Yutong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yutong Wang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Hua Chai
Wuhan Zhongwang Yineng Technology Development Co., Ltd., Wuhan 430074, China
3 shared publications - Wangshui Hu
College of Geosciences, Yangtze University, Wuhan 430100, China
3 shared publications - Chenglin Wang
Wuhan Zhongwang Yineng Technology Development Co., Ltd., Wuhan 430074, China
2 shared publications - Ping He
Wuhan Zhongwang Yineng Technology Development Co., Ltd., Wuhan 430074, China
2 shared publications - Su Lyu
Wuhan Zhongwang Yineng Technology Development Co., Ltd., Wuhan 430074, China
2 shared publications - Tao Li
College of Geosciences, Yangtze University, Wuhan 430100, China
2 shared publications
Latest Publications
- Open Access
- 5 November 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (21) , 10957
Pore Structure Characterization and Single-Phase Flow Analysis of Glutenite and Pebbly Sandstone Reservoir Samples from the D84 Block Using CT Digital Cores
Pore-scale heterogeneity is an important consideration in the evaluation of heavy-oil reservoirs. The aim of this study was to reconstruct CT-based digital cores of four plug samples, characterize their pore structures, and analyze single-phase flow behavior, in order to clarify how pore geometry and segmentation control the computed porosity and permeability. Four plug samples (two glutenite and two pebbly sandstone) from the Guantao Formation of the D84 Block, Liaohe Depression, were investigated using X-ray micro-computed tomography (micro-CT) with an isotropic voxel size of 9.37 μm. Three-dimensional digital cores were reconstructed through image preprocessing and interactive threshold segmentation. CT-derived porosity, volume-weighted equivalent-diameter distributions of labeled pore objects, and axial porosity variability were analyzed. Single-phase flow simulations were performed in PerGeos to estimate permeability and visualize streamline and pressure distributions. The CT-derived porosities ranged from 27.37% to 32.92%, whereas the simulated permeabilities ranged from 1009 to 1477 mD. ZS-1 exhibited the lowest CT-derived porosity but the highest simulated permeability, indicating that bulk porosity alone did not fully account for variations in simulated flow behavior among the four samples. The simulated permeabilities were lower than the laboratory-measured values, with relative differences ranging from 10.6% to 52.4%. These differences highlight the influence of image resolution, segmentation, and differences between numerical and experimental conditions on image-based permeability estimation. The study provides a sample-scale characterization of pore structures and single-phase flow behavior in the investigated reservoir material.
- 5 November 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (21) , 10957
Open AccessPore Structure Characterization and Single-Phase Flow Analysis of Glutenite and Pebbly Sandstone Reservoir Samples from the D84 Block Using CT Digital Cores
Pore-scale heterogeneity is an important consideration in the evaluation of heavy-oil reservoirs. The aim of this study was to reconstruct CT-based digital cores of four plug samples, characterize their pore structures, and analyze single-phase flow behavior, in order to clarify how pore geometry and segmentation control the computed porosity and permeability. Four plug samples (two glutenite and two pebbly sandstone) from the Guantao Formation of the D84 Block, Liaohe Depression, were investigated using X-ray micro-computed tomography (micro-CT) with an isotropic voxel size of 9.37 μm. Three-dimensional digital cores were reconstructed through image preprocessing and interactive threshold segmentation. CT-derived porosity, volume-weighted equivalent-diameter distributions of labeled pore objects, and axial porosity variability were analyzed. Single-phase flow simulations were performed in PerGeos to estimate permeability and visualize streamline and pressure distributions. The CT-derived porosities ranged from 27.37% to 32.92%, whereas the simulated permeabilities ranged from 1009 to 1477 mD. ZS-1 exhibited the lowest CT-derived porosity but the highest simulated permeability, indicating that bulk porosity alone did not fully account for variations in simulated flow behavior among the four samples. The simulated permeabilities were lower than the laboratory-measured values, with relative differences ranging from 10.6% to 52.4%. These differences highlight the influence of image resolution, segmentation, and differences between numerical and experimental conditions on image-based permeability estimation. The study provides a sample-scale characterization of pore structures and single-phase flow behavior in the investigated reservoir material.
