Yangyang Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yangyang Yang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Biao Li
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China
1 shared publication - Mengqi Li
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China
1 shared publication - Yang Li
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan, People’s Republic of China
1 shared publication - Zhiwei Jiang
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China
1 shared publication - Zirui Wang
School of Civil Engineering, Architecture and Environment, Hubei University of Technology, Wuhan 430068, China
1 shared publication
Latest Publications
- Open Access
Flexural Deflection and Cracking Behavior of Sustainable Geopolymeric Recycled Aggregate Concrete Beams: Experimental Investigation and Analytical Model
Geopolymeric concrete beams are gaining increasing attention as sustainable structural members. The paper presents an experimental investigation on the deflection and cracking behavior of geopolymeric recycled aggregate concrete (GRAC) beams, with emphasis on effects of the longitudinal reinforcement ratio and the recycled aggregate (RA) replacement ratio. Using digital image correlation (DIC) technology, the failure modes, load–deflection curves, deflection characteristics, stiffness, and cracking behavior were systematically analyzed. The results indicated that increasing the reinforcement ratio leads to the same trend in GRAC beams as that observed in ordinary reinforced concrete beams. At 50% RA replacement, GRAC beams exhibit improved cracking resistance, 13.41% higher cracking stiffness, 6.93% lower deflection, and enhanced ductility compared to specimens without RA, attributed to the enhanced RA–matrix interface. However, a further increase in the RA replacement ratio leads to poorer flexural performance of the GRAC beams. In addition, predictive models for cracking moment, stiffness, deflection, and maximum crack width of GRAC beams were proposed based on the experimental results, incorporating the plastic influence coefficient, the comprehensive coefficient for the average strain at the extreme compression zone of concrete and the maximum crack width correction factor. The calculated values agreed well with the test data, offering a basis for structural design and engineering application.
Open AccessFlexural Deflection and Cracking Behavior of Sustainable Geopolymeric Recycled Aggregate Concrete Beams: Experimental Investigation and Analytical Model
Geopolymeric concrete beams are gaining increasing attention as sustainable structural members. The paper presents an experimental investigation on the deflection and cracking behavior of geopolymeric recycled aggregate concrete (GRAC) beams, with emphasis on effects of the longitudinal reinforcement ratio and the recycled aggregate (RA) replacement ratio. Using digital image correlation (DIC) technology, the failure modes, load–deflection curves, deflection characteristics, stiffness, and cracking behavior were systematically analyzed. The results indicated that increasing the reinforcement ratio leads to the same trend in GRAC beams as that observed in ordinary reinforced concrete beams. At 50% RA replacement, GRAC beams exhibit improved cracking resistance, 13.41% higher cracking stiffness, 6.93% lower deflection, and enhanced ductility compared to specimens without RA, attributed to the enhanced RA–matrix interface. However, a further increase in the RA replacement ratio leads to poorer flexural performance of the GRAC beams. In addition, predictive models for cracking moment, stiffness, deflection, and maximum crack width of GRAC beams were proposed based on the experimental results, incorporating the plastic influence coefficient, the comprehensive coefficient for the average strain at the extreme compression zone of concrete and the maximum crack width correction factor. The calculated values agreed well with the test data, offering a basis for structural design and engineering application.