PDPham Dinh Du

Pham Dinh Du

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pham Dinh Du has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis of MIL-53(Al, Fe) bimetallic hybrid material and its application of dye adsorption in aqueous solutions

    by Phạm Đình Dũ

    Metal-organic framework (MOF) materials, which contain mixtures of two or more metals and possess unique properties, offer numerous application opportunities. In this paper, the effect of the Al/Fe molar ratio in the synthesized mixture on the formation of the MOF structure of MIL-53(Al, Fe) material was investigated. The material was used as an adsorbent to remove methylene blue (MB) and rhodamine B (RB) from aqueous solutions. The results showed that the metal-organic framework was formed at different Al/Fe molar ratios, including 5/0, 5/1, 1/1, and 1/5, but hardly formed at the 0/5 ratio. At the ratio of 1/5, the obtained material exhibited high adsorption affinity for both MB and RB. The kinetics and isotherms of the adsorption of MB and RB on this sample were analyzed. The high adsorption capacity of MB and RB indicates that MIL-53(Al, Fe) bimetallic hybrid material is an excellent adsorbent for these dyes.

  • Open Access

    Tối ưu hóa hiệu suất chuyển hóa phenol bởi hydrogen peroxide trên xúc tác Cu/diatomite sử dụng thiết kế Box-Behnken

    by Thanh Danh Huỳnh, Dũ Phạm Đình

    Thiết kế Box-Behnken (BBD) đã được sử dụng để nghiên cứu ảnh hưởng của các thông số vận hành đến hiệu suất chuyển hóa phenol bởi H2O2 trên xúc tác Cu/diatomite. Các thông số đầu vào bao gồm nồng độ phenol (1000-2000 mg/L), pH (6–8), và thời gian phản ứng (60–180 phút). Ảnh hưởng của các thông số này đến độ chuyển hóa phenol được mô hình hóa và tối ưu hóa bằng phương pháp bề mặt đáp ứng dựa trên BBD. Phương pháp BBD đã chứng minh khả năng thiết lập một mô hình đa thức bậc hai có độ chính xác cao cho độ chuyển hóa phenol (R² > 0,99). Kết quả tối ưu hóa bằng phương pháp BBD cho thấy độ chuyển hóa đạt 95% trong các điều kiện tối ưu. Các điều kiện này bao gồm nồng độ phenol ban đầu là 1000 mg/L, pH ban đầu của dung dịch là 6,6 và thời gian phản ứng là 180 phút. Chất xúc tác cũng được thu hồi và tái sử dụng thông qua bốn chu kỳ liên tiếp. Kết quả cho thấy độ chuyển hóa phenol còn khoảng 47,1% sau bốn chu kỳ phản ứng tái chế.

  • Open Access

    Determination of clenbuterol by electrochemical method using a modified MIL-53(Al, Fe) electrode

    by Pham Dinh Du, Nguyen Quang Man, Dinh Quang Khieu

    This study presents a novel electrochemical sensing platform based on a glassy carbon electrode modified with a mixed-metal metal–organic framework, Materials Institute of Lavoisier (MIL)-53(Al, Fe), for the highly sensitive detection of clenbuterol (CLE). The MIL-53(Al, Fe) material was synthesized and thoroughly characterized by x-ray diffraction, Fourier transform infrared spectroscopy, scanning and transmission electron microscopy, and nitrogen adsorption–desorption analysis, confirming the preservation of the MIL-53 framework and a high specific surface area, with numerous accessible active sites. For the first time, MIL-53(Al, Fe) is shown to act as an efficient electrocatalyst for CLE oxidation, significantly improving electron-transfer kinetics via a proton-coupled electron-transfer mechanism. Compared with the bare electrode, the modified electrode demonstrates a markedly increased current response, enhanced sensitivity, and a low detection limit of 0.11 μM within a linear range of 0.40–4.59 μM. The sensor also exhibits excellent repeatability, stability, and selectivity against common interfering species. Practical applicability was confirmed by the successful detection of CLE in pork samples, with satisfactory recoveries of 94.0%–104.1%. This work highlights the potential of mixed-metal MIL-53-based electrodes as a reliable strategy for on-site monitoring of CLE, thereby improving food safety control and regulatory surveillance.

