Pierre Romanet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pierre Romanet has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
- Jean-Paul Ampuero
Université Côte d’Azur, IRD, CNRS, Observatoire de la Côte d’Azur, Géoazur, Valbonne, France
7 shared publications - Marco Maria Scuderi
Dipartimento di Scienze della Terra, La Sapienza Università di Roma, Rome, Italy
7 shared publications - Frédéric Cappa
Université Côte d'Azur, CNRS, Observatoire de la Côte d'Azur, IRD, Géoazur
4 shared publications - Harsha S. Bhat
Laboratoire de Géologie Ecole Normale Supérieure CNRS‐UMR 8538 PSL University Paris France
3 shared publications - Junle Jiang
School of Geosciences, The University of Oklahoma
3 shared publications Marco M. Scuderi
Department of Earth Sciences, La Sapienza University of Rome, Piazzale Aldo Moro 5, 11, Roma, Italy, 00185
3 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (21)
Shallow Slip Deficit: An Intrinsic Property of Continental Earthquakes, Slightly Enhanced by Fault Maturity
A depletion of earthquake slip in the shallow crust (shallow coseismic slip deficit, or coseismic SSD) has been observed on <30, Mw ≥ 6 continental earthquakes, and attributed to the immaturity of the ruptured faults. We question the factors that contribute to the coseismic SSD. We built the largest earthquake source model database available to date, with 1078 models providing coseismic SSD estimates on 163 Mw ≥ 6, various slip mode, continental earthquakes worldwide since 1990. We also built a database providing their fault maturity parameters (initiation age, net displacement, length, slip rate). Our combined earthquake‐fault analysis reveals that coseismic SSD of continental earthquakes, whatever their slip mode, is primarily controlled by the relation between their magnitude and peak slip depth, and, to a much lesser extent, by the fault maturity. A model where earthquake slip produces zero stress drop on the shallow velocity strengthening fault section reproduces the data well.
- 4 November 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (21)
Open AccessShallow Slip Deficit: An Intrinsic Property of Continental Earthquakes, Slightly Enhanced by Fault Maturity
A depletion of earthquake slip in the shallow crust (shallow coseismic slip deficit, or coseismic SSD) has been observed on <30, Mw ≥ 6 continental earthquakes, and attributed to the immaturity of the ruptured faults. We question the factors that contribute to the coseismic SSD. We built the largest earthquake source model database available to date, with 1078 models providing coseismic SSD estimates on 163 Mw ≥ 6, various slip mode, continental earthquakes worldwide since 1990. We also built a database providing their fault maturity parameters (initiation age, net displacement, length, slip rate). Our combined earthquake‐fault analysis reveals that coseismic SSD of continental earthquakes, whatever their slip mode, is primarily controlled by the relation between their magnitude and peak slip depth, and, to a much lesser extent, by the fault maturity. A model where earthquake slip produces zero stress drop on the shallow velocity strengthening fault section reproduces the data well.
- Open Access
- 10 July 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
A Divide-and-Conquer Strategy for Fast Elastodynamic Simulation of Earthquakes and Aseismic Slip on Fault Networks
Simulating long-term, fully dynamic sequences of earthquakes and aseismic slip (SEAS) on complex fault networks remains computationally demanding due to the cost of resolving elastodynamic fault interactions. Although high-performance computing environments make such simulations more feasible, the associated expense remains substantial, particularly for multicycle simulations and long-term deformation. Consequently, many studies adopt quasi-dynamic formulations that approximate elastodynamic wave-mediated stress transfer through radiation damping, enabling longer simulations at reduced computational cost. Here, we present an efficient numerical framework for fully elastodynamic SEAS simulations on complex fault networks. The method, presented here in a 2D antiplane setting, follows a divide-and-conquer strategy in which elastodynamic self-effects and fault-to-fault interaction effects are treated separately and evaluated using boundary integral formulations tailored to each interaction type. Self-interactions along planar fault segments are efficiently computed through a nonreplicating spectral boundary integral formulation, eliminating spurious contributions from periodic fault images. Stress transfer across arbitrarily oriented faults is instead resolved using a fully dynamic space–time boundary integral representation accelerated by hierarchical matrices (H matrices). This decomposition defines a general formulation that is readily extensible beyond the present 2D antiplane setting. A central methodological advance is the introduction of a selective H-matrix compression strategy based on the faultwise assembly of independent binary trees, enabling targeted low-rank approximation of long-range fault-to-fault interactions while preserving near-field accuracy and excluding self-interaction effects from the hierarchical structure. Additional computational gains arise from physics-informed truncation of elastodynamic histories, including mode-dependent time-window truncation for spectral self-effects and causality-based truncation for interaction kernels. Benchmark multifault simulations validate the accuracy of the formulation against reference uncompressed space–time solutions. The method reduces the computational and memory complexity of interaction calculations from O(N3) to O(N2logN), yielding up to two orders of magnitude reduction in computation time and approximately one order of magnitude reduction in memory usage for typical problem sizes (∼3·103 degrees of freedom). These gains enable fully dynamic SEAS simulations on complex fault networks using workstation-class hardware.
