Shixian Ha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shixian Ha has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Chang-Yong Nam
Department of Materials Science and Chemical Engineering, Stony Brook University 2 , Stony Brook, New York 11794
7 shared publications - Gregrey Swieca
Department of Chemistry and Biochemistry, University of Mississippi 1 , Oxford, Mississippi 38677
5 shared publications - Michael J. Eller
Department of Chemistry and Biochemistry, University of Mississippi 1 , Oxford, Mississippi 38677
5 shared publications - Nikhil Tiwale
Center for Functional Nanomaterials, Brookhaven National Laboratory 3 , Upton, New York 11973
5 shared publications - Won-Il Lee
Department of Materials Science and Chemical Engineering, Stony Brook University 2 , Stony Brook, New York 11794
4 shared publications - Markus Langner
Department of Chemistry and Biochemistry, University of Mississippi 1 , Oxford, Mississippi 38677
3 shared publications
Latest Publications
- 12 November 2026
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 33 (2)
Inspection of PMMA photoresists infiltrated with varying amounts of InOx
Poly(methyl methacrylate) (PMMA) is used in the semiconductor industry as a model positive-tone extreme ultraviolet (EUV) photoresist. Many of these photoresists used commercially suffer from inherently low EUV sensitivity. This issue can be mitigated by incorporating high-Z elements into the organic polymer; however, a uniform distribution of these elements in the hybridized resist is of utmost importance. In this study, PMMA thin films spin-coated on silicon substrates were exposed to varying amounts of InOx (0, 1, 2, and 4 cycles) using vapor-phase infiltration. The molecular uniformity of the organic-inorganic photoresists was examined by nanoprojectile secondary ion mass spectrometry. The primary ion impacts (106–107), separated in time and space, produce mass spectra from each individual impact. The secondary ions were mass analyzed via time-of-flight.
- 12 November 2026
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 33 (2)
Inspection of PMMA photoresists infiltrated with varying amounts of InOx
Poly(methyl methacrylate) (PMMA) is used in the semiconductor industry as a model positive-tone extreme ultraviolet (EUV) photoresist. Many of these photoresists used commercially suffer from inherently low EUV sensitivity. This issue can be mitigated by incorporating high-Z elements into the organic polymer; however, a uniform distribution of these elements in the hybridized resist is of utmost importance. In this study, PMMA thin films spin-coated on silicon substrates were exposed to varying amounts of InOx (0, 1, 2, and 4 cycles) using vapor-phase infiltration. The molecular uniformity of the organic-inorganic photoresists was examined by nanoprojectile secondary ion mass spectrometry. The primary ion impacts (106–107), separated in time and space, produce mass spectra from each individual impact. The secondary ions were mass analyzed via time-of-flight.
- 14 August 2026
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 33 (2)
Investigation of as-cast polymethylmethacrylate based homopolymer resists in positive ion mode with nano projectile secondary ion mass spectrometry
Polymethylmethacrylate (PMMA) is a positive tone photoresist, which undergoes chain scission under extreme ultraviolet exposure and is often used as a model photoresist for mechanistic studies due to its simplicity. Nano projectile secondary ion mass spectrometry (NP-SIMS) can be used to gain chemical information about the surface composition of a sample. NP-SIMS involves the bombardment of the sample surface with primary ions and the collection of the ejected secondary ions. The primary ions, Au4004+, are separated in time and space, and this enables the analysis of the secondary ions from each individual impact. Thin films (≈25 nm thick) of spin-cast PMMA of different molecular weights (35, 200, 495, and 950 kDa) on the silicon substrate were investigated regarding postincident fragmentation patterns. Three circular areas of 125 μm diameter were analyzed, and a total of 1–1.5 × 106 spectra were taken for each sample.
- 14 August 2026
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 33 (2)
Investigation of as-cast polymethylmethacrylate based homopolymer resists in positive ion mode with nano projectile secondary ion mass spectrometry
Polymethylmethacrylate (PMMA) is a positive tone photoresist, which undergoes chain scission under extreme ultraviolet exposure and is often used as a model photoresist for mechanistic studies due to its simplicity. Nano projectile secondary ion mass spectrometry (NP-SIMS) can be used to gain chemical information about the surface composition of a sample. NP-SIMS involves the bombardment of the sample surface with primary ions and the collection of the ejected secondary ions. The primary ions, Au4004+, are separated in time and space, and this enables the analysis of the secondary ions from each individual impact. Thin films (≈25 nm thick) of spin-cast PMMA of different molecular weights (35, 200, 495, and 950 kDa) on the silicon substrate were investigated regarding postincident fragmentation patterns. Three circular areas of 125 μm diameter were analyzed, and a total of 1–1.5 × 106 spectra were taken for each sample.
