Shiyu Bao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shiyu Bao has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Antonius J. F. Hoitink
Hydrology and Environmental Hydraulics Group, Wageningen University and Research, Wageningen, the Netherlands
4 shared publications Henk Jongbloed
Hydrology and Environmental Hydraulics Group, Wageningen University and Research, Wageningen, the Netherlands
4 shared publicationsJinhai Zheng
Hohai University, Nanjing, China
4 shared publications- Reinier Schrijvershof
Hydrology and Environmental Hydraulics Group, Wageningen University and Research, Wageningen, the Netherlands
4 shared publications Lei Xu
Hydrology and Environmental Hydraulics Group, Wageningen University and Research, Wageningen, the Netherlands
3 shared publications
Latest Publications
- Open Access
- 5 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Comment on egusphere-2026-5555
Accurate quantification of sediment transport in fluvial, estuarine and coastal environments depends on reliable estimates of suspended sediment concentrations (SSCs). While Acoustic Doppler Current Profilers (ADCPs) provide depth-resolved backscatter observations that have potential to become translated to SSC, conventional inversion techniques fundamentally depend on the assumption of homogeneous sediment concentration and acoustic scattering/attenuation properties along the acoustic beam. In stratified and hyperturbid conditions, this homogeneity may be compromised, even when the particle size distribution itself remains vertically stable. Strong sediment gradients trigger stratification that either amplifies signal strength at the lutocline or diminishes it by fine-sediment-induced viscous attenuation, possibly invalidating this assumption. To assess whether the assumption of homogeneous sediment properties remains valid under hyperturbid conditions, we propose an a priori diagnostic based on the shape of the acoustic backscatter profile. Using changepoint detection, we identify slope breaks in acoustic profiles, which indicate transitions in the effective acoustic regime. These transitions likely indicate a breakdown of the homogeneity assumptions underlying acoustic backscatter inversion techniques. We apply the diagnostic to ADCP measurements (approximately 2 m above the bed) collected in an engineered navigation channel of the Ems Estuary, spanning SSCs of 0.1–100 g L-1, this upper limit corresponding to hyperturbid conditions. Validation against in-situ water samples confirms that profiles without detected changepoints (Type 1) yield reliable SSC estimates, even at concentrations up to ~20 g L-1. In contrast, Type 2 profiles exhibit pronounced spikes or slope breaks in the backscatter profiles that may reflect range-dependent acoustic sediment properties. This variation decouples the observed backscatter from a simple, range-invariant relationship with concentration. As a result, the inversion algorithm fails to accurately invert backscatter to concentration, leading to erroneous and unphysical SSC estimates that deviate significantly from in-situ water samples. The proposed diagnostic provides a simple step to flag unreliable profiles and support targeted sampling and interpretation in challenging hyperturbid environments, enabling more reliable estimation of suspended sediment concentrations and associated sediment transport fluxes.
- 5 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessComment on egusphere-2026-5555
Accurate quantification of sediment transport in fluvial, estuarine and coastal environments depends on reliable estimates of suspended sediment concentrations (SSCs). While Acoustic Doppler Current Profilers (ADCPs) provide depth-resolved backscatter observations that have potential to become translated to SSC, conventional inversion techniques fundamentally depend on the assumption of homogeneous sediment concentration and acoustic scattering/attenuation properties along the acoustic beam. In stratified and hyperturbid conditions, this homogeneity may be compromised, even when the particle size distribution itself remains vertically stable. Strong sediment gradients trigger stratification that either amplifies signal strength at the lutocline or diminishes it by fine-sediment-induced viscous attenuation, possibly invalidating this assumption. To assess whether the assumption of homogeneous sediment properties remains valid under hyperturbid conditions, we propose an a priori diagnostic based on the shape of the acoustic backscatter profile. Using changepoint detection, we identify slope breaks in acoustic profiles, which indicate transitions in the effective acoustic regime. These transitions likely indicate a breakdown of the homogeneity assumptions underlying acoustic backscatter inversion techniques. We apply the diagnostic to ADCP measurements (approximately 2 m above the bed) collected in an engineered navigation channel of the Ems Estuary, spanning SSCs of 0.1–100 g L-1, this upper limit corresponding to hyperturbid conditions. Validation against in-situ water samples confirms that profiles without detected changepoints (Type 1) yield reliable SSC estimates, even at concentrations up to ~20 g L-1. In contrast, Type 2 profiles exhibit pronounced spikes or slope breaks in the backscatter profiles that may reflect range-dependent acoustic sediment properties. This variation decouples the observed backscatter from a simple, range-invariant relationship with concentration. As a result, the inversion algorithm fails to accurately invert backscatter to concentration, leading to erroneous and unphysical SSC estimates that deviate significantly from in-situ water samples. The proposed diagnostic provides a simple step to flag unreliable profiles and support targeted sampling and interpretation in challenging hyperturbid environments, enabling more reliable estimation of suspended sediment concentrations and associated sediment transport fluxes.
