DVDinh Hoan Vu

Dinh Hoan Vu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dinh Hoan Vu has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Unified Experimentally Constrained PID/LQR Optimization for MRD-Based Semi-Active Suspension Control in Electric Vehicles

    by Minh Hoang Trinh, Bao Viet Le, Dinh Hoan Vu, Trong Duong Do, Dong Nguyen, Tien Dung Nguyen

    The rapid adoption of electric vehicles, together with increased battery mass and altered load distribution, is placing greater demands on ride comfort and suspension adaptability, while controller optimization may still request forces beyond the instantaneous capability of the physical semi-active actuator if experimentally supported force limits are not explicitly enforced. This study proposes a unified experimentally constrained optimization framework for a magnetorheological damper (MRD)-based semi-active suspension system using a two-degree-of-freedom quarter-car model. The damper is characterized at eleven current levels and represented by a branch-dependent lookup model that provides the zero-current baseline and instantaneous feasible force range. Proportional–integral–derivative (PID) and linear quadratic regulator (LQR) controllers are independently tuned using a genetic algorithm (GA) and particle swarm optimization (PSO) under identical vehicle dynamics, objective functions, tuning excitation, and MRD force constraints. Each candidate force demand is projected onto the experimentally derived feasible range throughout optimization. The controllers are tuned on a composite B–C–D profile and subsequently evaluated over nine road–speed scenarios. PID-PSO reduces the RMS sprung-mass acceleration by 15.91% and achieves the best acceleration performance in six cases, whereas LQR-PSO provides more balanced improvements in body motion, suspension travel, tire response, and force feasibility. The proposed framework therefore provides a more physically constrained basis for the comparative design and evaluation of MRD-based semi-active suspension control.

  • Open Access

    Thermo-Hydraulic Optimization of Parallel-Channel Cold Plates Using CFD: A Comparative Study of Cylindrical and Fin-Type Baffles for Battery Thermal Management

    by Tien Dung Nguyen, Dong Nguyen, Trong Duong Do, Dinh Hoan Vu, Yeong-Hwa Chang, Bao Viet Le

    This study proposes two enhanced configurations for a parallel-channel cold plate in battery thermal management systems to improve thermo-hydraulic performance through the introduction of cylindrical and fin-type baffles. A three-dimensional computational fluid dynamics (CFD) model was developed in ANSYS to simulate fluid flow and heat transfer within the cold plate. A Poly-Hexcore meshing strategy with local refinement and near-wall inflation layers was employed to ensure numerical accuracy while maintaining computational efficiency. A parametric investigation involving 150 cases was conducted to identify the optimal channel configuration. The results indicate that, among the investigated configurations and under the present numerical operating conditions, the fin-type baffle exhibits the most balanced thermo-hydraulic behavior by achieving an effective balance between heat-transfer enhancement and pressure-drop penalty. The present study provides a CFD-based framework for the design and optimization of parallel-channel cold plates for battery thermal management applications.