- 7 August 2026
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 33 (2)
Investigation of as-cast polymethylmethacrylate based homopolymer resists in negative ion mode with nano projectile secondary ion mass spectrometry
Polymethylmethacrylate (PMMA) undergoes chain scission under exposure of high-energy photons or electrons, leading to a solubility switch in exposed areas. It is often used as a model photoresist for mechanistic studies due to its chemical and mechanistic simplicity. Nano projectile secondary ion mass spectrometry (NP-SIMS) can be used to gain chemical information about the surface composition of a sample with high lateral resolution. NP-SIMS involves the bombardment of the surface with primary ions, Au4004+ in this case, and the collection of the ejected secondary ions. The separation of the primary ions in time and space enables the analysis of the secondary ions from each individual impact. Thin films (≈25 nm thickness) of spin-cast PMMA of different molecular weights (between 1.3 and 950 kDa) on the silicon substrate were investigated regarding postincident fragmentation patterns. Three circular areas of 125 μm diameter were analyzed and a total of 2–3 × 106 spectra were taken for each sample.
- 7 August 2026
- Published by American Vacuum Society in Surface Science Spectra
- Vol. 33 (2)
Investigation of as-cast polymethylmethacrylate based homopolymer resists in negative ion mode with nano projectile secondary ion mass spectrometry
Polymethylmethacrylate (PMMA) undergoes chain scission under exposure of high-energy photons or electrons, leading to a solubility switch in exposed areas. It is often used as a model photoresist for mechanistic studies due to its chemical and mechanistic simplicity. Nano projectile secondary ion mass spectrometry (NP-SIMS) can be used to gain chemical information about the surface composition of a sample with high lateral resolution. NP-SIMS involves the bombardment of the surface with primary ions, Au4004+ in this case, and the collection of the ejected secondary ions. The separation of the primary ions in time and space enables the analysis of the secondary ions from each individual impact. Thin films (≈25 nm thickness) of spin-cast PMMA of different molecular weights (between 1.3 and 950 kDa) on the silicon substrate were investigated regarding postincident fragmentation patterns. Three circular areas of 125 μm diameter were analyzed and a total of 2–3 × 106 spectra were taken for each sample.
- 7 August 2026
- Published by Elsevier in Journal of Membrane Science
- Vol. 758
Rapid pyrolysis of polybenzimidazole by laser irradiation to enhance H2/CO2 separation properties
- 7 August 2026
- Published by Elsevier in Journal of Membrane Science
- Vol. 758
Rapid pyrolysis of polybenzimidazole by laser irradiation to enhance H2/CO2 separation properties
- 1 July 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanopatterning, Materials, and Metrology
- Vol. 25 (03) , 1-11
Secondary ion mass spectrometry on polymers: pathway to molecular weight determination and evaluation of surface segregation
BackgroundThe molecular weight (MW) of a photoresist can influence its properties and is an important metric for patterning. However, it is challenging to measure the MW in the solid phase, where the spatial distribution of MW can be nonuniform due to segregation effects during deposition.AimUsing surface mass spectrometry techniques such as secondary ion mass spectrometry (SIMS); the ratio and abundance of characteristic secondary ions (SI) can be used to determine the MW of the polymer and potentially the spatial distribution of molecular weights.ApproachExperiments on polymethylmethacrylate (PMMA) with different MW were analyzed with nanoprojectile SIMS (NP-SIMS) using Au4004+ as a primary ion and compared with reported values in the literature using different primary ion projectiles (Ga+, C60+, Au+).ResultsThe results are in good agreement with the literature. Using Au4004+ leads to a 5 to 100-fold increase in yields for observed PMMA peaks compared with other primary ions. We found that the sum of all ions between 0 and 200 m/z is inversely related to the MW of the polymer; however, factors related to manufacturing affect the yields significantly. A general trend of increasing MW and decreasing ratio of end-group to main chain ions was observed for all SIMS projectiles and could be applied to results obtained from different SIMS instrumentation. The experimental results were compared with theoretical end-group concentrations at the surface, and the equation for end-group segregation was fitted to the experimental values, which shows the influence of spin-casting compared with polymer melts in equilibrium.ConclusionNP-SIMS can be used to identify the MW of a sample if all other factors of the manufacturing process are carefully monitored. Furthermore, this method could be used to investigate the MW of as-cast photoresists or monitor changes in the MW of a polymer as a result of exposure. In addition, the detection of both main chain and end-group ions makes an analysis of the extent of surface segregation of end-groups feasible.
