Md. Fahim Al Mamun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Md. Fahim Al Mamun has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Ajoy Kumer
Department of Chemistry IUBAT‐International University of Business Agriculture & Technology Dhaka Bangladesh
3 shared publications - Suvash Chandra Paul
International University of Business Agriculture and Technology
3 shared publications - Adewumi John Babafemi
Department of Civil Engineering, Stellenbosch University, Stellenbosch 7602, South Africa
2 shared publications - Noor Md. Sadiqul Hasan
Department of Civil Engineering, College of Engineering and Technology, International University of Business Agriculture and Technology, Dhaka, Bangladesh
2 shared publications Tangel Hossen Sehan
Department of Civil Engineering, College of Engineering Sciences, IUBAT—International University of Business Agriculture and Technology, Uttara Model Town, Dhaka, Bangladesh
2 shared publications- Abdul Basit
Department of Civil Engineering, International University of Business Agriculture and Technology, Dhaka, Bangladesh
1 shared publication
Latest Publications
- Open Access
- 23 September 2026
- Published by Springer Nature in Journal of Materials Science: Materials Theory
- Vol. 10 (1) , 20
DFT-based screening of Cu2ZnSn(Se1-xSx)4 semiconductors for gas adsorption and photocatalytic applications in cement-industry pollutants
- 23 September 2026
- Published by Springer Nature in Journal of Materials Science: Materials Theory
- Vol. 10 (1) , 20
Open AccessDFT-based screening of Cu2ZnSn(Se1-xSx)4 semiconductors for gas adsorption and photocatalytic applications in cement-industry pollutants
- Open Access
- 23 July 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 21 (1)
Computational investigation and mechanistic study of Nano-TiO2 particles compared with the TiO2 molecular crystal for wastewater treatment through DFT and Monte Carlo simulation
The optimization of TiO 2 using density functional theory (DFT) and Monte Carlo simulations reveals its structural and electronic properties, thereby enhancing its photocatalytic and adsorption properties for wastewater treatment. This study examines the photocatalytic behavior of TiO 2 in both molecular and nanoparticle phases using the GGA-PBE and GGA-RPBE functionals. Band gap analysis, DOS, and PDOS indicate that TiO 2 molecules exhibit a lower band gap (1.626 eV, GGA-PBE), enabling superior visible-light absorption compared to TiO 2 nanoparticles (2.322 eV and 2.357 eV for GGA-PBE and GGA-RPBE). GGA-RPBE accurately predicts the TiO 2 molecular-phase band gap (1.753 eV vs. 1.76 eV exp., 0.4% error), thereby justifying its selection for reliable DFT studies of related crystal structures. The effective mass of TiO 2 nanoparticles (0.43) is more favorable than that of molecules (0.57), indicating greater charge-carrier efficiency. TiO 2 nanoparticles also demonstrate superior adsorption for pollutants, such as Methylene Blue (MB), SO 3 , Cr 6+ , CO 2 , and Pb, due to their high surface area, small particle size, and abundant active sites. Monte Carlo simulations using the Absorption Locator confirm that nanoparticles exhibit higher adsorption energy and stronger pollutant binding affinities than TiO 2 molecules. These results highlight the potential of nanoparticles for efficient removal of toxic dyes, heavy metals, and acidifying compounds. Ultimately, this study underscores the complementary strengths of TiO 2 : nanoparticles excel in adsorption-driven wastewater treatment, while molecular TiO 2 is more effective for visible-light photocatalysis. These insights contribute to optimizing TiO 2 -based pollutant removal strategies using nanoparticles for environmental applications.