- 10 July 2026
- Published by Seismological Society of America (SSA) in Bulletin of the Seismological Society of America
Open AccessA Divide-and-Conquer Strategy for Fast Elastodynamic Simulation of Earthquakes and Aseismic Slip on Fault Networks
Simulating long-term, fully dynamic sequences of earthquakes and aseismic slip (SEAS) on complex fault networks remains computationally demanding due to the cost of resolving elastodynamic fault interactions. Although high-performance computing environments make such simulations more feasible, the associated expense remains substantial, particularly for multicycle simulations and long-term deformation. Consequently, many studies adopt quasi-dynamic formulations that approximate elastodynamic wave-mediated stress transfer through radiation damping, enabling longer simulations at reduced computational cost. Here, we present an efficient numerical framework for fully elastodynamic SEAS simulations on complex fault networks. The method, presented here in a 2D antiplane setting, follows a divide-and-conquer strategy in which elastodynamic self-effects and fault-to-fault interaction effects are treated separately and evaluated using boundary integral formulations tailored to each interaction type. Self-interactions along planar fault segments are efficiently computed through a nonreplicating spectral boundary integral formulation, eliminating spurious contributions from periodic fault images. Stress transfer across arbitrarily oriented faults is instead resolved using a fully dynamic space–time boundary integral representation accelerated by hierarchical matrices (H matrices). This decomposition defines a general formulation that is readily extensible beyond the present 2D antiplane setting. A central methodological advance is the introduction of a selective H-matrix compression strategy based on the faultwise assembly of independent binary trees, enabling targeted low-rank approximation of long-range fault-to-fault interactions while preserving near-field accuracy and excluding self-interaction effects from the hierarchical structure. Additional computational gains arise from physics-informed truncation of elastodynamic histories, including mode-dependent time-window truncation for spectral self-effects and causality-based truncation for interaction kernels. Benchmark multifault simulations validate the accuracy of the formulation against reference uncompressed space–time solutions. The method reduces the computational and memory complexity of interaction calculations from O(N3) to O(N2logN), yielding up to two orders of magnitude reduction in computation time and approximately one order of magnitude reduction in memory usage for typical problem sizes (∼3·103 degrees of freedom). These gains enable fully dynamic SEAS simulations on complex fault networks using workstation-class hardware.
- Open Access
- 10 July 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (14)
Fault Geometrical Control on Fault Slip: Experimental Validation of Theoretical Models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress‐drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high‐resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double‐bends to self‐similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is, scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- 10 July 2026
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 53 (14)
Open AccessFault Geometrical Control on Fault Slip: Experimental Validation of Theoretical Models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress‐drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high‐resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double‐bends to self‐similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is, scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- Open Access
- 30 April 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (5)
Fault Volume Digital Twin to Reproduce the Full Slip Spectrum, Scaling, and Statistical Laws
Seismological and geodetic observations of fault zones reveal diverse slip dynamics, scaling, and statistical laws. Existing mechanisms explain some but not all of these behaviors. We show that incorporating an off‐fault damage zone—characterized by distributed fractures surrounding a main fault—can reproduce many key features observed in seismic and geodetic data. We model a 2D shear fault zone in which off‐fault cracks follow power‐law size and density distributions, and are oriented either optimally or parallel to the main fault. All fractures follow rate‐and‐state friction with parameters enabling slip instabilities. We do not introduce spatial heterogeneities in frictional properties. Using quasi‐dynamic boundary integral simulations accelerated by hierarchical matrices, we simulate slip dynamics and analyze events produced both on and off the main fault. Despite spatially uniform frictional properties, we observe a natural continuum from slow to fast ruptures, as seen in nature. Our simulations reproduce the Omori law, inverse Omori law, Gutenberg‐Richter scaling, and moment‐duration scaling. We observe seismicity localizing toward the main fault before nucleation of main‐fault events. During slow slip events (SSEs), off‐fault seismicity migrates in patterns resembling fluid diffusion fronts, despite the absence of fluids. We show that tremors, very low‐frequency earthquakes, low frequency earthquakes, SSEs, and earthquakes can all emerge naturally within this fault volume framework, making it an ideal digital twin for testing hypotheses, performing ground‐truth inversions, and probing mechanical properties inaccessible with natural observations.
