Nannan Fu
Nannan Fu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- AnYao Liu
School of Engineering, The Australian National University 1 , Canberra, ACT 2601
1 shared publication Chang Sun
School of Photovoltaic and Renewable Energy Engineering, University of New South Wales 2 , Sydney, NSW 2052
1 shared publication- Daniel Macdonald
Australian National University
1 shared publication - Rabin Basnet
School of Engineering, The Australian National University 1 , Canberra, ACT 2601
1 shared publication - Sanjida Sabah
School of Engineering, The Australian National University 1 , Canberra, ACT 2601
1 shared publication Yichun Wang
LONGi Green Energy Technology Co., Ltd. 3 , Xi’an, Shaanxi 710018
1 shared publication
Latest Publications
- Open Access
- 18 November 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (19)
Gettering of chromium in silicon wafers by dielectric and doped poly-silicon films
The negative impact of metallic impurities in silicon solar cells can be mitigated by external gettering to films at the wafer surface. In this work, we examine the effectiveness and kinetics of chromium (Cr) gettering in Si wafers by dielectric films (silicon nitride and aluminum oxide) and by doped polycrystalline silicon (poly-Si) films in a poly-Si/SiOx passivating contact structure (commonly known as TOPCon). By tracking the loss of Cr from the silicon wafer bulk via carrier-lifetime measurements, we show that between 93% and 97% of Cr is gettered by silicon nitride (SiNx) and aluminum oxide (Al2O3) films at post-deposition anneal temperatures between 350 and 450 °C and by phosphorus-doped and boron-doped poly-Si films during the dopant diffusion step at 800 and 880 °C, respectively. For the dielectric films, simulations of the experimental Cr gettering kinetics show that the gettering rate is largely limited by the diffusivity of Cr in the silicon bulk for the case of SiNx, while the Al2O3 films present an additional blocking effect which further slows the gettering process. Modeling the gettering kinetics also allows the diffusivity of Cr in silicon to be estimated, confirming an existing expression for Cr diffusivity in silicon across a wide temperature range, when combined with data from the literature.
- 18 November 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (19)
Open AccessGettering of chromium in silicon wafers by dielectric and doped poly-silicon films
The negative impact of metallic impurities in silicon solar cells can be mitigated by external gettering to films at the wafer surface. In this work, we examine the effectiveness and kinetics of chromium (Cr) gettering in Si wafers by dielectric films (silicon nitride and aluminum oxide) and by doped polycrystalline silicon (poly-Si) films in a poly-Si/SiOx passivating contact structure (commonly known as TOPCon). By tracking the loss of Cr from the silicon wafer bulk via carrier-lifetime measurements, we show that between 93% and 97% of Cr is gettered by silicon nitride (SiNx) and aluminum oxide (Al2O3) films at post-deposition anneal temperatures between 350 and 450 °C and by phosphorus-doped and boron-doped poly-Si films during the dopant diffusion step at 800 and 880 °C, respectively. For the dielectric films, simulations of the experimental Cr gettering kinetics show that the gettering rate is largely limited by the diffusivity of Cr in the silicon bulk for the case of SiNx, while the Al2O3 films present an additional blocking effect which further slows the gettering process. Modeling the gettering kinetics also allows the diffusivity of Cr in silicon to be estimated, confirming an existing expression for Cr diffusivity in silicon across a wide temperature range, when combined with data from the literature.