CDCarolina Díaz-Vecino

Carolina Díaz-Vecino

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carolina Díaz-Vecino has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comment on egusphere-2026-4051

    by Carolina Díaz-Vecino, Jonathan Lemus, Allan Fries, Riccardo Simionato, Simon Thivet, Simona Scollo, Francesco Amadio, Laura Pioli, Alexandros Panagiotis Poulidis, Valentin Freret-Lorgeril, et al.

    Ash fingers are descending particle-laden plumes that develop beneath volcanic clouds and have been observed during several explosive eruptions worldwide. By promoting collective settling, they modify the atmospheric transport and deposition of volcanic ash and remain a significant source of uncertainty in tephra-dispersal forecasting. However, direct measurements of ash-finger properties are rare, and their depositional signature remains poorly constrained. Here, we investigate ash fingers generated during the 23 July 2024 paroxysmal eruption of Mt. Etna (Italy) using high-resolution visible-wavelength video observations, detailed deposit characterization from ground-based and drone-collected samples, thin-section analyses, disdrometer observations and numerical simulations. The resulting deposit is dominated by coarse ash and shows no evidence of aggregation, providing a unique opportunity to isolate the influence of ash fingers on sedimentation processes. Our observations demonstrate that ash fingers can develop in the absence of abundant fine ash ( 2.5 × 10⁵ kg s⁻¹). Deposit analyses show that ash fingers locally modified proximal sedimentation by increasing the proportion of coarse ash and shifting grain-size distributions toward finer values than expected from individual particle settling. In contrast, simulations of TEPHRA 2, a tephra dispersion model, predict only minor differences between scenarios with and without ash-finger settling. This limited sensitivity could arise because the model assumes spherical particles, leading to an underestimation of the grain-size fraction susceptible to ash-finger entrainment. The discrepancy highlights a fundamental limitation of standard dispersal models based on the assumption of individual settling of spherical particles and suggests that particle morphology must be explicitly considered to realistically represent ash-finger transport and deposition. These findings provide new constraints on ash-finger dynamics and demonstrate that particle shape exerts a first-order control on the interaction between collective sedimentation processes and tephra deposition, with important implications for volcanic ash forecasting and hazard assessment.

  • Open Access

    Supplementary material to "Ash Fingers Modify Tephra Sedimentation During a Coarse-Ash-Dominated Eruption: Evidence from the 23 July 2024 Etna Paroxysm"

    by Carolina Díaz-Vecino, Jonathan Lemus, Allan Fries, Riccardo Simionato, Simon Thivet, Simona Scollo, Francesco Amadio, Laura Pioli, Alexandros Panagiotis Poulidis, Valentin Freret-Lorgeril, et al.

  • Open Access

    Ash Fingers Modify Tephra Sedimentation During a Coarse-Ash-Dominated Eruption: Evidence from the 23 July 2024 Etna Paroxysm

    by Carolina Díaz-Vecino, Jonathan Lemus, Allan Fries, Riccardo Simionato, Simon Thivet, Simona Scollo, Francesco Amadio, Laura Pioli, Alexandros Panagiotis Poulidis, Valentin Freret-Lorgeril, et al.

    Ash fingers are descending particle-laden plumes that develop beneath volcanic clouds and have been observed during several explosive eruptions worldwide. By promoting collective settling, they modify the atmospheric transport and deposition of volcanic ash and remain a significant source of uncertainty in tephra-dispersal forecasting. However, direct measurements of ash-finger properties are rare, and their depositional signature remains poorly constrained. Here, we investigate ash fingers generated during the 23 July 2024 paroxysmal eruption of Mt. Etna (Italy) using high-resolution visible-wavelength video observations, detailed deposit characterization from ground-based and drone-collected samples, thin-section analyses, disdrometer observations and numerical simulations. The resulting deposit is dominated by coarse ash and shows no evidence of aggregation, providing a unique opportunity to isolate the influence of ash fingers on sedimentation processes. Our observations demonstrate that ash fingers can develop in the absence of abundant fine ash ( 2.5 × 10⁵ kg s⁻¹). Deposit analyses show that ash fingers locally modified proximal sedimentation by increasing the proportion of coarse ash and shifting grain-size distributions toward finer values than expected from individual particle settling. In contrast, simulations of TEPHRA 2, a tephra dispersion model, predict only minor differences between scenarios with and without ash-finger settling. This limited sensitivity could arise because the model assumes spherical particles, leading to an underestimation of the grain-size fraction susceptible to ash-finger entrainment. The discrepancy highlights a fundamental limitation of standard dispersal models based on the assumption of individual settling of spherical particles and suggests that particle morphology must be explicitly considered to realistically represent ash-finger transport and deposition. These findings provide new constraints on ash-finger dynamics and demonstrate that particle shape exerts a first-order control on the interaction between collective sedimentation processes and tephra deposition, with important implications for volcanic ash forecasting and hazard assessment.

