Bo Kong
Bo Kong has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Qitai Eri
2 shared publicationsChunyu Lin
1 shared publicationJiaan Liu
1 shared publication- Jifeng Huang1 shared publication
Xu Sun
1 shared publicationYong Wang
1 shared publication
Latest Publications
- Open Access
- 12 August 2026
- Published by Elsevier in SSRN Electronic Journal
Cost-Aware Multi-Fidelity Optimization of Exhaust Systems for Aerodynamic Performance and Infrared Low Observability
Strong coupling and trade-off exist between the aerodynamic and infrared low-observable performances of aero-engine exhaust systems, which are determined by nozzle expansion and cooling-flow mixing, together with wall temperature, geometric shielding, and surface emissivity. Numerical optimization is costly because accurate aerodynamic and infrared predictions both require high-fidelity simulations. This study develops an aerodynamic–infrared coupled design framework that simultaneously considers geometric, cooling, and emissivity parameters. A cost-aware multi-fidelity optimization method is proposed to identify the target fidelity Pareto front under a limited computational budget. Multi-fidelity Gaussian-process models integrate aerodynamic and infrared data obtained at different mesh resolutions, while the acquisition criterion selects both the design and fidelity according to the expected Pareto improvement and evaluation cost. The Pareto solutions show that a nearly fully expanded exhaust flow increases the thrust coefficient but maintains a longer high-temperature plume core. Stronger cooling flow mixing shortens this core but increases aerodynamic losses. The infrared signature can be further reduced by applying low-emissivity coatings to high-temperature visible walls and high-emissivity coatings to low-temperature walls. Upon reaching 95% of the maximum hypervolume, the proposed method requires 18.2% – 37.5% less computational cost than traditional single-fidelity method. The optimization framework reduces the cost of Pareto-front identification while clarifying the flow and radiation mechanisms governing aerodynamic–infrared trade-offs.
- 12 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCost-Aware Multi-Fidelity Optimization of Exhaust Systems for Aerodynamic Performance and Infrared Low Observability
Strong coupling and trade-off exist between the aerodynamic and infrared low-observable performances of aero-engine exhaust systems, which are determined by nozzle expansion and cooling-flow mixing, together with wall temperature, geometric shielding, and surface emissivity. Numerical optimization is costly because accurate aerodynamic and infrared predictions both require high-fidelity simulations. This study develops an aerodynamic–infrared coupled design framework that simultaneously considers geometric, cooling, and emissivity parameters. A cost-aware multi-fidelity optimization method is proposed to identify the target fidelity Pareto front under a limited computational budget. Multi-fidelity Gaussian-process models integrate aerodynamic and infrared data obtained at different mesh resolutions, while the acquisition criterion selects both the design and fidelity according to the expected Pareto improvement and evaluation cost. The Pareto solutions show that a nearly fully expanded exhaust flow increases the thrust coefficient but maintains a longer high-temperature plume core. Stronger cooling flow mixing shortens this core but increases aerodynamic losses. The infrared signature can be further reduced by applying low-emissivity coatings to high-temperature visible walls and high-emissivity coatings to low-temperature walls. Upon reaching 95% of the maximum hypervolume, the proposed method requires 18.2% – 37.5% less computational cost than traditional single-fidelity method. The optimization framework reduces the cost of Pareto-front identification while clarifying the flow and radiation mechanisms governing aerodynamic–infrared trade-offs.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Numerical Investigation of Fluidic Injection for Supersonic Jet Control and its Infrared Radiation Characteristics
Suppression of the infrared radiation generated by the jet plumes is of great significance to improve the survivability of military aircraft. In this study, a supersonic jet controlled by fluidic injection for mixing enhancement and infrared suppression was numerically investigated. The Reynolds-averaged Navier-Stokes approach was validated by previous experimental results. The effect of injection mass flow rate was researched in detail. The injection of control jets was found to modify the shock structures of the primary jet. Bow shock was established in front of the control jet and the strength and number of subsequent shock cells were both reduced. The mixing capability in the near field in the injection direction was promoted because of the streamwise vortexes introduced by the control jet. But the Mach disk in the control jet caused reduced momentum and diminished the benefit of higher injection mass flow rate. Investigation of the infrared radiation showed that the radiation intensity perpendicular to the injection direction was reduced by a maximum of 24% due to compression of the visible area of the potential core. Parallel to the injection direction, the maximum reduction was 17%, mainly owing to the increased mixing capability leading to a thicker shear layer.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessNumerical Investigation of Fluidic Injection for Supersonic Jet Control and its Infrared Radiation Characteristics
Suppression of the infrared radiation generated by the jet plumes is of great significance to improve the survivability of military aircraft. In this study, a supersonic jet controlled by fluidic injection for mixing enhancement and infrared suppression was numerically investigated. The Reynolds-averaged Navier-Stokes approach was validated by previous experimental results. The effect of injection mass flow rate was researched in detail. The injection of control jets was found to modify the shock structures of the primary jet. Bow shock was established in front of the control jet and the strength and number of subsequent shock cells were both reduced. The mixing capability in the near field in the injection direction was promoted because of the streamwise vortexes introduced by the control jet. But the Mach disk in the control jet caused reduced momentum and diminished the benefit of higher injection mass flow rate. Investigation of the infrared radiation showed that the radiation intensity perpendicular to the injection direction was reduced by a maximum of 24% due to compression of the visible area of the potential core. Parallel to the injection direction, the maximum reduction was 17%, mainly owing to the increased mixing capability leading to a thicker shear layer.