- Open Access
- 23 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-31
Fluid mud impacts on estuarine sediment import
In hyperturbid estuaries, fine sediment accumulation frequently generates fluid mud layers that pose major challenges to ecology and navigation. Few studies have addressed the relation between fluid mud and residual sediment transport mechanisms to date. Here, we present Acoustic Doppler Current Profiler (ADCP) and water-sampling observations from the hyperturbid Emden Fairway (Ems Estuary), collected under three river discharge conditions (45–200 m3 s-1), including two 13 h tidal-cycle surveys with full-depth suspended sediment concentration (SSC) profiles. The thickness of the fluid mud layers differed among surveys with contrasting discharge in the research area, exceeding 2 m at high discharge (200 m3 s-1), whereas no fluid mud was present at low discharge. When a thin fluid mud layer was present (∼1 m), the net landward sediment flux per unit width over around 12 h observation windows reached 200 t m-1, which is one order of magnitude larger than that measured when the fluid mud was absent. The presence of a fluid mud layer coincided with a two-layer estuarine circulation, and enhanced tidal pumping through elevated near-bed SSC, which both promote landward sediment transport. In contrast, when the fluid mud layer has retreated, the residual flow is seaward over the full water depth, likely due to a sediment-induced density gradient opposing that of salinity, weakening estuarine circulation. The net landward transport relies mainly on tidal pumping. During the highest-discharge survey, near-bed sediment-induced density gradients were larger than the salinity gradient, indicating that fluid mud is not merely passively advected but may exert a control on the near-bed residual flow. Our results show that resolving the full near-bed layer is essential for quantifying sediment transport and understanding the discharge-driven redistribution of sediment in hyperturbid estuaries.
- 23 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-31
Open AccessFluid mud impacts on estuarine sediment import
In hyperturbid estuaries, fine sediment accumulation frequently generates fluid mud layers that pose major challenges to ecology and navigation. Few studies have addressed the relation between fluid mud and residual sediment transport mechanisms to date. Here, we present Acoustic Doppler Current Profiler (ADCP) and water-sampling observations from the hyperturbid Emden Fairway (Ems Estuary), collected under three river discharge conditions (45–200 m3 s-1), including two 13 h tidal-cycle surveys with full-depth suspended sediment concentration (SSC) profiles. The thickness of the fluid mud layers differed among surveys with contrasting discharge in the research area, exceeding 2 m at high discharge (200 m3 s-1), whereas no fluid mud was present at low discharge. When a thin fluid mud layer was present (∼1 m), the net landward sediment flux per unit width over around 12 h observation windows reached 200 t m-1, which is one order of magnitude larger than that measured when the fluid mud was absent. The presence of a fluid mud layer coincided with a two-layer estuarine circulation, and enhanced tidal pumping through elevated near-bed SSC, which both promote landward sediment transport. In contrast, when the fluid mud layer has retreated, the residual flow is seaward over the full water depth, likely due to a sediment-induced density gradient opposing that of salinity, weakening estuarine circulation. The net landward transport relies mainly on tidal pumping. During the highest-discharge survey, near-bed sediment-induced density gradients were larger than the salinity gradient, indicating that fluid mud is not merely passively advected but may exert a control on the near-bed residual flow. Our results show that resolving the full near-bed layer is essential for quantifying sediment transport and understanding the discharge-driven redistribution of sediment in hyperturbid estuaries.