- 23 July 2026
- Published by Springer Nature in Journal of Materials Science: Materials in Engineering
- Vol. 21 (1)
Open AccessComputational investigation and mechanistic study of Nano-TiO2 particles compared with the TiO2 molecular crystal for wastewater treatment through DFT and Monte Carlo simulation
The optimization of TiO 2 using density functional theory (DFT) and Monte Carlo simulations reveals its structural and electronic properties, thereby enhancing its photocatalytic and adsorption properties for wastewater treatment. This study examines the photocatalytic behavior of TiO 2 in both molecular and nanoparticle phases using the GGA-PBE and GGA-RPBE functionals. Band gap analysis, DOS, and PDOS indicate that TiO 2 molecules exhibit a lower band gap (1.626 eV, GGA-PBE), enabling superior visible-light absorption compared to TiO 2 nanoparticles (2.322 eV and 2.357 eV for GGA-PBE and GGA-RPBE). GGA-RPBE accurately predicts the TiO 2 molecular-phase band gap (1.753 eV vs. 1.76 eV exp., 0.4% error), thereby justifying its selection for reliable DFT studies of related crystal structures. The effective mass of TiO 2 nanoparticles (0.43) is more favorable than that of molecules (0.57), indicating greater charge-carrier efficiency. TiO 2 nanoparticles also demonstrate superior adsorption for pollutants, such as Methylene Blue (MB), SO 3 , Cr 6+ , CO 2 , and Pb, due to their high surface area, small particle size, and abundant active sites. Monte Carlo simulations using the Absorption Locator confirm that nanoparticles exhibit higher adsorption energy and stronger pollutant binding affinities than TiO 2 molecules. These results highlight the potential of nanoparticles for efficient removal of toxic dyes, heavy metals, and acidifying compounds. Ultimately, this study underscores the complementary strengths of TiO 2 : nanoparticles excel in adsorption-driven wastewater treatment, while molecular TiO 2 is more effective for visible-light photocatalysis. These insights contribute to optimizing TiO 2 -based pollutant removal strategies using nanoparticles for environmental applications.
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1) , 4058449
Impact of Acidic, Basic, and Corrosive Water Quality on Key Properties of Whitewash Coating at Elevated Temperatures
This study investigates the impact of chemically modified acidic, alkaline, and chloride‐containing coating systems on the mechanical, physical, and microstructural properties of whitewash coatings at elevated temperatures. The investigated coating is a commercial composite whitewash coating prepared by mixing white paint, white sealer, and wall putty in a volumetric ratio of 2:2.5:1, which is incorporated into standard, basic, acidic, and corrosive solutions and applied to cement mortar substrates prior to isochronal heat treatments up to 500°C. Comprehensive characterization, including hardness, density, compressive strength, frictional loss, CIELAB colorimetric analysis, optical microscopy, and scanning electron microscopy–energy‐dispersive X‐ray (SEM–EDX), was conducted to assess changes in properties. The findings indicate that the color of white coating samples remains stable up to 200°C, with significant thermal degradation occurring beyond this threshold, peaking at 300°C before diminishing due to chemical reactions and substance evaporation. Strength parameters such as hardness and compressive strength increase with temperature up to ~200°C, primarily due to the evaporation of free moisture and the resulting densification, which improves interparticle contact and yields a temporarily more compact, stable structure. However, beyond this temperature, strength declines as structural integrity deteriorates; progressive dehydration and degradation of the calcium‐rich mineral constituents and the polymeric binder system reduce the coating’s structural integrity. Normal water produces smoother surfaces, while heating to 400°C dislodges the whitewash coating. Chemical modification induces notable color transitions, microstructural cracking, and strength loss, with more severe deterioration under acidic and corrosive conditions than in basic modification. Acidic modification causes significant etching that weakens the coating system and leads to esthetic issues, while basic modification may induce cracks with less severity. Corrosive conditions primarily result in surface deterioration and crack development due to chemical decomposition.
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1) , 4058449
Open AccessImpact of Acidic, Basic, and Corrosive Water Quality on Key Properties of Whitewash Coating at Elevated Temperatures
This study investigates the impact of chemically modified acidic, alkaline, and chloride‐containing coating systems on the mechanical, physical, and microstructural properties of whitewash coatings at elevated temperatures. The investigated coating is a commercial composite whitewash coating prepared by mixing white paint, white sealer, and wall putty in a volumetric ratio of 2:2.5:1, which is incorporated into standard, basic, acidic, and corrosive solutions and applied to cement mortar substrates prior to isochronal heat treatments up to 500°C. Comprehensive characterization, including hardness, density, compressive strength, frictional loss, CIELAB colorimetric analysis, optical microscopy, and scanning electron microscopy–energy‐dispersive X‐ray (SEM–EDX), was conducted to assess changes in properties. The findings indicate that the color of white coating samples remains stable up to 200°C, with significant thermal degradation occurring beyond this threshold, peaking at 300°C before diminishing due to chemical reactions and substance evaporation. Strength parameters such as hardness and compressive strength increase with temperature up to ~200°C, primarily due to the evaporation of free moisture and the resulting densification, which improves interparticle contact and yields a temporarily more compact, stable structure. However, beyond this temperature, strength declines as structural integrity deteriorates; progressive dehydration and degradation of the calcium‐rich mineral constituents and the polymeric binder system reduce the coating’s structural integrity. Normal water produces smoother surfaces, while heating to 400°C dislodges the whitewash coating. Chemical modification induces notable color transitions, microstructural cracking, and strength loss, with more severe deterioration under acidic and corrosive conditions than in basic modification. Acidic modification causes significant etching that weakens the coating system and leads to esthetic issues, while basic modification may induce cracks with less severity. Corrosive conditions primarily result in surface deterioration and crack development due to chemical decomposition.
