Liran Katz
Research Subjects
Liran Katz has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Nick G. J. Helthuis
Production Technology, Department of Mechanics of Solids, Surfaces and Systems, Faculty of Engineering Technology University of Twente Enschede the Netherlands
3 shared publications - I. Joran Geschiere2 shared publications
- Wouter Johannes Bernardus Grouve
University of Twente
2 shared publications I.V. Lazarov
1 shared publicationIvaylo V. Lazarov
1 shared publication- R. Akkerman
University of Twente
1 shared publication
Latest Publications
- Open Access
- 19 September 2026
- Published by Elsevier in Composites Part B: Engineering
- Vol. 329
Laser-induced surface modification of C/PEKK for co-curing with C/epoxy
- 19 September 2026
- Published by Elsevier in Composites Part B: Engineering
- Vol. 329
Open AccessLaser-induced surface modification of C/PEKK for co-curing with C/epoxy
- Open Access
- 18 July 2026
- Published by Elsevier in SSRN Electronic Journal
Laser-induced surface modification of C/PEKK for co-curing with C/epoxy
Co-curing of thermoplastic and thermoset composites offers an attractive integration route for lightweight aircraft structures. However, achieving a durable interface often relies on extensive surface pretreatments and the use of additional bonding materials at the interface. This work explores the use of laser heating to locally modify the surface of a carbon fiber reinforced polyetherketoneketone (C/PEKK) laminate with the aim of enhancing cocuring with a carbon fiber reinforced epoxy. Central to this approach is the formation of an amorphous surface layer that is more susceptible to interdiffusion during co-curing. High-rate differential scanning calorimetry showed that crystallization of PEKK is suppressed for cooling rates exceeding 10 ◦Cs-1. Static spot laser heating achieved cooling rates of 100 ◦Cs-1 to 400 ◦Cs-1, resulting in a locally amorphous surface layer, as confirmed by microscopy and differential scanning calorimetry, along with a minor increase in surface roughness. Laser-treated surfaces were subsequently co-cured with a carbon fiber reinforced epoxy in an autoclave. Energy-dispersive X-ray analysis of cross-sections indicated enhanced interdiffusion across the interface when the thermoplastic surface was rendered amorphous. Mandrel peel testing showed that the treatment resulted in improved interfacial performance compared to an untreated reference and to a surface that was annealed after the laser treatment. Overall, the results demonstrate that laser heating provides a promising route for tailoring thermoplastic composite surfaces prior to co-curing.
- 18 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLaser-induced surface modification of C/PEKK for co-curing with C/epoxy
Co-curing of thermoplastic and thermoset composites offers an attractive integration route for lightweight aircraft structures. However, achieving a durable interface often relies on extensive surface pretreatments and the use of additional bonding materials at the interface. This work explores the use of laser heating to locally modify the surface of a carbon fiber reinforced polyetherketoneketone (C/PEKK) laminate with the aim of enhancing cocuring with a carbon fiber reinforced epoxy. Central to this approach is the formation of an amorphous surface layer that is more susceptible to interdiffusion during co-curing. High-rate differential scanning calorimetry showed that crystallization of PEKK is suppressed for cooling rates exceeding 10 ◦Cs-1. Static spot laser heating achieved cooling rates of 100 ◦Cs-1 to 400 ◦Cs-1, resulting in a locally amorphous surface layer, as confirmed by microscopy and differential scanning calorimetry, along with a minor increase in surface roughness. Laser-treated surfaces were subsequently co-cured with a carbon fiber reinforced epoxy in an autoclave. Energy-dispersive X-ray analysis of cross-sections indicated enhanced interdiffusion across the interface when the thermoplastic surface was rendered amorphous. Mandrel peel testing showed that the treatment resulted in improved interfacial performance compared to an untreated reference and to a surface that was annealed after the laser treatment. Overall, the results demonstrate that laser heating provides a promising route for tailoring thermoplastic composite surfaces prior to co-curing.
- Open Access
- 12 May 2026
- Published by Elsevier in Composites Part B: Engineering
- Vol. 323
Hybrid epoxy-LMPAEK composite co-cured joints: A study on UVO pretreatment and its effect on interlaminar toughness
- 12 May 2026
- Published by Elsevier in Composites Part B: Engineering
- Vol. 323
Open AccessHybrid epoxy-LMPAEK composite co-cured joints: A study on UVO pretreatment and its effect on interlaminar toughness