Nicolas Gorius
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Nicolas Gorius has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
Bart Vandenbussche
10 shared publicationsDemetrio Magrin
10 shared publicationsIsabella Pagano
10 shared publicationsShahid Aslam
NASA Goddard Space Flight Center, Planetary Systems Branch
9 shared publicationsGonzalo Ramos Zapata
8 shared publicationsClaudio Arena
7 shared publications
Latest Publications
- Open Access
Assessment of PLATO Science Performance
The PLATO mission is scheduled for launch early 2027. In this paper we present an overview of the performance drivers for the mission at the time where all flight models of the cameras have been tested and integrated on the optical bench. The PLATO consortium needs an estimate of the planet detection yield to dimension the ground-based radial velocity follow-up resources. We provide updated estimates on the yield of planet detections that can be expected from the mission under certain assumptions. As of today, large uncertainties remain on the planet occurrence rates, especially for small planets in long-period orbits, and on our ability to detect these planets in the presence of stellar variability and instrumental noise. To partially overcome these limitations, we compare results using different planet occurrence rates, detectability rates, and we include an estimate on the expected contribution of stellar variability to the noise budget. The final detection yield of PLATO will provide constraints to planet occurrence rates which in turn will help constraining planet formation models.
Open AccessAssessment of PLATO Science Performance
The PLATO mission is scheduled for launch early 2027. In this paper we present an overview of the performance drivers for the mission at the time where all flight models of the cameras have been tested and integrated on the optical bench. The PLATO consortium needs an estimate of the planet detection yield to dimension the ground-based radial velocity follow-up resources. We provide updated estimates on the yield of planet detections that can be expected from the mission under certain assumptions. As of today, large uncertainties remain on the planet occurrence rates, especially for small planets in long-period orbits, and on our ability to detect these planets in the presence of stellar variability and instrumental noise. To partially overcome these limitations, we compare results using different planet occurrence rates, detectability rates, and we include an estimate on the expected contribution of stellar variability to the noise budget. The final detection yield of PLATO will provide constraints to planet occurrence rates which in turn will help constraining planet formation models.
- Open Access
- 1 January 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 12 (01) , 1-20
Convolutional neural network design for the prediction of the focusing temperature of PLATO telescopes under simulated space operating conditions
The main science goal of the PLAnetary Transits and Oscillations of stars mission is to detect and characterize extrasolar planets around solar-type stars. For this purpose, the telescopes developed for the mission have a focusing system consisting on to tune the thermal surrounding of the opto-mechanics for achieving the optimal focus. We propose an alternative method for determining the best focus temperature. We designed a convolutional neural network that uses images obtained in ground performance evaluation to implement a calibration method to be used during pre-launch tests and orbital tuning. The convolutional neural network effectively predicts focusing temperatures, improving calibration efficiency and accuracy. This approach demonstrates the potential of artificial intelligence methods for optimizing telescope focusing in operational conditions.
- 1 January 2026
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 12 (01) , 1-20
Open AccessConvolutional neural network design for the prediction of the focusing temperature of PLATO telescopes under simulated space operating conditions
The main science goal of the PLAnetary Transits and Oscillations of stars mission is to detect and characterize extrasolar planets around solar-type stars. For this purpose, the telescopes developed for the mission have a focusing system consisting on to tune the thermal surrounding of the opto-mechanics for achieving the optimal focus. We propose an alternative method for determining the best focus temperature. We designed a convolutional neural network that uses images obtained in ground performance evaluation to implement a calibration method to be used during pre-launch tests and orbital tuning. The convolutional neural network effectively predicts focusing temperatures, improving calibration efficiency and accuracy. This approach demonstrates the potential of artificial intelligence methods for optimizing telescope focusing in operational conditions.
- Top Cited PapersOpen Access
- 21 April 2025
- Published by Springer Nature in Experimental Astronomy
- Vol. 59 (3)
The PLATO mission
PLATO (PLAnetary Transits and Oscillations of stars) is ESA’s M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2R $$_\textrm{Earth}$$ ) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5%, 10%, 10% for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO‘s target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile towards the end of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.- 21 April 2025
- Published by Springer Nature in Experimental Astronomy
- Vol. 59 (3)
Top Cited PapersOpen AccessThe PLATO mission
PLATO (PLAnetary Transits and Oscillations of stars) is ESA’s M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2R $$_\textrm{Earth}$$ ) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5%, 10%, 10% for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO‘s target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile towards the end of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases. - Open Access
The PLATO Mission
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.