- Open Access
- 9 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Comment on egusphere-2026-5555
Accurate quantification of sediment transport in fluvial, estuarine and coastal environments depends on reliable estimates of suspended sediment concentrations (SSCs). While Acoustic Doppler Current Profilers (ADCPs) provide depth-resolved backscatter observations that have potential to become translated to SSC, conventional inversion techniques fundamentally depend on the assumption of homogeneous sediment concentration and acoustic scattering/attenuation properties along the acoustic beam. In stratified and hyperturbid conditions, this homogeneity may be compromised, even when the particle size distribution itself remains vertically stable. Strong sediment gradients trigger stratification that either amplifies signal strength at the lutocline or diminishes it by fine-sediment-induced viscous attenuation, possibly invalidating this assumption. To assess whether the assumption of homogeneous sediment properties remains valid under hyperturbid conditions, we propose an a priori diagnostic based on the shape of the acoustic backscatter profile. Using changepoint detection, we identify slope breaks in acoustic profiles, which indicate transitions in the effective acoustic regime. These transitions likely indicate a breakdown of the homogeneity assumptions underlying acoustic backscatter inversion techniques. We apply the diagnostic to ADCP measurements (approximately 2 m above the bed) collected in an engineered navigation channel of the Ems Estuary, spanning SSCs of 0.1–100 g L-1, this upper limit corresponding to hyperturbid conditions. Validation against in-situ water samples confirms that profiles without detected changepoints (Type 1) yield reliable SSC estimates, even at concentrations up to ~20 g L-1. In contrast, Type 2 profiles exhibit pronounced spikes or slope breaks in the backscatter profiles that may reflect range-dependent acoustic sediment properties. This variation decouples the observed backscatter from a simple, range-invariant relationship with concentration. As a result, the inversion algorithm fails to accurately invert backscatter to concentration, leading to erroneous and unphysical SSC estimates that deviate significantly from in-situ water samples. The proposed diagnostic provides a simple step to flag unreliable profiles and support targeted sampling and interpretation in challenging hyperturbid environments, enabling more reliable estimation of suspended sediment concentrations and associated sediment transport fluxes.
- 9 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessComment on egusphere-2026-5555
Accurate quantification of sediment transport in fluvial, estuarine and coastal environments depends on reliable estimates of suspended sediment concentrations (SSCs). While Acoustic Doppler Current Profilers (ADCPs) provide depth-resolved backscatter observations that have potential to become translated to SSC, conventional inversion techniques fundamentally depend on the assumption of homogeneous sediment concentration and acoustic scattering/attenuation properties along the acoustic beam. In stratified and hyperturbid conditions, this homogeneity may be compromised, even when the particle size distribution itself remains vertically stable. Strong sediment gradients trigger stratification that either amplifies signal strength at the lutocline or diminishes it by fine-sediment-induced viscous attenuation, possibly invalidating this assumption. To assess whether the assumption of homogeneous sediment properties remains valid under hyperturbid conditions, we propose an a priori diagnostic based on the shape of the acoustic backscatter profile. Using changepoint detection, we identify slope breaks in acoustic profiles, which indicate transitions in the effective acoustic regime. These transitions likely indicate a breakdown of the homogeneity assumptions underlying acoustic backscatter inversion techniques. We apply the diagnostic to ADCP measurements (approximately 2 m above the bed) collected in an engineered navigation channel of the Ems Estuary, spanning SSCs of 0.1–100 g L-1, this upper limit corresponding to hyperturbid conditions. Validation against in-situ water samples confirms that profiles without detected changepoints (Type 1) yield reliable SSC estimates, even at concentrations up to ~20 g L-1. In contrast, Type 2 profiles exhibit pronounced spikes or slope breaks in the backscatter profiles that may reflect range-dependent acoustic sediment properties. This variation decouples the observed backscatter from a simple, range-invariant relationship with concentration. As a result, the inversion algorithm fails to accurately invert backscatter to concentration, leading to erroneous and unphysical SSC estimates that deviate significantly from in-situ water samples. The proposed diagnostic provides a simple step to flag unreliable profiles and support targeted sampling and interpretation in challenging hyperturbid environments, enabling more reliable estimation of suspended sediment concentrations and associated sediment transport fluxes.