- 1 July 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanopatterning, Materials, and Metrology
- Vol. 25 (03) , 1-11
Secondary ion mass spectrometry on polymers: pathway to molecular weight determination and evaluation of surface segregation
BackgroundThe molecular weight (MW) of a photoresist can influence its properties and is an important metric for patterning. However, it is challenging to measure the MW in the solid phase, where the spatial distribution of MW can be nonuniform due to segregation effects during deposition.AimUsing surface mass spectrometry techniques such as secondary ion mass spectrometry (SIMS); the ratio and abundance of characteristic secondary ions (SI) can be used to determine the MW of the polymer and potentially the spatial distribution of molecular weights.ApproachExperiments on polymethylmethacrylate (PMMA) with different MW were analyzed with nanoprojectile SIMS (NP-SIMS) using Au4004+ as a primary ion and compared with reported values in the literature using different primary ion projectiles (Ga+, C60+, Au+).ResultsThe results are in good agreement with the literature. Using Au4004+ leads to a 5 to 100-fold increase in yields for observed PMMA peaks compared with other primary ions. We found that the sum of all ions between 0 and 200 m/z is inversely related to the MW of the polymer; however, factors related to manufacturing affect the yields significantly. A general trend of increasing MW and decreasing ratio of end-group to main chain ions was observed for all SIMS projectiles and could be applied to results obtained from different SIMS instrumentation. The experimental results were compared with theoretical end-group concentrations at the surface, and the equation for end-group segregation was fitted to the experimental values, which shows the influence of spin-casting compared with polymer melts in equilibrium.ConclusionNP-SIMS can be used to identify the MW of a sample if all other factors of the manufacturing process are carefully monitored. Furthermore, this method could be used to investigate the MW of as-cast photoresists or monitor changes in the MW of a polymer as a result of exposure. In addition, the detection of both main chain and end-group ions makes an analysis of the extent of surface segregation of end-groups feasible.
- Open Access
- 5 June 2026
- Published by Elsevier in SSRN Electronic Journal
Rapid pyrolysis of polybenzimidazole by laser irradiation to enhance H2/CO2 separation properties
Carbon molecular sieve membranes have emerged as an exciting platform because they contain microcavities that yield high gas permeability and ultramicropores that render high selectivity. However, they are usually prepared by carbonizing polymers in a meticulous, highly energy-intensive, and time-consuming process. Here, we report rapid CO2 laser irradiation to carbonize the surface of polybenzimidazole (PBI), creating hierarchically porous laser-induced graphene (LIG) within seconds and thereby dramatically increasing both H2 permeability and H2/CO2 selectivity. The effects of laser power and film thickness on morphology, carbonization degree, and H2/CO2 separation properties are systematically investigated. For example, laser irradiation at 3.5 W increases the film thickness from 10 to 26 µm, H2 permeability from 1.9 to 17 Barrer, and H2/CO2 selectivity from 11 to 20 at 35 °C; the irradiated film also maintains stable mixed-gas H2/CO2 separation at temperatures up to 125 °C and pressures up to 10 atm. This work demonstrates laser processing as a rapid and scalable route to enhance both permeability and selectivity in polymers and membranes for practical applications.
