Jianjun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianjun Li has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Bowen Sun
National Synchrotron Radiation Laboratory School of Nuclear Science and Technology University of Science and Technology of China Hefei Anhui People's Republic of China
3 shared publicationsChengyu Li
National Synchrotron Radiation Laboratory School of Nuclear Science and Technology University of Science and Technology of China Hefei Anhui People's Republic of China
3 shared publications- Chongwen Zou
National Synchrotron Radiation Laboratory School of Nuclear Science and Technology University of Science and Technology of China Hefei Anhui China
3 shared publications - Ting Zhou
National Synchrotron Radiation Laboratory School of Nuclear Science and Technology University of Science and Technology of China Hefei Anhui China
3 shared publications Chang Wang
National Synchrotron Radiation Laboratory School of Nuclear Science and Technology University of Science and Technology of China Hefei Anhui People's Republic of China
2 shared publications- Jinglin Zhu
National Synchrotron Radiation Laboratory School of Nuclear Science and Technology University of Science and Technology of China Hefei Anhui China
2 shared publications
Latest Publications
- 17 September 2026
- Published by Wiley in Laser & Photonics Reviews
- p. e71913
Ultra‐High Contrast Terahertz Modulation and Pixelated Display Based on VO 2 Metasurface
The development of high‐performance, dynamically reconfigurable devices is important for advancing Terahertz (THz) technology. Vanadium dioxide (VO 2 ), a metal‐insulator transition oxide with a near‐room‐temperature critical point, is promising for infrared (IR) and THz modulation. However, achieving simultaneous high transmission in the ON state, deep suppression in the OFF state, and electrical programmability in a broadband THz device remains challenging. Here, we propose an electrically controlled VO 2 THz metasurface that overcomes these limitations. Our design yields an ultra‐high transmission switching ratio of 10 000 at 0.88 THz in simulation and a broad bandwidth from 0.2 to 1.3 THz (switching ratio >100). It maintains a high transmission of 0.85 in the insulating state while suppressing transmission to ∼10 −4 in the metallic state, corresponding to a modulation depth exceeding 99.9%. Based on the multiple THz transmission levels, we demonstrate a proof‐of‐concept reconfigurable pixelated display, which highlights the potential of our high‐contrast metasurface for THz spatial light modulation applications. By integrating our VO 2 metasurface with a Ni/Pt bilayer for electrical gating of spintronic THz emission, a compact, amplitude‐modulated THz source is fabricated. Our work establishes a robust platform for high‐performance, programmable THz devices, bridging the gap between static meta‐materials and dynamic photonic systems for imaging, communications, and integrated applications.
- 17 September 2026
- Published by Wiley in Laser & Photonics Reviews
- p. e71913
Ultra‐High Contrast Terahertz Modulation and Pixelated Display Based on VO 2 Metasurface
The development of high‐performance, dynamically reconfigurable devices is important for advancing Terahertz (THz) technology. Vanadium dioxide (VO 2 ), a metal‐insulator transition oxide with a near‐room‐temperature critical point, is promising for infrared (IR) and THz modulation. However, achieving simultaneous high transmission in the ON state, deep suppression in the OFF state, and electrical programmability in a broadband THz device remains challenging. Here, we propose an electrically controlled VO 2 THz metasurface that overcomes these limitations. Our design yields an ultra‐high transmission switching ratio of 10 000 at 0.88 THz in simulation and a broad bandwidth from 0.2 to 1.3 THz (switching ratio >100). It maintains a high transmission of 0.85 in the insulating state while suppressing transmission to ∼10 −4 in the metallic state, corresponding to a modulation depth exceeding 99.9%. Based on the multiple THz transmission levels, we demonstrate a proof‐of‐concept reconfigurable pixelated display, which highlights the potential of our high‐contrast metasurface for THz spatial light modulation applications. By integrating our VO 2 metasurface with a Ni/Pt bilayer for electrical gating of spintronic THz emission, a compact, amplitude‐modulated THz source is fabricated. Our work establishes a robust platform for high‐performance, programmable THz devices, bridging the gap between static meta‐materials and dynamic photonic systems for imaging, communications, and integrated applications.
