonry construction. Additionally, the ash showed outstanding alkaline activation capability, confirming its potential as an advanced binder material. The material’s feasibility as a sustainable alternative binder was confirmed when alkali- activated mortars cured at room temperature attained compressive strengths sufficient for masonry applications in seismic regions.


  • Open Access

    Comparative Analysis of Target Displacement Demands in Regular Reinforced Concrete Frames Under Different Seismic Design Codes

    by Ercan Işık, Josip Radić, Antonija Ereš, Marijana Hadzima-Nyarko

    This study presents a comparative investigation of target displacement demands, a fundamental indicator in the seismic performance assessment of reinforced concrete frame systems, within the framework of the Turkish Building Earthquake Code (TBEC-2018), American standards (ASCE 41), and European standards (Eurocode 8). To analyse the consistency in performance levels stipulated by different structural design codes, critical variables, including soil class, number of stories, concrete grade, frame span, and soft story at ground level, were parametrically defined. The impact of these variables on the target displacement demands of the structures was examined through a comparative lens. Nonlinear static pushover analyses based on fiber-based modelling were conducted using SeismoStruct software to determine displacement demands under different seismic code formulations across six distinct variables. The displacements obtained for each variable at identical seismic ground-motion levels were evaluated individually. Analytical results reveal that soil degradation significantly increases target displacements across all codes. At the same time, the presence of a high story affects structural ductility and displacement demands, with varying sensitivities across the codes. Notably, it was observed that TBEC-2018 yields more conservative displacement demands in certain spectral regions than those in ASCE 41 and Eurocode 8. The findings provide critical data for understanding the disparities in safety margins among international seismic design standards.

  • Reliability of fundamental period estimation for condition assessment and seismic evaluation of RC structures

    by Josip Radić, Antonija Ereš, Ivan Bandalo, Marijana Hadzima-Nyarko

    The fundamental vibration period is a key global dynamic parameter for characterizing the structural response and condition of existing reinforced concrete buildings. Its reliable estimation is particularly important because changes in structural stiffness, damage, nonstructural components, and other building characteristics can significantly affect the dynamic properties of a structure. This study evaluates the reliability of commonly used expressions for estimating the fundamental period of RC buildings, including formulations prescribed by international seismic design codes and empirical models proposed in the literature. A database of experimentally measured fundamental periods of existing RC buildings is used as a reference for evaluating the predictive performance of the selected expressions. The comparison reveals considerable discrepancies between experimentally identified and empirically estimated periods, with simplified formulations frequently resulting in overestimation or underestimation of the actual dynamic response. The results indicate that expressions based primarily on building height may not adequately represent the influence of structural configuration, nonstructural elements, local construction characteristics, and structural condition. These findings highlight the importance of experimentally informed fundamental period estimation for reliable condition assessment and seismic evaluation of existing RC structures and emphasize the need for models that better account for parameters affecting their actual dynamic behavior.