- 30 April 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (5)
Open AccessFault Volume Digital Twin to Reproduce the Full Slip Spectrum, Scaling, and Statistical Laws
Seismological and geodetic observations of fault zones reveal diverse slip dynamics, scaling, and statistical laws. Existing mechanisms explain some but not all of these behaviors. We show that incorporating an off‐fault damage zone—characterized by distributed fractures surrounding a main fault—can reproduce many key features observed in seismic and geodetic data. We model a 2D shear fault zone in which off‐fault cracks follow power‐law size and density distributions, and are oriented either optimally or parallel to the main fault. All fractures follow rate‐and‐state friction with parameters enabling slip instabilities. We do not introduce spatial heterogeneities in frictional properties. Using quasi‐dynamic boundary integral simulations accelerated by hierarchical matrices, we simulate slip dynamics and analyze events produced both on and off the main fault. Despite spatially uniform frictional properties, we observe a natural continuum from slow to fast ruptures, as seen in nature. Our simulations reproduce the Omori law, inverse Omori law, Gutenberg‐Richter scaling, and moment‐duration scaling. We observe seismicity localizing toward the main fault before nucleation of main‐fault events. During slow slip events (SSEs), off‐fault seismicity migrates in patterns resembling fluid diffusion fronts, despite the absence of fluids. We show that tremors, very low‐frequency earthquakes, low frequency earthquakes, SSEs, and earthquakes can all emerge naturally within this fault volume framework, making it an ideal digital twin for testing hypotheses, performing ground‐truth inversions, and probing mechanical properties inaccessible with natural observations.
- Open Access
- 17 April 2026
- Published by Wiley
Fault geometrical control on fault slip: experimental validation of theoretical models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress-drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high-resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double-bends to self-similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- 17 April 2026
- Published by Wiley
Open AccessFault geometrical control on fault slip: experimental validation of theoretical models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress-drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high-resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double-bends to self-similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- Open Access
- 8 April 2026
- Published by Wiley
Fault geometrical control on fault slip: experimental validation of theoretical models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress-drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high-resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double-bends to self-similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- 8 April 2026
- Published by Wiley
Open AccessFault geometrical control on fault slip: experimental validation of theoretical models
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress-drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high-resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double-bends to self-similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- Open Access
- 30 March 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (4)
A Rate‐and‐State Friction Based Criterion for the Probability of Earthquake Fault Jumps
Geometrical complexities in natural fault zones, such as steps and gaps, pose a challenge in seismic hazard studies as they can act as obstacles to seismic ruptures. In this study, we propose a criterion, which is based on the rate‐and‐state equation, to estimate the efficiency of an earthquake rupture to jump between two spatially disconnected faults. The proposed jump criterion is tested using a 2D quasi‐dynamic numerical simulations of the seismic cycle. The criterion successfully predicts fault jumps where the simpler Coulomb stress change calculation fails to do so. The criterion includes the Coulomb stress change as a parameter but is also dependent on other important parameters among which is the absolute normal stress on the fault the rupture jumps to. Based on the criterion, the maximum jump distance increases with decreasing absolute normal stress, that is, as the rupture process occurs closer to the Earth's surface or as pore pressure increases. The criterion implies that earthquakes can jump to arbitrary large distances at the Earth's surface if the normal stress is allowed to go to zero, underscoring the potential for large jump distances (i.e., >5 km). We further propose a probabilistic framework to estimate the likelihood of rupture jumps by accounting for uncertainties in fault geometry and earthquake source parameters. Additionally to its role into seismic hazard assessment, this criterion could complement Coulomb stress change maps with those of triggered slip‐rates on receiver faults due to quasi‐instantaneous stress perturbations, as well as estimates of jump probabilities accounting for parameter uncertainties.
