Adrian Emanuel Onici
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Adrian Emanuel Onici has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Florentina Niculescu
Faculty of Materials Science and Engineering, National University of Science and Technology Politehnica Bucharest, 313 Splaiul Independentei, J Building, 060042 Bucharest, Romania
2 shared publications - Gheorghe Iacob
Faculty of Materials Science and Engineering, National University of Science and Technology Politehnica Bucharest, 313 Splaiul Independentei, J Building, 060042 Bucharest, Romania
2 shared publications - Lenuta Zidaru
Doctoral School of the Materials Science and Engineering Faculty, National University of Science and Technology Politehnica Bucharest, 313 Splaiul Independentei, J Building, 060042 Bucharest, Romania
2 shared publications - Mariana-Mirela Stănescu
Faculty of Applied Sciences, National University of Science and Technology Politehnica Bucharest, 313 Splaiul Independentei, BN Building, 060042 Bucharest, Romania
2 shared publications - Ionelia Voiculescu
Quality Engineering and Industrial Technology Department, Industrial Engineering and Robotics Faculty, National University of Science and Technology Politehnica Bucharest, 313, Splaiul Independentei, 060042 Bucharest, Romania
1 shared publication - Radu Stefanoiu
Faculty of Materials Science and Engineering, National University of Science and Technology Politehnica Bucharest, 060042 Bucharest, Romania
1 shared publication
Latest Publications
- Open Access
Electrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels
Five experimental Ti-alloyed martensitic stainless steels derived from 17-4PH, with nominal Ti additions of 1–5 wt.%, were investigated to compare electrochemical corrosion behavior, Vickers microhardness, and exploratory numerical assessments. The alloys were produced by vacuum arc melting, solution-treated, and subjected to selected aging schedules. Optical microscopy, SEM–BSE/EDS characterization, image-derived descriptors, microhardness measurements, and potentiodynamic polarization tests in 3.5 wt.% NaCl were employed. The five alloy–aging conditions constituted a non-factorial design with simultaneous compositional and processing variations. P5–H900 exhibited the lowest reported corrosion current density (0.419 µA cm−2) and highest polarization resistance (61.67 kΩ cm2), together with a mean microhardness of 570.6 HV0.2. Its corrosion current density was approximately 93.3-fold lower than that of P1–H900. Stern–Geary recalculation demonstrated internal numerical consistency, whereas leave-one-out cross-validation revealed substantial regression instability. Multicriteria rankings depended on criterion selection, normalization, and weighting assumptions. The absence of independent electrochemical replication and a processing-matched unmodified reference limits causal interpretation and statistical validation. These results support condition-specific comparisons and identify candidates for further controlled investigation rather than establishing an isolated titanium effect or validated predictive optimization.
Open AccessElectrochemical Corrosion Behavior, Mathematical Modeling, and Multicriteria Assessment of Ti-Alloyed Martensitic Stainless Steels
Five experimental Ti-alloyed martensitic stainless steels derived from 17-4PH, with nominal Ti additions of 1–5 wt.%, were investigated to compare electrochemical corrosion behavior, Vickers microhardness, and exploratory numerical assessments. The alloys were produced by vacuum arc melting, solution-treated, and subjected to selected aging schedules. Optical microscopy, SEM–BSE/EDS characterization, image-derived descriptors, microhardness measurements, and potentiodynamic polarization tests in 3.5 wt.% NaCl were employed. The five alloy–aging conditions constituted a non-factorial design with simultaneous compositional and processing variations. P5–H900 exhibited the lowest reported corrosion current density (0.419 µA cm−2) and highest polarization resistance (61.67 kΩ cm2), together with a mean microhardness of 570.6 HV0.2. Its corrosion current density was approximately 93.3-fold lower than that of P1–H900. Stern–Geary recalculation demonstrated internal numerical consistency, whereas leave-one-out cross-validation revealed substantial regression instability. Multicriteria rankings depended on criterion selection, normalization, and weighting assumptions. The absence of independent electrochemical replication and a processing-matched unmodified reference limits causal interpretation and statistical validation. These results support condition-specific comparisons and identify candidates for further controlled investigation rather than establishing an isolated titanium effect or validated predictive optimization.
