Qintao Shen

Porous ceramics have garnered widespread attention in high-temperature insulation, aerospace, and other fields due to their excellent thermal stability, low density, and superior thermal insulation performance. However, traditional preparation technologies suffer from limitations such as poor pore structure controllability, unstable mechanical properties, and long production cycles. In recent years, 3D printing (additive manufacturing) technology has emerged as a disruptive approach to address these challenges, enabling precise fabrication of porous ceramics with complex structures and tailored properties. This review comprehensively summarizes the research progress on 3D-printed porous ceramics, focusing on preparation technologies, structure optimization, and performance regulation. First, the principles and drawbacks of traditional preparation methods are analyzed. Then, four mainstream 3D printing technologies (Binder Jetting, Material Extrusion, Vat Photopolymerization, and Material Jetting) for porous ceramics are elaborated on in terms of forming mechanisms, process characteristics, typical cases, and performance advantages/disadvantages. Additionally, the structure–property optimization strategies, including the design of Triply Periodic Minimal Surface structures and the application of computational modeling and simulation, are discussed to achieve the balance between thermal insulation and mechanical properties. Finally, current challenges and future development trends of 3D-printed porous ceramics are prospected. This review provides a systematic reference for the rational selection of preparation technologies, structural design, and performance optimization of porous ceramics, promoting their engineering applications in high-value fields.

Porous ceramics have shown great application potential in aerospace, electronics, and lithium-ion battery thermal management due to their low density, high specific strength, and excellent thermal insulation. Material Jetting (MJ), a high-precision 3D printing technology, enables the fabrication of porous ceramics with tailored pore structures, but the synergistic effects of pore structure parameters (configuration, porosity, and number of periods) on their thermal insulation performance remain insufficiently explored. This study systematically investigates the thermal insulation behavior of zirconia porous ceramics fabricated by MJ through experimental tests and numerical simulations. Three typical lattice configurations (Octet, Schwarz, and Gyroid) were selected, and samples with varying porosities (40%, 50%, 60%) and numbers of periods (1, 2, 3) were prepared. The results indicate that the Octet configuration (60% porosity, 3 periods) exhibits the optimal thermal insulation performance, with a minimum cold-end temperature of 58.5 °C (experiment) and 59.21 °C (simulation), attributed to its strut-based structure that forms a more tortuous heat conduction path. For the Gyroid configuration, thermal insulation performance improves with increasing porosity (reducing solid conduction dominance under non-forced convection) and decreases with decreasing number of periods (due to inhomogeneous pore distribution extending heat transfer paths). Notably, the trend of porosity affecting thermal insulation is opposite to that of compressive performance. Numerical simulation results are consistent with experimental data in both values and trends, verifying the reliability of the model. This work clarifies the key factors regulating the thermal insulation of MJ-fabricated porous ceramics and provides practical structural design guidelines for applications such as lithium-ion battery thermal runaway management.