- Open Access
- 1 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-28
A priori diagnostic for acoustic backscatter inversion to suspended sediment concentration in hyperturbid estuaries
Accurate quantification of sediment transport in fluvial, estuarine and coastal environments depends on reliable estimates of suspended sediment concentrations (SSCs). While Acoustic Doppler Current Profilers (ADCPs) provide depth-resolved backscatter observations that have potential to become translated to SSC, conventional inversion techniques fundamentally depend on the assumption of homogeneous sediment concentration and acoustic scattering/attenuation properties along the acoustic beam. In stratified and hyperturbid conditions, this homogeneity may be compromised, even when the particle size distribution itself remains vertically stable. Strong sediment gradients trigger stratification that either amplifies signal strength at the lutocline or diminishes it by fine-sediment-induced viscous attenuation, possibly invalidating this assumption. To assess whether the assumption of homogeneous sediment properties remains valid under hyperturbid conditions, we propose an a priori diagnostic based on the shape of the acoustic backscatter profile. Using changepoint detection, we identify slope breaks in acoustic profiles, which indicate transitions in the effective acoustic regime. These transitions likely indicate a breakdown of the homogeneity assumptions underlying acoustic backscatter inversion techniques. We apply the diagnostic to ADCP measurements (approximately 2 m above the bed) collected in an engineered navigation channel of the Ems Estuary, spanning SSCs of 0.1–100 g L-1, this upper limit corresponding to hyperturbid conditions. Validation against in-situ water samples confirms that profiles without detected changepoints (Type 1) yield reliable SSC estimates, even at concentrations up to ~20 g L-1. In contrast, Type 2 profiles exhibit pronounced spikes or slope breaks in the backscatter profiles that may reflect range-dependent acoustic sediment properties. This variation decouples the observed backscatter from a simple, range-invariant relationship with concentration. As a result, the inversion algorithm fails to accurately invert backscatter to concentration, leading to erroneous and unphysical SSC estimates that deviate significantly from in-situ water samples. The proposed diagnostic provides a simple step to flag unreliable profiles and support targeted sampling and interpretation in challenging hyperturbid environments, enabling more reliable estimation of suspended sediment concentrations and associated sediment transport fluxes.
- 1 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-28
Open AccessA priori diagnostic for acoustic backscatter inversion to suspended sediment concentration in hyperturbid estuaries
Accurate quantification of sediment transport in fluvial, estuarine and coastal environments depends on reliable estimates of suspended sediment concentrations (SSCs). While Acoustic Doppler Current Profilers (ADCPs) provide depth-resolved backscatter observations that have potential to become translated to SSC, conventional inversion techniques fundamentally depend on the assumption of homogeneous sediment concentration and acoustic scattering/attenuation properties along the acoustic beam. In stratified and hyperturbid conditions, this homogeneity may be compromised, even when the particle size distribution itself remains vertically stable. Strong sediment gradients trigger stratification that either amplifies signal strength at the lutocline or diminishes it by fine-sediment-induced viscous attenuation, possibly invalidating this assumption. To assess whether the assumption of homogeneous sediment properties remains valid under hyperturbid conditions, we propose an a priori diagnostic based on the shape of the acoustic backscatter profile. Using changepoint detection, we identify slope breaks in acoustic profiles, which indicate transitions in the effective acoustic regime. These transitions likely indicate a breakdown of the homogeneity assumptions underlying acoustic backscatter inversion techniques. We apply the diagnostic to ADCP measurements (approximately 2 m above the bed) collected in an engineered navigation channel of the Ems Estuary, spanning SSCs of 0.1–100 g L-1, this upper limit corresponding to hyperturbid conditions. Validation against in-situ water samples confirms that profiles without detected changepoints (Type 1) yield reliable SSC estimates, even at concentrations up to ~20 g L-1. In contrast, Type 2 profiles exhibit pronounced spikes or slope breaks in the backscatter profiles that may reflect range-dependent acoustic sediment properties. This variation decouples the observed backscatter from a simple, range-invariant relationship with concentration. As a result, the inversion algorithm fails to accurately invert backscatter to concentration, leading to erroneous and unphysical SSC estimates that deviate significantly from in-situ water samples. The proposed diagnostic provides a simple step to flag unreliable profiles and support targeted sampling and interpretation in challenging hyperturbid environments, enabling more reliable estimation of suspended sediment concentrations and associated sediment transport fluxes.