- Open Access
Microstructural and Compositional Analysis of the Ni–Cr–Mo–Nb–Ta Superalloy with High Stability at High Temperatures
A multicomponent Ni54Cr28Mo8Nb5Ta5 nickel-based superalloy was produced by vacuum induction melting followed by homogenization, hot forging, solution treatment, and aging to investigate its microstructural and mechanical behavior. The X Ray Fluorescence (XRF) analysis confirmed excellent agreement between the nominal and experimental chemical compositions. The X Ray Diffraction(XRD) combined with Rietveld refinement revealed a microstructure dominated by three closely related to face-centered cubic (FCC) (A1) solid-solution regions with slightly different lattice parameters, indicating local compositional variations. The Scanning Electron Microscopy(SEM)/Energy Dispersive Spectroscopy (EDS) observations showed a generally homogeneous elemental distribution, while optical and electron microscopy identified a dendritic microstructure with elongated interdendritic constituents enriched in refractory elements. Mechanical characterization yielded an average hardness of 497 HV0.5, a compressive strength of approximately 1950 MPa, and room-temperature yield and ultimate tensile strengths of 1050 MPa and 1320 MPa, respectively. Tensile strength gradually decreased with increasing temperature up to 900 °C, while ductility increased from 16% to 25% total elongation. The results indicate that the alloy develops a stable FCC matrix primarily strengthened by solid-solution hardening, with the measured mechanical performance suggesting an additional contribution from precipitation hardening. This study provides an experimental baseline for the development and optimization of conventionally processed Ni–Cr–Mo–Nb–Ta superalloys for high-temperature applications.
Open AccessMicrostructural and Compositional Analysis of the Ni–Cr–Mo–Nb–Ta Superalloy with High Stability at High Temperatures
A multicomponent Ni54Cr28Mo8Nb5Ta5 nickel-based superalloy was produced by vacuum induction melting followed by homogenization, hot forging, solution treatment, and aging to investigate its microstructural and mechanical behavior. The X Ray Fluorescence (XRF) analysis confirmed excellent agreement between the nominal and experimental chemical compositions. The X Ray Diffraction(XRD) combined with Rietveld refinement revealed a microstructure dominated by three closely related to face-centered cubic (FCC) (A1) solid-solution regions with slightly different lattice parameters, indicating local compositional variations. The Scanning Electron Microscopy(SEM)/Energy Dispersive Spectroscopy (EDS) observations showed a generally homogeneous elemental distribution, while optical and electron microscopy identified a dendritic microstructure with elongated interdendritic constituents enriched in refractory elements. Mechanical characterization yielded an average hardness of 497 HV0.5, a compressive strength of approximately 1950 MPa, and room-temperature yield and ultimate tensile strengths of 1050 MPa and 1320 MPa, respectively. Tensile strength gradually decreased with increasing temperature up to 900 °C, while ductility increased from 16% to 25% total elongation. The results indicate that the alloy develops a stable FCC matrix primarily strengthened by solid-solution hardening, with the measured mechanical performance suggesting an additional contribution from precipitation hardening. This study provides an experimental baseline for the development and optimization of conventionally processed Ni–Cr–Mo–Nb–Ta superalloys for high-temperature applications.
- Open Access
- 26 June 2026
- Published by MDPI AG in Preprints.org
Microstructural and Compositional Analysis of the Ni–Cr–Mo–Nb–Ta Superalloy with High Stability at High Temperatures
This article analyzes in detail the structural, thermal and mechanical properties of the Ni₅₄Cr₂₈Mo₈Nb₅Ta₅ alloy, as well identify potential applications in areas where exceptional high-temperature performance is required — such as gas turbines, nuclear reactors or aeronautical engine components. Obtaining a very good correlation between the experimental and fitted profiles, as well as the low values of the error parameters (R-factors), confirms the accuracy of the structural model and the validity of the phases identified following the XRD analysis. The study also aims to highlight the relationship between chemical composition, microstructure and mechanical behavior, providing a basis for optimizing heat treatments and manufacturing processes of this advanced superalloy.
- 26 June 2026
- Published by MDPI AG in Preprints.org
Open AccessMicrostructural and Compositional Analysis of the Ni–Cr–Mo–Nb–Ta Superalloy with High Stability at High Temperatures
This article analyzes in detail the structural, thermal and mechanical properties of the Ni₅₄Cr₂₈Mo₈Nb₅Ta₅ alloy, as well identify potential applications in areas where exceptional high-temperature performance is required — such as gas turbines, nuclear reactors or aeronautical engine components. Obtaining a very good correlation between the experimental and fitted profiles, as well as the low values of the error parameters (R-factors), confirms the accuracy of the structural model and the validity of the phases identified following the XRD analysis. The study also aims to highlight the relationship between chemical composition, microstructure and mechanical behavior, providing a basis for optimizing heat treatments and manufacturing processes of this advanced superalloy.