XYXiaoyun Yang

Xiaoyun Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaoyun Yang has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Experimental Validation of a Passive Following System for a Mecanum-Wheel Mobile Platform Based on Gimbal Posture Perception and Orthogonal Odometry Fusion

    by Xinyang Yu, Zhenhua Wang, Haoyan Duan, Xiaoyun Yang

    Indoor companion, rehabilitation, logistics, laboratory transport, and service robot scenarios require mobile platforms that can follow a human operator safely and flexibly under lighting changes, occlusion, texture-poor corridors, and dynamic pedestrian environments. Vision-, LiDAR-, and UWB-based following systems can provide high perception capability, but their deployment cost, environmental dependence, and sensing complexity remain limiting factors for low-perception-dependence applications. This paper presents a passive following system for a Mecanum-wheel mobile platform based on gimbal posture perception and orthogonal odometry fusion. A rope-tensioned two-axis gimbal is mounted above a 300 mm x 300 mm x 150 mm omnidirectional chassis, and a six-axis inertial sensor installed at the top of the gimbal detects pitch and roll changes induced by user traction. A piecewise posture-to-velocity mapping model with a dead zone, saturation, low-pass filtering, and acceleration limiting converts the user's traction intention into planar velocity commands in the vehicle coordinate frame. To reduce pose errors caused by Mecanum-wheel slip and discontinuous roller-ground contact, two orthogonal passive odometry wheels and inertial attitude estimation are fused to provide planar position feedback for closed-loop following. A prototype was implemented using an Infineon TRAVEO CYT4BB77 controller, TI DRV8701E motor drivers, six-axis IMUs, magnetic encoders, and an embedded display interface. Experiments evaluated attitude estimation accuracy, planar localization accuracy, passive following performance, gyroscope compensation, and open-loop/closed-loop following. The compensated attitude module achieved a static yaw drift of 0.45 deg/h and dynamic attitude RMSE below 0.56 deg. Orthogonal odometry fusion produced an average positioning error of 3.8 mm over a 3000 mm linear displacement, reducing error by approximately 84.6% compared with pure Mecanum-wheel drive odometry. In a 5000 mm forward traction task, closed-loop following reduced the average distance error from 38.6 mm to 11.5 mm compared with open-loop attitude mapping. The results indicate that the proposed gimbal-orthogonal-odometry architecture provides a compact, intuitive, and environment-robust solution for passive following on omnidirectional mobile platforms.