- 5 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRapid pyrolysis of polybenzimidazole by laser irradiation to enhance H2/CO2 separation properties
Carbon molecular sieve membranes have emerged as an exciting platform because they contain microcavities that yield high gas permeability and ultramicropores that render high selectivity. However, they are usually prepared by carbonizing polymers in a meticulous, highly energy-intensive, and time-consuming process. Here, we report rapid CO2 laser irradiation to carbonize the surface of polybenzimidazole (PBI), creating hierarchically porous laser-induced graphene (LIG) within seconds and thereby dramatically increasing both H2 permeability and H2/CO2 selectivity. The effects of laser power and film thickness on morphology, carbonization degree, and H2/CO2 separation properties are systematically investigated. For example, laser irradiation at 3.5 W increases the film thickness from 10 to 26 µm, H2 permeability from 1.9 to 17 Barrer, and H2/CO2 selectivity from 11 to 20 at 35 °C; the irradiated film also maintains stable mixed-gas H2/CO2 separation at temperatures up to 125 °C and pressures up to 10 atm. This work demonstrates laser processing as a rapid and scalable route to enhance both permeability and selectivity in polymers and membranes for practical applications.
- 1 April 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanopatterning, Materials, and Metrology
- Vol. 24 (02) , 1-10
Inspection of next-generation EUV resists with nano-projectile secondary ion mass spectrometry
There is a rapidly growing need for new materials for extreme ultraviolet (EUV) lithography, which incorporate high EUV absorbing elements. Hybrid resists, which are a combination of inorganic and organic moieties, are promising as they offer both high EUV sensitivity and high etch resistance. However, there is a glaring lack of methods to examine the uniformity of these important materials at the nanoscale. We examine the capabilities of nano-projectile secondary ion mass spectrometry (NP-SIMS) to investigate hybrid resists. NP-SIMS is a mass spectrometry-based technique with high lateral resolution. Using NP-SIMS, a surface is probed stochastically with a suite of individual projectiles, 106 to 107 in total, separated in time and space. Examining these individual mass spectra allows for nanoscale investigation of the uniformity of the surface. We evaluated the performance of NP-SIMS using samples of poly(methyl methacrylate) (PMMA) infiltrated with varying amounts of InOx via vapor-phase infiltration (VPI), an organic–inorganic hybridization method derived from atomic layer deposition. We found that NP-SIMS measurements contained abundant characteristic ions related to both the PMMA and infiltrated In. The intensity of In atomic ions increased linearly with the number of infiltration cycles; however, the uniformity of In and PMMA varied with the number of infiltration cycles. After one cycle, we found that both the PMMA and In were relatively inhomogeneous. The homogeneity improved with subsequent infiltration cycles. In addition, NP-SIMS measurements contained characteristic ions related to the infiltration reaction and provided insights into the VPI mechanism. Overall, the results show that NP-SIMS is capable of examining both the inorganic and organic moieties in a hybrid resist and will be an important method for understanding the performance of these materials for use in EUV lithography.
- 1 April 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanopatterning, Materials, and Metrology
- Vol. 24 (02) , 1-10
Inspection of next-generation EUV resists with nano-projectile secondary ion mass spectrometry
There is a rapidly growing need for new materials for extreme ultraviolet (EUV) lithography, which incorporate high EUV absorbing elements. Hybrid resists, which are a combination of inorganic and organic moieties, are promising as they offer both high EUV sensitivity and high etch resistance. However, there is a glaring lack of methods to examine the uniformity of these important materials at the nanoscale. We examine the capabilities of nano-projectile secondary ion mass spectrometry (NP-SIMS) to investigate hybrid resists. NP-SIMS is a mass spectrometry-based technique with high lateral resolution. Using NP-SIMS, a surface is probed stochastically with a suite of individual projectiles, 106 to 107 in total, separated in time and space. Examining these individual mass spectra allows for nanoscale investigation of the uniformity of the surface. We evaluated the performance of NP-SIMS using samples of poly(methyl methacrylate) (PMMA) infiltrated with varying amounts of InOx via vapor-phase infiltration (VPI), an organic–inorganic hybridization method derived from atomic layer deposition. We found that NP-SIMS measurements contained abundant characteristic ions related to both the PMMA and infiltrated In. The intensity of In atomic ions increased linearly with the number of infiltration cycles; however, the uniformity of In and PMMA varied with the number of infiltration cycles. After one cycle, we found that both the PMMA and In were relatively inhomogeneous. The homogeneity improved with subsequent infiltration cycles. In addition, NP-SIMS measurements contained characteristic ions related to the infiltration reaction and provided insights into the VPI mechanism. Overall, the results show that NP-SIMS is capable of examining both the inorganic and organic moieties in a hybrid resist and will be an important method for understanding the performance of these materials for use in EUV lithography.