Yuhan Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuhan Sun has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Hao Guo
School of Chemical Engineering and Technology, Xinjiang University, Urumqi 830017, China
1 shared publication - Haoyu Wang
Xinjiang Key Laboratory of New Energy Materials and Green Chemical Engineering, College of Chemistry and Environmental Engineering, Xinjiang Institute of Engineering, Urumqi 830023, China
1 shared publication - Kui Deng
School of Chemical Engineering and Technology, Xinjiang University, Urumqi 830017, China
1 shared publication - Shijian Lu
School of Chemical Engineering and Technology, China University of Mining and Technology, Xuzhou 221116, China
1 shared publication - Wenye Deng
Xinjiang Key Laboratory of New Energy Materials and Green Chemical Engineering, College of Chemistry and Environmental Engineering, Xinjiang Institute of Engineering, Urumqi 830023, China
1 shared publication - Xiaoping Gong
Xinjiang Key Laboratory of New Energy Materials and Green Chemical Engineering, College of Chemistry and Environmental Engineering, Xinjiang Institute of Engineering, Urumqi 830023, China
1 shared publication
Latest Publications
- Open Access
- 10 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (22) , 11457
CO2 Mineralisation Performance of Fly Ash Modified with Calcium Sulphate Composite Flux
Coal-fired power plants produce large amounts of fly ash that occupy large land areas when stored and pose potential environmental risks. Hence, considerable attention has been drawn to the valorisation of this bulk solid waste, e.g., through CO2 mineralisation. High-alkali Xinjiang Zhundong coal fly ash has a high-silica, low-calcium composition and exhibits a low direct CO2 mineralisation efficiency due to the extensive polymerisation of silicon and aluminium components into an inert glass phase and the very low contents of active calcium and magnesium. In this study, this fly ash was thermochemically modified with a CaSO4 composite flux and used as a CO2 capture agent. The modification and mineralisation conditions were systematically varied to optimise the corresponding parameters (calcination temperature, calcination time, flux loading and flux ratio for modification; solid–liquid ratio, initial CO2 partial pressure and reaction temperature for mineralisation). Thermochemical modification promoted the transformation of inert fly ash components into active calcium silicate phases, with stable CaCO3 generated after mineralisation. Control experiments confirmed that the enhanced CO2 uptake primarily arises from the thermochemical reconstruction of fly ash silicates via calcium incorporation, rather than simple physical mixing with CaSO4. Under optimal mineralisation conditions (60 °C, 2 MPa and a solid–liquid ratio of 200 g/L), the modified fly ash achieved an apparent CO2 conversion rate of 95.82% and an apparent carbon sequestration capacity of 214.6 g CO2 kg−1 modified sample (429.2 g CO2 kg−1 original fly ash). The developed process overcomes the bottleneck of the insufficient carbon sequestration activity of high-silica, low-calcium fly ash, reduces the use of chemical reagents and provides a potential pathway for the valorisation of Xinjiang Zhundong coal fly ash and stable CO2 sequestration.
- 10 November 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (22) , 11457
Open AccessCO2 Mineralisation Performance of Fly Ash Modified with Calcium Sulphate Composite Flux
Coal-fired power plants produce large amounts of fly ash that occupy large land areas when stored and pose potential environmental risks. Hence, considerable attention has been drawn to the valorisation of this bulk solid waste, e.g., through CO2 mineralisation. High-alkali Xinjiang Zhundong coal fly ash has a high-silica, low-calcium composition and exhibits a low direct CO2 mineralisation efficiency due to the extensive polymerisation of silicon and aluminium components into an inert glass phase and the very low contents of active calcium and magnesium. In this study, this fly ash was thermochemically modified with a CaSO4 composite flux and used as a CO2 capture agent. The modification and mineralisation conditions were systematically varied to optimise the corresponding parameters (calcination temperature, calcination time, flux loading and flux ratio for modification; solid–liquid ratio, initial CO2 partial pressure and reaction temperature for mineralisation). Thermochemical modification promoted the transformation of inert fly ash components into active calcium silicate phases, with stable CaCO3 generated after mineralisation. Control experiments confirmed that the enhanced CO2 uptake primarily arises from the thermochemical reconstruction of fly ash silicates via calcium incorporation, rather than simple physical mixing with CaSO4. Under optimal mineralisation conditions (60 °C, 2 MPa and a solid–liquid ratio of 200 g/L), the modified fly ash achieved an apparent CO2 conversion rate of 95.82% and an apparent carbon sequestration capacity of 214.6 g CO2 kg−1 modified sample (429.2 g CO2 kg−1 original fly ash). The developed process overcomes the bottleneck of the insufficient carbon sequestration activity of high-silica, low-calcium fly ash, reduces the use of chemical reagents and provides a potential pathway for the valorisation of Xinjiang Zhundong coal fly ash and stable CO2 sequestration.