- Open Access
Characterization of Laminae and Lamina-Associated Fractures in the Tight Oil Reservoir of Xifeng Oilfield, Ordos Basin: CT Scanning of Full-Diameter Cores from Horizontal Well X119-19-39H
This study focuses on the Chang 8 Member tight sandstone reservoir in the Xifeng Oilfield. Integrated approaches including 3D reconstruction of CT digital cores, seepage simulation, and multi-parameter coupling analysis were employed to systematically classify lamina types, quantitatively characterize lamina-associated fractures, and elucidate the pore–lamina fracture coupling seepage mechanisms. The results show that laminae in the study area can be categorized into three types: banded, inclined, and cross-laminated. Lamina-associated fractures are dominated by bedding-parallel fractures, with a small number of cross-bedding fractures having developed in cross-laminated intervals. The development of lamina-associated fractures is jointly controlled by sedimentary heterogeneity and mechanical differences between interlaminar layers. A significant positive correlation exists between the volume proportion of interlaminar layers and fracture porosity (R2 = 0.8913). Cross-laminated intervals exhibit the optimal fracture parameters, with fracture porosity reaching up to 3.6% and maximum fracture volume exceeding 3500 mm3, facilitating the formation of three-dimensional interconnected fracture networks. Distinct pore–lamina fracture coupling patterns are observed in different lamina types: independent development with weak coupling in banded laminae, segmented synergy with heterogeneous coupling in inclined laminae, and strong synergy with network coupling in cross-laminated intervals. In cross-laminated sections, matrix porosity and fracture porosity evolve synchronously, yielding the highest permeability (up to 7.3 mD) and superior storage–permeability performance. Seepage simulations confirm that permeability in tight reservoirs is not directly controlled by matrix porosity; instead, lamina-associated fractures act as the dominant fluid migration pathways. Cross-laminated fractures form multi-directional high-efficiency seepage networks, while banded and inclined laminae exhibit unidirectional linear seepage and segmented dominant channeling characteristics, respectively. These findings provide critical geological insights for sweet spot evaluation, horizontal well trajectory optimization, and hydraulic fracturing design in tight oil reservoirs.
Open AccessCharacterization of Laminae and Lamina-Associated Fractures in the Tight Oil Reservoir of Xifeng Oilfield, Ordos Basin: CT Scanning of Full-Diameter Cores from Horizontal Well X119-19-39H
This study focuses on the Chang 8 Member tight sandstone reservoir in the Xifeng Oilfield. Integrated approaches including 3D reconstruction of CT digital cores, seepage simulation, and multi-parameter coupling analysis were employed to systematically classify lamina types, quantitatively characterize lamina-associated fractures, and elucidate the pore–lamina fracture coupling seepage mechanisms. The results show that laminae in the study area can be categorized into three types: banded, inclined, and cross-laminated. Lamina-associated fractures are dominated by bedding-parallel fractures, with a small number of cross-bedding fractures having developed in cross-laminated intervals. The development of lamina-associated fractures is jointly controlled by sedimentary heterogeneity and mechanical differences between interlaminar layers. A significant positive correlation exists between the volume proportion of interlaminar layers and fracture porosity (R2 = 0.8913). Cross-laminated intervals exhibit the optimal fracture parameters, with fracture porosity reaching up to 3.6% and maximum fracture volume exceeding 3500 mm3, facilitating the formation of three-dimensional interconnected fracture networks. Distinct pore–lamina fracture coupling patterns are observed in different lamina types: independent development with weak coupling in banded laminae, segmented synergy with heterogeneous coupling in inclined laminae, and strong synergy with network coupling in cross-laminated intervals. In cross-laminated sections, matrix porosity and fracture porosity evolve synchronously, yielding the highest permeability (up to 7.3 mD) and superior storage–permeability performance. Seepage simulations confirm that permeability in tight reservoirs is not directly controlled by matrix porosity; instead, lamina-associated fractures act as the dominant fluid migration pathways. Cross-laminated fractures form multi-directional high-efficiency seepage networks, while banded and inclined laminae exhibit unidirectional linear seepage and segmented dominant channeling characteristics, respectively. These findings provide critical geological insights for sweet spot evaluation, horizontal well trajectory optimization, and hydraulic fracturing design in tight oil reservoirs.
