Muhammad Ilham
Research Subjects
Research Interests
Muhammad Ilham has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Fajri Prasetya
Bandung Institute of Technology
1 shared publication - Indah Rosidah Maemunah
Rokkasho Institute for Fusion Energy
1 shared publication - Ratna Dewi Syarifah
Universitas Jember
1 shared publication - Zaki Su'UD
Bandung Institute of Technology
1 shared publication
Latest Publications
- Open Access
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (8 (142)) , 19-29
Improved core performance through neutronic parameter optimization in a 300 MWTH UN-PuN fueled Gas-cooled Fast Reactor
The object of this study is the 300 MW Gas-cooled Fast Reactor (GFR) Small Modular Reactor (SMR) neutronic design using long-life UN-PuN fuel without refueling, optimized to minimize excess reactivity and maintain a stable reactivity profile throughout the reactor operating lifetime. The problem solved in this study is the identification of the impact of variations in the composition of UN-PuN fuel, core geometric shape, fuel fractions, and the addition of minor actinides and burnable poisons, so that the period of refueling 20 years with excess reactivity (%Δk/k) below 1%. The neutronic performance of homogeneous and heterogeneous GFR cores was evaluated using SRAC 2006 to identify an optimal configuration with %Δk/k below 10% throughout burnup, followed by the incorporation of minor actinides, burnable poisons, and Pu-239 to reduce %Δk/k below 1%. The determination of volume of the fuel fraction was also conducted, ranging from 40% to 65%. The results obtained show homogeneous core calculations showed that 10% Pu in UN-PuN fuel provided the optimal performance, maintaining criticality from the BoL to the EoL. The optimal heterogeneous core (F1 = 8%, F2 = 10%, F3 = 12%) achieved low excess reactivity and a maximum power density of 93.27 W/cm3. Among the core configurations, the pancake core exhibited the lowest maximum power density (93.09 W/cm3). Fuel fraction optimization indicated that criticality was maintained within the 50–65% range, with higher fuel fractions increasing reactivity. The addition of 0.3% Am, 0.3% Np-237, and 0.3% Pa-231 to the optimum heterogeneous core (F1 = 57.5%) resulted in a nearly critical reactor (k-eff ≈ 1). Further optimization using spent PWR plutonium containing 50% Pu-239 achieved a maximum k-eff of 1.00985 with an %Δk/k of only 0.975%. This finding can be a reference for building an SMR type GFR reactor with the lowest reactivity and long life without refueling
- 28 August 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (8 (142)) , 19-29
Open AccessImproved core performance through neutronic parameter optimization in a 300 MWTH UN-PuN fueled Gas-cooled Fast Reactor
The object of this study is the 300 MW Gas-cooled Fast Reactor (GFR) Small Modular Reactor (SMR) neutronic design using long-life UN-PuN fuel without refueling, optimized to minimize excess reactivity and maintain a stable reactivity profile throughout the reactor operating lifetime. The problem solved in this study is the identification of the impact of variations in the composition of UN-PuN fuel, core geometric shape, fuel fractions, and the addition of minor actinides and burnable poisons, so that the period of refueling 20 years with excess reactivity (%Δk/k) below 1%. The neutronic performance of homogeneous and heterogeneous GFR cores was evaluated using SRAC 2006 to identify an optimal configuration with %Δk/k below 10% throughout burnup, followed by the incorporation of minor actinides, burnable poisons, and Pu-239 to reduce %Δk/k below 1%. The determination of volume of the fuel fraction was also conducted, ranging from 40% to 65%. The results obtained show homogeneous core calculations showed that 10% Pu in UN-PuN fuel provided the optimal performance, maintaining criticality from the BoL to the EoL. The optimal heterogeneous core (F1 = 8%, F2 = 10%, F3 = 12%) achieved low excess reactivity and a maximum power density of 93.27 W/cm3. Among the core configurations, the pancake core exhibited the lowest maximum power density (93.09 W/cm3). Fuel fraction optimization indicated that criticality was maintained within the 50–65% range, with higher fuel fractions increasing reactivity. The addition of 0.3% Am, 0.3% Np-237, and 0.3% Pa-231 to the optimum heterogeneous core (F1 = 57.5%) resulted in a nearly critical reactor (k-eff ≈ 1). Further optimization using spent PWR plutonium containing 50% Pu-239 achieved a maximum k-eff of 1.00985 with an %Δk/k of only 0.975%. This finding can be a reference for building an SMR type GFR reactor with the lowest reactivity and long life without refueling