- Open Access
- 19 August 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (33) , e71623
Decoupled Control of Mid‐Infrared and Near‐Infrared Light in a Hybrid VO 2 ‐Photonic Crystal Platform for Multifunctional Optical Applications
Multispectral modulation materials are crucial for managing electromagnetic waves and are highly desirable in the near‐infrared (NIR) and mid‐infrared (MIR) regions. However, achieving effective control of both bands in a single structure remains a major challenge. Here, we propose a multilayer structure with a VO 2 phase‐change layer and a 1D photonic crystal (PC) layer, capable of dynamic MIR switching and stable NIR high‐reflection protection. The device has an initial transmittance of up to 83% in the MIR range and drops to less than 1% after the phase change, with a relative modulation depth of 99%, satisfying the needs of various civil communication and detection systems. Meanwhile, it maintains a high reflectance of 80% around 1.06 µm both in the spectrum and under actual conditions for protection. The top PC layer can also generate tunable structural colors in the visible range, expanding the potential for environmental camouflage. To further favor switching performance in the MIR band, an infrared‐absorbing carbon nanotube (CNT) layer is placed on top, reducing the laser‐driven phase‐change threshold in the MIR band. This work provides a simple strategy for multispectral modulation without complex meta‐surfaces and sets a new example for smart optical limiting and LiDAR stealth.
- 19 August 2026
- Published by Wiley in Advanced Optical Materials
- Vol. 14 (33) , e71623
Open AccessDecoupled Control of Mid‐Infrared and Near‐Infrared Light in a Hybrid VO 2 ‐Photonic Crystal Platform for Multifunctional Optical Applications
Multispectral modulation materials are crucial for managing electromagnetic waves and are highly desirable in the near‐infrared (NIR) and mid‐infrared (MIR) regions. However, achieving effective control of both bands in a single structure remains a major challenge. Here, we propose a multilayer structure with a VO 2 phase‐change layer and a 1D photonic crystal (PC) layer, capable of dynamic MIR switching and stable NIR high‐reflection protection. The device has an initial transmittance of up to 83% in the MIR range and drops to less than 1% after the phase change, with a relative modulation depth of 99%, satisfying the needs of various civil communication and detection systems. Meanwhile, it maintains a high reflectance of 80% around 1.06 µm both in the spectrum and under actual conditions for protection. The top PC layer can also generate tunable structural colors in the visible range, expanding the potential for environmental camouflage. To further favor switching performance in the MIR band, an infrared‐absorbing carbon nanotube (CNT) layer is placed on top, reducing the laser‐driven phase‐change threshold in the MIR band. This work provides a simple strategy for multispectral modulation without complex meta‐surfaces and sets a new example for smart optical limiting and LiDAR stealth.
- 9 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (28) , 39083-39092
Low-Cost and Scalable Flexible Infrared Detectors Based on VO 2 (B) Nano-Ink: From Single-Device Sensing to Array Imaging
Vanadium oxide (VOx)-based uncooled infrared (IR) microbolometers have been commercially used in thermal sensing and imaging owing to their compact form factor, low power consumption, and high operational stability. However, the intrinsically low temperature coefficient of resistance (TCR) value of VOx compound, nonflexible devices, and costly fabrication processes remain critical bottlenecks for a wearable IR device or other specific applications. Here, we prepare a flexible IR thermal detector with VO2(B) nanosheet ink via a facile and scalable drop-casting strategy. Due to the achieved high TCR of VO2(B) up to 4.57% K-1 at room temperature, the IR device shows the responsivity of 9.84 A/W and a specific detectivity of 3.27 × 108 Jones at room temperature. This flexible IR sensor is utilized for respiratory rate monitoring, which demonstrates stable and sensitive performance. A prototype for noncontact digital IR imaging is realized through integration into a 5 × 5 flexible printed circuit array, showing the great potential for fabricating large-scale and high-pixel flexible IR detectors. Our work not only establishes a low-cost and scalable materials-to-device integration strategy for flexible IR thermal sensing but also paves the way for VO2(B)-based systems for next-generation wearable and large-area infrared imaging technologies.
- 9 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (28) , 39083-39092
Low-Cost and Scalable Flexible Infrared Detectors Based on VO 2 (B) Nano-Ink: From Single-Device Sensing to Array Imaging
Vanadium oxide (VOx)-based uncooled infrared (IR) microbolometers have been commercially used in thermal sensing and imaging owing to their compact form factor, low power consumption, and high operational stability. However, the intrinsically low temperature coefficient of resistance (TCR) value of VOx compound, nonflexible devices, and costly fabrication processes remain critical bottlenecks for a wearable IR device or other specific applications. Here, we prepare a flexible IR thermal detector with VO2(B) nanosheet ink via a facile and scalable drop-casting strategy. Due to the achieved high TCR of VO2(B) up to 4.57% K-1 at room temperature, the IR device shows the responsivity of 9.84 A/W and a specific detectivity of 3.27 × 108 Jones at room temperature. This flexible IR sensor is utilized for respiratory rate monitoring, which demonstrates stable and sensitive performance. A prototype for noncontact digital IR imaging is realized through integration into a 5 × 5 flexible printed circuit array, showing the great potential for fabricating large-scale and high-pixel flexible IR detectors. Our work not only establishes a low-cost and scalable materials-to-device integration strategy for flexible IR thermal sensing but also paves the way for VO2(B)-based systems for next-generation wearable and large-area infrared imaging technologies.