  • Open Access

    Determination of acetaminophen and theophylline in drug samples by electrochemical method using Fe/MCM-41 modified electrode

    by Huynh Thanh Danh, Nguyen Chi Bao, Pham Thi Huyen Thoa, Nguyen Quang Man, Pham Dinh Du, Dinh Quang Khieu

    In this study, we developed an electrochemical sensor based on an Fe/MCM-41 modified electrode for the simultaneous analysis of acetaminophen (AT) and theophylline (TP). The Fe/MCM-41 material was produced from diatomite silica and ferric chloride salts via a hydrothermal method. The synthesized material was characterized by XRD, SEM, TEM, EDX mapping, and nitrogen adsorption-desorption isotherms. Results showed that the Fe/MCM-41 maintained its mesoporous structure, high surface area, and uniform dispersion of Fe ions. Electrochemical tests revealed that the Fe/MCM-41 electrode exhibits superior electrocatalytic activity and higher current responses for both analytes than the bare electrode. The two oxidation peaks of AT and TP were distinctly separated, enabling simultaneous quantification of drugs with high selectivity. The peak current increased linearly with AT and TP concentrations from 0.50 to 14.15 µM, with detection limits of 0.430 and 0.350 µM, respectively. Notably, the sensor was successfully used to analyze pharmaceutical formulations containing one or both active substances, with satisfactory recoveries. The results confirm that the Fe/MCM-41 electrode is a promising sensing platform for the simultaneous analysis of AT and TP, opening new possibilities for pharmaceutical testing.

  • Evaluating Pb(II) adsorption capacity of aluminum terephthalate metal−organic framework

    by Pham Dinh Du

    Aluminum terephthalate metal−organic framework (MIL-53(Al)) was synthesized via the hydrothermal method. The influence of the molar ratio between AlCl 3 and terephthalic acid (TA), reaction temperature, and material-treated temperature was investigated. The resulting MIL-53(Al) synthesized with the AlCl 3 /TA molar ratio of 1:0.5 and the reaction temperature ranging from 120 to 200 °C exhibits high crystallinity. The thermal treatment of as-synthesized MIL-53(Al) at 450 °C for 8 h unblocked the pores via the decomposition of unreacted TA molecules and enlarged the surface area of the material (from 11.4 m 2 g −1 to 121.9 m 2 g −1 ), while increasing Pb(II) removal efficiency. The Pb(II) adsorption on calcined MIL-53(Al) occurs favourably at low temperatures (−1 . The Pb(II) adsorption efficiency of the material increases significantly when pH increases from 2 to 6. The mechanism of the adsorption process is also discussed.

  • Open Access

    Preparing and evaluating rhodamine B removal ability in aqueous solutions of copper oxide nanoparticles

    by Dinh Du Pham

    In this paper, nanostructured copper oxide materials were prepared in N’N-dimethylformamide solvent from Cu(NO3)2×3H2O and benzene-1,4-dicarboxylic acid precursors. The obtained copper oxide nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TG/dTG), nitrogen adsorption-desorption isotherms, scanning and transmission electron microscopy (SEM and TEM). At 120°C synthesis, the CuO crystalline phase was mainly formed, while at 180-220°C, the Cu2O and Cu crystalline phases were also formed in addition to the CuO crystalline phase. The adsorption or degradation ability based on H2O2/catalyst system of copper oxide nanoparticles for rhodamine B removal was also evaluated. The results showed that copper oxide nanoparticles had low adsorption capacity for rhodamine B, but high catalytic activity to decompose rhodamine B in aqueous solution with hydrogen peroxide as the oxidizing agent.


  • TỔNG HỢP VÀ ĐÁNH GIÁ KHẢ NĂNG HẤP PHỤ RHODAMINE B CỦA VẬT LIỆU KHUNG HỮU CƠ-KIM LOẠI NHÔM TEREPHTHALATE

    by Phạm Đình Dũ

    Trong bài báo này, vật liệu khung hữu cơ-kim loại nhôm terephthalate, còn gọi là MIL-53(Al), đã được tổng hợp bằng phương pháp nhiệt dung môi và được sử dụng làm chất hấp phụ để loại bỏ rhodamine B trong dung dịch nước. Ảnh hưởng của nhiệt độ xử lý vật liệu để loại bỏ các phân tử terephthalic acid không tham gia phản ứng đã được khảo sát. Vật liệu được đặc trưng bằng cách sử dụng phương pháp nhiễu xạ tia X, phân tích nhiệt trọng lượng, phổ hồng ngoại biến đổi Fourier, hiển vi điện tử quét và đẳng nhiệt hấp phụ-khử hấp phụ nitrogen. Kết quả cho thấy rằng MIL-53(Al) mới tổng hợp có hình dạng hạt gạo với chiều dài khoảng 0,3 mm và diện tích bề mặt riêng lớn (1028,3 m2/g). Việc nung để loại bỏ các phân tử terephthalic acid còn mắc kẹt lại trong khung mạng làm tăng độ tinh thể, nhưng lại làm giảm đáng kể diện tích bề mặt riêng của vật liệu. Cấu trúc khung hữu cơ-kim loại vẫn duy trì ở nhiệt độ xử lý tại 450 °C. Khả năng hấp phụ để loại bỏ rhodamine B trong dung dịch nước của MIL-53(Al) cũng được đánh giá thông qua mô hình đẳng nhiệt Freundlich và Langmuir. Mô hình Freundlich biểu hiện sự tương thích với dữ liệu hấp phụ hơn mô hình Langmuir. Dung lượng hấp phụ cực đại xác định theo mô hình Langmuir là 17,04 mg/g.

