JHJan Hantusch
Jan Hantusch
*This is an algorithmically generated author record based on publicly available information.
Research Subjects
Jan Hantusch has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Ingo Riehl
Professorship of Technical Thermodynamics, Institute of Thermal Engineering, TU Bergakademie Freiberg, Gustav-Zeuner-Str. 7, 09599 Freiberg, Saxony, Germany
1 shared publication - Ravi Govindram Kewalramani
Fakultät für Maschinenbau, Verfahrens- und Energietechnik, TU Bergakademie Freiberg
1 shared publication - Tobias Fieback
Professorship of Technical Thermodynamics, Institute of Thermal Engineering, TU Bergakademie Freiberg, Gustav-Zeuner-Str. 7, 09599 Freiberg, Saxony, Germany
1 shared publication
Latest Publications
- Open Access
A Simplified CFD Framework for Parametric Analysis of the Cooling Stage During Aluminothermic Rail Welding: Rapid Welding Process with Short Preheating
The quality and integrity of aluminothermic rail welds are strongly governed by the thermal conditions involved during preheating, pouring and cooling stages of the process. In this study, a simplified numerical framework is presented, based on the finite volume method and implemented in the open-source software OpenFOAM® version 7, to predict the heat transfer and solidification processes. Within this framework, the preheating stage is simulated by employing a heat flux profile derived from experimental measurements, while the mould filling stage is neglected under the assumption of instantaneous pouring of the molten metal. The steel–slag multiphase system is treated using the Volume of Fluid method, whereas melting and solidification are captured using the enthalpy-porosity approach on a fixed Eulerian grid. The numerical framework is validated for a rapid welding process with short preheating procedure, consistent with typical industrial practice for rail welding. The predicted temperature histories during the preheating stage show sufficiently good agreement with the experimental measurements. Subsequently, the cooling stage is validated for a molten metal temperature of 2200 (≈2473 K). The predicted width of the fusion zone is compared with experimental data, showing reasonably good agreement in the railhead region, while an underestimation is observed in the rail web and rail foot regions. Furthermore, a systematic parametric investigation is conducted by varying two key process parameters, namely the molten metal temperature examined at four distinct levels ranging from 1800 (≈2073 K) to 2400 (≈2673 K), and the active preheating duration, varied across six values ranging from 90 (1.5 min)–390 (6.5 min), in order to assess their influence on the cooling stage. The numerical results provide detailed insight into the temporal evolution of the thermal field and its influence on the formation and extent of the fusion zone and heat-affected zone. The results demonstrate that, despite simplifications, the model captures the dominant thermal phenomena of the process and offers a computationally efficient tool for parameter studies and process optimisation.Open AccessA Simplified CFD Framework for Parametric Analysis of the Cooling Stage During Aluminothermic Rail Welding: Rapid Welding Process with Short Preheating
The quality and integrity of aluminothermic rail welds are strongly governed by the thermal conditions involved during preheating, pouring and cooling stages of the process. In this study, a simplified numerical framework is presented, based on the finite volume method and implemented in the open-source software OpenFOAM® version 7, to predict the heat transfer and solidification processes. Within this framework, the preheating stage is simulated by employing a heat flux profile derived from experimental measurements, while the mould filling stage is neglected under the assumption of instantaneous pouring of the molten metal. The steel–slag multiphase system is treated using the Volume of Fluid method, whereas melting and solidification are captured using the enthalpy-porosity approach on a fixed Eulerian grid. The numerical framework is validated for a rapid welding process with short preheating procedure, consistent with typical industrial practice for rail welding. The predicted temperature histories during the preheating stage show sufficiently good agreement with the experimental measurements. Subsequently, the cooling stage is validated for a molten metal temperature of 2200 (≈2473 K). The predicted width of the fusion zone is compared with experimental data, showing reasonably good agreement in the railhead region, while an underestimation is observed in the rail web and rail foot regions. Furthermore, a systematic parametric investigation is conducted by varying two key process parameters, namely the molten metal temperature examined at four distinct levels ranging from 1800 (≈2073 K) to 2400 (≈2673 K), and the active preheating duration, varied across six values ranging from 90 (1.5 min)–390 (6.5 min), in order to assess their influence on the cooling stage. The numerical results provide detailed insight into the temporal evolution of the thermal field and its influence on the formation and extent of the fusion zone and heat-affected zone. The results demonstrate that, despite simplifications, the model captures the dominant thermal phenomena of the process and offers a computationally efficient tool for parameter studies and process optimisation.