- 30 March 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 131 (4)
Open AccessA Rate‐and‐State Friction Based Criterion for the Probability of Earthquake Fault Jumps
Geometrical complexities in natural fault zones, such as steps and gaps, pose a challenge in seismic hazard studies as they can act as obstacles to seismic ruptures. In this study, we propose a criterion, which is based on the rate‐and‐state equation, to estimate the efficiency of an earthquake rupture to jump between two spatially disconnected faults. The proposed jump criterion is tested using a 2D quasi‐dynamic numerical simulations of the seismic cycle. The criterion successfully predicts fault jumps where the simpler Coulomb stress change calculation fails to do so. The criterion includes the Coulomb stress change as a parameter but is also dependent on other important parameters among which is the absolute normal stress on the fault the rupture jumps to. Based on the criterion, the maximum jump distance increases with decreasing absolute normal stress, that is, as the rupture process occurs closer to the Earth's surface or as pore pressure increases. The criterion implies that earthquakes can jump to arbitrary large distances at the Earth's surface if the normal stress is allowed to go to zero, underscoring the potential for large jump distances (i.e., >5 km). We further propose a probabilistic framework to estimate the likelihood of rupture jumps by accounting for uncertainties in fault geometry and earthquake source parameters. Additionally to its role into seismic hazard assessment, this criterion could complement Coulomb stress change maps with those of triggered slip‐rates on receiver faults due to quasi‐instantaneous stress perturbations, as well as estimates of jump probabilities accounting for parameter uncertainties.
- Open Access
- 26 March 2026
- Published by Wiley
Fault geometrical control on fault slip: experimental validation of
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress-drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high-resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double-bends to self-similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- 26 March 2026
- Published by Wiley
Open AccessFault geometrical control on fault slip: experimental validation of
Slip distribution along tectonic faults is recognized as highly heterogeneous across all spatial scales and is linked to various aspects of the earthquake cycle, such as aftershock density and stress-drop variability. A key factor often considered to control slip heterogeneity is the fault geometry, which is typically nonplanar at various scales, yet experimental validation of theoretical models is lacking. We present high-resolution measurements of slip from controlled laboratory earthquakes along interfaces with various geometries, from simple double-bends to self-similar rough faults. We find that local slip gradients are proportional to fault curvature. For rough faults, we show both experimentally and analytically that slip exhibits a fractal character that is scaled by a power law, although with a different exponent than the fault geometry. These results provide the first experimental evidence that slip variability can be predicted from known fault geometry, offering new insights into the mechanical processes governing earthquake rupture.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
The future Community-Driven SCEC SEAS Code Comparisons for [1] Three-Dimensional fluid injection and [2] a Two-Dimensional dipping fault with variable normal traction.
The Statewide California Earthquake Center (SCEC) sequence of earthquake and aseismic slip (SEAS) group has regularly developed and published benchmarks along the years to follow recent development in the modeling of sequences of aseismic slip and earthquakes, as well as progress in numerical methods. These benchmarks, as well as the results from the different groups are publicly available at: https://strike.scec.org/cvws/seas/. It provides both reference solutions for code verification and a framework for systematic comparison of different modeling approaches. Every group is welcomed to join this Community driven comparison.Recent efforts have focused on adding physics to better reproduce earthquake cycle by considering 2-dimensional fault (Jiang et al., 2022), improve our understanding of fluid injection processes (Lambert et al., 2025), and the effect of free surface and dipping fault (Erickson et al., 2023).To follow up these developments, the SCEC SEAS group is designing two new benchmarks, that will be released to the community soon:[1] A generalization of our benchmark about fluid injection (BP6) from a 2-dimensional domain to 3-dimensional domain. In this benchmark pore fluid diffuses along a 2-dimensional fault, modifying the effective normal traction through one-way hydromechanical coupling. The fluid is injected for 10 hours on a rate strengthening faut and then shut off. The benchmark is designed to admit an analytical formulation for pore fluid diffusion while avoiding numerical singularities that may occurred with point source injection. For this reason, fluid is injected along a Gaussian profile.[2] An updated version of our previous dipping fault benchmark (BP3), in a two-dimensional medium with a free surface. Previous version assumed that the normal traction along the fault was constant. This is obviously a strong assumption, because the normal traction should increase with depth. However, this has proven to be difficult to simulate numerically as the system is going stiffer with lower normal traction. This benchmark therefore aims at providing a more realistic simulation of a dipping fault with a free surface by introducing depth dependent normal traction while also testing the ability of different numerical code to circumvent the problem of stiffness. This benchmark will be a joint benchmark with CRESCENT (Cascadia Region Earthquake Science Center).This contribution will present the design of these forthcoming benchmarks and will provide an opportunity for the community to discuss about future benchmarks and directions for SEAS code comparison efforts.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessThe future Community-Driven SCEC SEAS Code Comparisons for [1] Three-Dimensional fluid injection and [2] a Two-Dimensional dipping fault with variable normal traction.
