XLXuan Liu

Xuan Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuan Liu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Low-Temperature Plasma-Assisted Metallization of PTFE: A Focused Review

    by Meiyan Chen, Jinru Ou, Yue Zhang, Xuan Liu, Ke Yao, Xueping Geng, Deli Tang, Wei Zou, Fanya Jin, Jun Zhou

    Polytetrafluoroethylene (PTFE) is an important dielectric and structural substrate for high-frequency, flexible, low-background, and other electronic systems because of its low dielectric loss, high electrical resistivity, low moisture absorption, chemical inertness, and thermal stability. However, its fluorine-rich surface, low surface energy, and weak boundary layer hinder metal nucleation and interfacial bonding, frequently leading to discontinuous film growth, high interfacial resistance, and premature delamination. This focused review summarizes recent progress in low-temperature plasma-assisted metallization of PTFE, with particular emphasis on the relationships among plasma activation, interface formation, electrical functionality, reliability, and manufacturability. The effects of plasma-induced physical etching, defluorination, radical generation, polar functionalization, weak-boundary-layer removal, and hydrophobic recovery are first discussed. Representative metallization routes are then reviewed, including direct physical vapor deposition, plasma-assisted electroless plating, plasma-induced grafting, metallic interlayers, ion implantation, and hybrid plasma-deposition processes. Particular attention is given to interface-strengthening mechanisms involving chemical bonding, mechanical interlocking, diffusion control, carbon-rich or graded transition regions, and interdiffusion. The key trade-offs among adhesion strength, conductor resistance, dielectric integrity, surface-modification stability, and mechanical or environmental reliability are further analyzed for electronic-substrate applications. Although metallic interlayers, ion implantation, and hybrid processes can provide more stable interfaces than plasma activation alone, challenges remain in controlling plasma-induced damage, surface aging, interfacial carbonization, and process reproducibility. Recent 2024–2026 studies further show that these interface technologies can translate into low-loss Cu/PTFE laminates, flexible circuits, integrated vacuum metallization stacks, and selectively patterned conductors. The relevance to low-power systems is therefore treated as one application context at the substrate/interconnect level rather than as evidence that PTFE metallization directly reduces circuit switching power.

  • Open Access

    Ni-Ion-Implantation-Assisted Ultrathin Interlayer for Cu/PI Metallization in Low-Power Electronics

    by Meiyan Chen, Yue Zhang, Xuan Liu, Li Zhong, Ke Yao, Xueping Geng, Jinru Ou, Deli Tang, Fanya Jin, Jun Zhou

    Reliable Cu/polyimide (PI) metallization requires strong interfacial adhesion while minimizing the thickness of the metallic adhesion layer. In this study, Ni ion implantation was combined with physical vapor deposition to construct an ultrathin Ni interlayer on a 25 μm-thick PI substrate. Three metallization schemes were compared: 20 nm Ni/2 μm Cu, 10 nm Ni/2 μm Cu, and Ni-ion-implanted PI/5 nm Ni/2 μm Cu. Ni ions were implanted at an energy of 5 keV and a fluence of 1 × 1014 ions cm−2. The implantation treatment decreased the water contact angle of PI from 75° to 64° and increased its surface free energy from 36.41 to 42.99 mJ m−2, primarily through an increase in the polar component. Surface observations showed uniformly distributed implantation-associated micro/nanostructures with characteristic dimensions of approximately 50–300 nm, which may provide additional nucleation and anchoring sites for the subsequently deposited Ni layer. Cross-sectional transmission electron microscopy showed an undulating, locally embedded Ni/PI interface, while elemental profiles were consistent with a gradual transition across the modified interfacial region. The Ni-ion-implanted sample with a 5 nm Ni interlayer exhibited an average 180° peel strength of 1.13 N mm−1, compared with 0.62 and 0.30 N mm−1 for the 20 and 10 nm Ni interlayers, respectively. It also showed the lowest measured sheet resistance of 3.25 mΩ sq−1. Taken together, these results suggest that, under the conditions examined, Ni ion implantation can support a reduction in deposited Ni thickness while maintaining or improving the adhesion and electrical performance of Cu/PI metallization.