- 1 September 2025
- Published by Springer Nature
- p. 87-102
Wireless Fidelity (Wi-Fi) Attenuation Value in Identifying the Chloride Concentration in Concrete for Sustainable Health Monitoring
- 1 September 2025
- Published by Springer Nature
- p. 87-102
Wireless Fidelity (Wi-Fi) Attenuation Value in Identifying the Chloride Concentration in Concrete for Sustainable Health Monitoring
- 9 February 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9 (3) , 1-16
Chloride detection in concrete using wireless fidelity (Wi-Fi) signal
- 9 February 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9 (3) , 1-16
Chloride detection in concrete using wireless fidelity (Wi-Fi) signal
- Open Access
- 20 September 2023
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (9) , 402
Potential Use of COVID-19 Surgical Masks and Polyethylene Plastics in Developing Sustainable Concrete
Managing disposable waste surgical face masks and plastic made from polyethylene (PE) resin is a real challenge. Thus, these are considered a great threat to the environment. Generally, surgical face masks are made of microplastic made of polypropylene materials. Both polypropylene and PE are not easily decomposable in the soil. Consequently, the presence of these waste materials can have detrimental effects on terrestrial and aquatic ecosystems, exacerbating the ongoing crisis faced by the animal kingdom and the broader biosphere. Hence, it is imperative to identify alternate and efficient methods for waste management. Given its significant economic importance, the construction industry holds a prominent position among many industries globally. Consequently, waste masks within the construction sector might assume a crucial role in mitigating plastic pollution. Concrete, one of the most widely used construction materials, is being adapted with various waste materials as the partial or complete substitutes for natural constituents, such as cement and aggregates. This study focused on using different percentages of used COVID-19 surgical masks in fiber form and PE as partial replacements of natural coarse aggregates in producing sustainable concrete. Mask fibers were used in concrete production at percentages of 0%, 0.5%, 1%, 1.5%, and 2% of the total volume of concrete. Similarly, PE aggregates replaced the coarse aggregates by volume at 0%, 5%, 10%, and 15% in concrete. The results showed that the strength of concrete reduced as the percentages of mask fiber and PE aggregates increased. However, the strength and crack-bridging capability of mask concrete are still acceptable for some structural and non-structural applications. The results obtained from this research could also help engineers to design sustainable concrete materials with mask fibers.
- 20 September 2023
- Published by MDPI AG in Journal of Composites Science
- Vol. 7 (9) , 402
Open AccessPotential Use of COVID-19 Surgical Masks and Polyethylene Plastics in Developing Sustainable Concrete
Managing disposable waste surgical face masks and plastic made from polyethylene (PE) resin is a real challenge. Thus, these are considered a great threat to the environment. Generally, surgical face masks are made of microplastic made of polypropylene materials. Both polypropylene and PE are not easily decomposable in the soil. Consequently, the presence of these waste materials can have detrimental effects on terrestrial and aquatic ecosystems, exacerbating the ongoing crisis faced by the animal kingdom and the broader biosphere. Hence, it is imperative to identify alternate and efficient methods for waste management. Given its significant economic importance, the construction industry holds a prominent position among many industries globally. Consequently, waste masks within the construction sector might assume a crucial role in mitigating plastic pollution. Concrete, one of the most widely used construction materials, is being adapted with various waste materials as the partial or complete substitutes for natural constituents, such as cement and aggregates. This study focused on using different percentages of used COVID-19 surgical masks in fiber form and PE as partial replacements of natural coarse aggregates in producing sustainable concrete. Mask fibers were used in concrete production at percentages of 0%, 0.5%, 1%, 1.5%, and 2% of the total volume of concrete. Similarly, PE aggregates replaced the coarse aggregates by volume at 0%, 5%, 10%, and 15% in concrete. The results showed that the strength of concrete reduced as the percentages of mask fiber and PE aggregates increased. However, the strength and crack-bridging capability of mask concrete are still acceptable for some structural and non-structural applications. The results obtained from this research could also help engineers to design sustainable concrete materials with mask fibers.