  • Open Access

    Loại bỏ Rhodamine B trong dung dịch nước bằng MIL-53(Al) pha tạp Zn/Fe

    by Đình Dũ Phạm

    In this paper, Zn/Fe-doped MIL-53(Al) and MIL-53(Al) were synthesized by solvothermal method in N’N-dimethylformamide. The material was characterized using XRD, FT-IR, TG, EDX, SEM, and nitrogen adsorption/desorption isotherms. This material’s catalytic adsorption was evaluated via its removal efficiency of rhodamine B (RB) from aqueous solution. The results show that doping with Zn is not favorable for the MIL-53 structure formed, while the material structure is almost unaffected when doping with Fe. But, MIL-53(Al, Fe) has higher adsorption capacity and catalytic activity than the other material samples. It shows that RB was completely removed after 240 minutes of the reaction on MIL-53(Al, Fe) catalyst at 60 °C (10 mg/L RB, 1.0 g/L of the catalyst, 0.192 M H2O2, pH 7). The decomposition reaction of RB by H2O2 on MIL-53(Al, Fe) occurs in a heterogeneous Fenton-like process. Trong bài báo này, MIL-53(Al) và MIL-53(Al) pha tạp Zn/Fe đã được tổng hợp bằng phương pháp nhiệt dung môi trong N’N-dimethylformamide. Vật liệu được đặc trưng bằng cách sử dụng XRD, FT-IR, TG, EDX, SEM và đẳng nhiệt hấp phụ-khử hấp phụ nitrogen. Hoạt tính hấp phụ-xúc tác của vật liệu đã được đánh giá thông qua hiệu suất loại bỏ rhodamine B (RB) từ dung dịch nước. Kết quả cho thấy rằng sự pha tạp với Zn không thuận lợi cho sự hình thành cấu trúc MIL-53, trong khi đó, cấu trúc vật liệu hầu như không bị ảnh hưởng khi pha tạp với Fe. MIL-53(Al, Fe) có khả năng hấp phụ cũng như hoạt tính xúc tác cao hơn các mẫu vật liệu còn lại. RB được loại bỏ hoàn toàn sau 240 phút phản ứng trên xúc tác MIL-53(Al, Fe) ở 60 °C (RB 10 mg/L; vật liệu 1,0 g/L; H2O2 0,192 M; pH 7). Phản ứng phân hủy RB bởi H2O2 trên MIL-53(Al, Fe) xảy ra theo kiểu Fenton dị thể.

  • Open Access

    Removal of Pb(II) from Aqueous Solutions with Manganese Oxide-Modified Diatomite

    by Huynh Thanh Danh, Nguyen Thi Truc Ly, Vanthan Nguyen, Dinh Quang Khieu, Pham Dinh Du

    In the present work, natural diatomite modified with manganese oxide (MnO2) was prepared via direct redox reaction with KMnO4 and HCl. The product was characterized by using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray, and nitrogen adsorption-desorption isotherms. It was found that the nanorod manganese oxide was highly dispersed onto the diatomite porous matrix. The specific surface area of the obtained manganese oxide/diatomite ([ ]) is larger than that of natural diatomite ([ ]). It was utilized to remove Pb(II) in aqueous solutions. It exhibits an excellent Pb(II) adsorption capacity. The adsorption data fits well with the pseudo-second-order kinetics model, and the adsorption process is endothermic and spontaneous with an activation energy of 41.56 kJ mol−1 and follows the Freundlich isotherm model. The Mn/diatomite adsorption capacity for Pb(II) is 81.42 mg g−1, calculated with the Langmuir model. In addition, the adsorption mechanism of Pb(II) onto Mn/diatomite is also addressed.


  • Co-assembled hybrid of carbon nanodots and molecular fluorophores for efficient solar-driven water evaporation

    by Nguyen Thi Nhat Hang, Nguyen Van Canh, Nguyen Hiep Hoa, Pham Dinh Du, Phuoc Huu Le, Vanthan Nguyen