  • Open Access

    Comment on egusphere-2026-4353

    by Riccardo Simionato, Allan Fries, Simon Thivet, Jonathan Lemus, Carolina Díaz-Vecino, Frederic Arlaud, Simona Scollo, Costanza Bonadonna

    Monitoring and forecasting volcanic processes are crucial for detecting, characterising, and assessing associated hazards. However, advanced monitoring tools, such as thermal cameras, can be expensive and unavailable in many monitoring networks. To address this, a cost-effective visible wavelength camera network has been developed to capture high resolution imagery for volcano monitoring and research. This network provides continuous, automated image acquisition from different locations around a volcanic edifice. Each camera node is equipped with a Raspberry Pi computer board, one or two Raspberry Pi Camera Module 3 cameras, and a waterproof and dustproof box for deployment in challenging outdoor environments, with an estimated cost of approximately EUR 152–257 per unit, depending on the hardware configuration. The system supports diverse configurations, including adjustable capture intervals and resolutions, to meet various observational needs. The network adapts its operation based on environmental conditions, automatically selecting the shutter speed during daylight and using specific settings at night. Acquired data can be transferred in near real time to a server for archival and, potentially, analysis for monitoring purposes. In this study, we present a long-term camera monitoring network deployed at Mt. Etna, together with short-term deployments at Stromboli, the Geneva Jet d'Eau as a calibrated experiment, and laboratory experiments. These case studies demonstrate the long-term reliability of the system for capturing images over extended periods under variable lighting and weather conditions, including high temperatures, snow, rain, and tephra fallout, as well as its suitability as a temporary observation tool for field campaigns or laboratory setups. By using open source hardware and software, this camera network provides a flexible and accessible tool for volcano monitoring and research applications. When paired with cellular connectivity and solar panels or battery packs, the system could be integrated into multisensor monitoring networks, including in remote areas and challenging outdoor environments. Although developed for volcano monitoring, the framework can be adapted to other natural and environmental processes requiring persistent or high temporal resolution visual observations.

  • Open Access

    Supplementary material to "A cost-effective, open source, high resolution visible wavelength camera network: design and applications for long-term monitoring and research in volcanology"

    by Riccardo Simionato, Allan Fries, Simon Thivet, Jonathan Lemus, Carolina Díaz-Vecino, Frederic Arlaud, Simona Scollo, Costanza Bonadonna

  • Open Access

    A cost-effective, open source, high resolution visible wavelength camera network: design and applications for long-term monitoring and research in volcanology

    by Riccardo Simionato, Allan Fries, Simon Thivet, Jonathan Lemus, Carolina Díaz-Vecino, Frederic Arlaud, Simona Scollo, Costanza Bonadonna

    Monitoring and forecasting volcanic processes are crucial for detecting, characterising, and assessing associated hazards. However, advanced monitoring tools, such as thermal cameras, can be expensive and unavailable in many monitoring networks. To address this, a cost-effective visible wavelength camera network has been developed to capture high resolution imagery for volcano monitoring and research. This network provides continuous, automated image acquisition from different locations around a volcanic edifice. Each camera node is equipped with a Raspberry Pi computer board, one or two Raspberry Pi Camera Module 3 cameras, and a waterproof and dustproof box for deployment in challenging outdoor environments, with an estimated cost of approximately EUR 152–257 per unit, depending on the hardware configuration. The system supports diverse configurations, including adjustable capture intervals and resolutions, to meet various observational needs. The network adapts its operation based on environmental conditions, automatically selecting the shutter speed during daylight and using specific settings at night. Acquired data can be transferred in near real time to a server for archival and, potentially, analysis for monitoring purposes. In this study, we present a long-term camera monitoring network deployed at Mt. Etna, together with short-term deployments at Stromboli, the Geneva Jet d'Eau as a calibrated experiment, and laboratory experiments. These case studies demonstrate the long-term reliability of the system for capturing images over extended periods under variable lighting and weather conditions, including high temperatures, snow, rain, and tephra fallout, as well as its suitability as a temporary observation tool for field campaigns or laboratory setups. By using open source hardware and software, this camera network provides a flexible and accessible tool for volcano monitoring and research applications. When paired with cellular connectivity and solar panels or battery packs, the system could be integrated into multisensor monitoring networks, including in remote areas and challenging outdoor environments. Although developed for volcano monitoring, the framework can be adapted to other natural and environmental processes requiring persistent or high temporal resolution visual observations.

  • Open Access

    In situ volcanic ash sampling and aerosol–gas analysis based on UAS technologies (AeroVolc)

    by Simon Thivet, Gholamhossein Bagheri, Przemyslaw M. Kornatowski, Allan Fries, Jonathan Lemus, Riccardo Simionato, Carolina Díaz-Vecino, Eduardo Rossi, Taishi Yamada, Simona Scollo, et al.

    Volcanic degassing and explosive eruptions inject significant amounts of gas and ash into the atmosphere, impacting the local environment and atmospheric dynamics from local to global scales. While ground- and satellite-based remote-sensing systems are key to describing explosive volcanism and assessing associated hazards, direct in situ measurements inside volcanic clouds are not possible with these methods. This study presents an innovative approach using an unoccupied aircraft system (UAS) for (i) airborne ash sampling and (ii) measurements of aerosol and gas concentrations (AeroVolc system). Commercial instruments (DJI™ Matrice 30 UAV, Alphasense™ N3 optical particle counter, and Soarability™ Sniffer4D Mini2 multigas hardware) were combined with custom-built ash collectors and particle counters to enable a more detailed analysis of volcanic clouds. Here, we showcase the deployment of our UAS on Sakurajima (Japan) and Etna (Italy), two volcanoes known for their frequent explosive eruptions and persistent degassing activity, to demonstrate how this approach enables in situ, high-resolution sample and data collection within challenging environments. Results provide grain size distributions (GSDs), information on the occurrence of particle aggregation, and solid aerosol (PM1, PM2.5, and PM10, corresponding to solid aerosol particles with a diameter of less than 1, 2.5, and 10 µm, respectively) and gas (SO2 and CO2) concentrations. Depending on whether the UAS was operated within or below ash- and/or gas-rich clouds, different insights were gained that open up new perspectives for volcanological research. These insights include the composition, concentration, generation, dispersion, and sedimentation patterns of volcanic clouds.