- Open Access
Visualized Characterization of Reservoir Pore–Throat Blockage Induced by Injection of Various Oily Sludges Using Micro-CT
This paper explores the internal rock plugging rules induced by oily sludge profile control systems in oilfields. Three typical sludges including wastewater tank bottom sludge (WTBS), crude oil tank bottom sludge (CTBS) and floating scum sludge (FSS) are adopted. Combined with micro-CT scanning and digital core technology, this paper systematically investigates the pore–throat structure evolution and damage mechanism before and after sludge injection into rock cores. Key parameters such as plugging rate, average pore radius, throat radius, coordination number, shape factor, pore–throat ratio and pore–throat volume are quantitatively characterized macroscopically and microscopically, which reveal diverse damage modes and plugging mechanisms of the three sludges. The results indicate that pores of 10–50 μm are preferentially blocked by all sludges. CTBS causes the severest core damage with an average plugging rate of 79.67%, and the average coordination number decreases from 4 to 1, governed by the mechanism of adsorption diameter reduction and structural destruction. WTBS leads to uniform jamming of fine particles. Its average parameters change slightly, yet permeability declines due to broken critical throats. It follows the mechanism of uniform filling and weak adsorption with an average plugging rate of 56.75%, showing mild reservoir modification capacity. FSS causes moderate damage. Retained emulsion droplets trigger uniform slight shrinkage of pore throats under partial and overall selective filling mechanism, with an average plugging rate of 63.36% and favorable selective plugging performance. This study clarifies the inherent correlation between macroscopic damage and microscopic behaviors of oily sludge, offering microscopic theoretical references for differentiated management of sludge reinjection and oil displacement with composite sludge profile control agents.
Open AccessVisualized Characterization of Reservoir Pore–Throat Blockage Induced by Injection of Various Oily Sludges Using Micro-CT
This paper explores the internal rock plugging rules induced by oily sludge profile control systems in oilfields. Three typical sludges including wastewater tank bottom sludge (WTBS), crude oil tank bottom sludge (CTBS) and floating scum sludge (FSS) are adopted. Combined with micro-CT scanning and digital core technology, this paper systematically investigates the pore–throat structure evolution and damage mechanism before and after sludge injection into rock cores. Key parameters such as plugging rate, average pore radius, throat radius, coordination number, shape factor, pore–throat ratio and pore–throat volume are quantitatively characterized macroscopically and microscopically, which reveal diverse damage modes and plugging mechanisms of the three sludges. The results indicate that pores of 10–50 μm are preferentially blocked by all sludges. CTBS causes the severest core damage with an average plugging rate of 79.67%, and the average coordination number decreases from 4 to 1, governed by the mechanism of adsorption diameter reduction and structural destruction. WTBS leads to uniform jamming of fine particles. Its average parameters change slightly, yet permeability declines due to broken critical throats. It follows the mechanism of uniform filling and weak adsorption with an average plugging rate of 56.75%, showing mild reservoir modification capacity. FSS causes moderate damage. Retained emulsion droplets trigger uniform slight shrinkage of pore throats under partial and overall selective filling mechanism, with an average plugging rate of 63.36% and favorable selective plugging performance. This study clarifies the inherent correlation between macroscopic damage and microscopic behaviors of oily sludge, offering microscopic theoretical references for differentiated management of sludge reinjection and oil displacement with composite sludge profile control agents.