Open AccessThe PLATO Mission
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13099, 51-324
Status of the PLATO camera product assurance activities and their management
PLATO (PLAnetary Transits and Oscillations of stars) is an M3 medium-class space mission in ESA’s Cosmic Vision program devoted to detecting and studying a large number of extrasolar planetary systems. Its launch is planned for the end of 2026 from Europe’s Spaceport in French Guiana. The PLATO Payload consists of 26 wide field-of-view Cameras, each observing a specific part of the sky, associated data processing units and power supply units. The 24 Normal-Cameras will provide a very high-resolution photometric measurement of light from a large number of stars, while the other two Fast Cameras will provide the colour information and will deliver the pointing data to the AOCS (Attitude and Orbital Control System). The Cameras will be integrated into an optical bench. Each of them is composed of the Telescope Optical Unit (TOU), the Focal Plane Assembly (FPA) and the Front-End Electronics (FEE). Currently, the serial production of the Cameras has already started facing critical key points, non-conformities and challenging problems. The status of the Product Assurance activities during the serial production for which the first flight models are being delivered after the AIT phase is reported.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13099, 51-324
Status of the PLATO camera product assurance activities and their management
PLATO (PLAnetary Transits and Oscillations of stars) is an M3 medium-class space mission in ESA’s Cosmic Vision program devoted to detecting and studying a large number of extrasolar planetary systems. Its launch is planned for the end of 2026 from Europe’s Spaceport in French Guiana. The PLATO Payload consists of 26 wide field-of-view Cameras, each observing a specific part of the sky, associated data processing units and power supply units. The 24 Normal-Cameras will provide a very high-resolution photometric measurement of light from a large number of stars, while the other two Fast Cameras will provide the colour information and will deliver the pointing data to the AOCS (Attitude and Orbital Control System). The Cameras will be integrated into an optical bench. Each of them is composed of the Telescope Optical Unit (TOU), the Focal Plane Assembly (FPA) and the Front-End Electronics (FEE). Currently, the serial production of the Cameras has already started facing critical key points, non-conformities and challenging problems. The status of the Product Assurance activities during the serial production for which the first flight models are being delivered after the AIT phase is reported.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13099, 22-211
The TOU of the PLATO mission: product assurance management during flight models production
Within the ESA PLATO M3 mission, the Telescope Optical Unit (TOU), i.e. the opto-mechanical unit, is a fully refractive optical system. The 26 TOU Flight Models (FM) to be delivered to the upper level, the PLATO Camera, make it a series production. The first Flight Models production faced many initial challenges from a Product Assurance point of view, mostly related to MAIT activities, while moving forward these challenges decreased. Discrepancies and nonconformities associated with, mainly, but not only, materials and processes, cleanliness and contamination control, safety, qualifications and validations, are the object of this proceeding. Thus, showing that serial production adds one more variable to possible failures, but at the same time, when root causes are corrected and solved, yields less difficulties in subsequent FMs MAIT and final production. Product Assurance, in monitoring the product in failure-proofing aspects, aims at mitigating criticalities and arranging for corrective and preventive actions that allow improving the likelihood of success of the mission.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- Vol. 13099, 22-211
The TOU of the PLATO mission: product assurance management during flight models production
Within the ESA PLATO M3 mission, the Telescope Optical Unit (TOU), i.e. the opto-mechanical unit, is a fully refractive optical system. The 26 TOU Flight Models (FM) to be delivered to the upper level, the PLATO Camera, make it a series production. The first Flight Models production faced many initial challenges from a Product Assurance point of view, mostly related to MAIT activities, while moving forward these challenges decreased. Discrepancies and nonconformities associated with, mainly, but not only, materials and processes, cleanliness and contamination control, safety, qualifications and validations, are the object of this proceeding. Thus, showing that serial production adds one more variable to possible failures, but at the same time, when root causes are corrected and solved, yields less difficulties in subsequent FMs MAIT and final production. Product Assurance, in monitoring the product in failure-proofing aspects, aims at mitigating criticalities and arranging for corrective and preventive actions that allow improving the likelihood of success of the mission.
- Open Access
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- p. 78
Emergency protocol activation at INTA as test house for PLATO: saving PLATO CAMs under unexpected events
Access SPIE's growing collection of conference proceeding papers from around the globe. Browse by the latest conferences or optics-based technology.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- p. 78
Open AccessEmergency protocol activation at INTA as test house for PLATO: saving PLATO CAMs under unexpected events
Access SPIE's growing collection of conference proceeding papers from around the globe. Browse by the latest conferences or optics-based technology.
- Open Access
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- p. 300
INTA as test house for PLATO: telescope flight model TVAC testing and calibration first results
Access SPIE's growing collection of conference proceeding papers from around the globe. Browse by the latest conferences or optics-based technology.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- p. 300
Open AccessINTA as test house for PLATO: telescope flight model TVAC testing and calibration first results
Access SPIE's growing collection of conference proceeding papers from around the globe. Browse by the latest conferences or optics-based technology.
- Open Access
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- p. 44
PLATO: verification of in-orbit performances through STOP analysis
Access SPIE's growing collection of conference proceeding papers from around the globe. Browse by the latest conferences or optics-based technology.
- 23 August 2024
- Published by SPIE-Intl Soc Optical Eng
- p. 44
Open AccessPLATO: verification of in-orbit performances through STOP analysis
Access SPIE's growing collection of conference proceeding papers from around the globe. Browse by the latest conferences or optics-based technology.