The Statewide California Earthquake Center (SCEC) sequence of earthquake and aseismic slip (SEAS) group has regularly developed and published benchmarks along the years to follow recent development in the modeling of sequences of aseismic slip and earthquakes, as well as progress in numerical methods. These benchmarks, as well as the results from the different groups are publicly available at: https://strike.scec.org/cvws/seas/. It provides both reference solutions for code verification and a framework for systematic comparison of different modeling approaches. Every group is welcomed to join this Community driven comparison.Recent efforts have focused on adding physics to better reproduce earthquake cycle by considering 2-dimensional fault (Jiang et al., 2022), improve our understanding of fluid injection processes (Lambert et al., 2025), and the effect of free surface and dipping fault (Erickson et al., 2023).To follow up these developments, the SCEC SEAS group is designing two new benchmarks, that will be released to the community soon:[1] A generalization of our benchmark about fluid injection (BP6) from a 2-dimensional domain to 3-dimensional domain. In this benchmark pore fluid diffuses along a 2-dimensional fault, modifying the effective normal traction through one-way hydromechanical coupling. The fluid is injected for 10 hours on a rate strengthening faut and then shut off. The benchmark is designed to admit an analytical formulation for pore fluid diffusion while avoiding numerical singularities that may occurred with point source injection. For this reason, fluid is injected along a Gaussian profile.[2] An updated version of our previous dipping fault benchmark (BP3), in a two-dimensional medium with a free surface. Previous version assumed that the normal traction along the fault was constant. This is obviously a strong assumption, because the normal traction should increase with depth. However, this has proven to be difficult to simulate numerically as the system is going stiffer with lower normal traction. This benchmark therefore aims at providing a more realistic simulation of a dipping fault with a free surface by introducing depth dependent normal traction while also testing the ability of different numerical code to circumvent the problem of stiffness. This benchmark will be a joint benchmark with CRESCENT (Cascadia Region Earthquake Science Center).This contribution will present the design of these forthcoming benchmarks and will provide an opportunity for the community to discuss about future benchmarks and directions for SEAS code comparison efforts.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Linking off-fault strain to rate-and-state friction nucleation: Implications for monitoring precursory velocity changes
Precursory signals preceding large earthquakes are commonly attributed to the acceleration of localized slip during rupture nucleation, yet their spatial expression in the surrounding medium remains poorly constrained. Here, we model the evolution of off-fault strain during earthquake nucleation governed by rate-and-state friction. Our results show that strain accumulates gradually during the early nucleation phase and then accelerates sharply, exceeding a threshold of ε ~ 10-7—comparable to natural strain levels and detectable by modern strainmeters and geodetic instruments—tens to hundreds of days before instability, depending on the uncertainty in the characteristic slip distance Dc and effective normal stress σeff. Approximately 0.7 times the nucleation duration prior to failure, the strained region (ε > 10-7) extends to distances exceeding one nucleation length away from the fault and spans most of its entire length. We further show that σeff controls both the magnitude and spatial distribution of strain, whereas Dc primarily influences the spatial extent of the strained region. Assuming a representative value for the sensitivity of seismic velocity changes to strain (η ≈ 104), the predicted strain amplitudes correspond to ~0.1%-100% changes in seismic velocity, well above the detection limits of ambient-noise monitoring. A comparison between strain footprints and seismic wavelengths further suggests that analysis of short-period noise (T = 0.1 - 1 s) would be most favorable for identifying these precursory signals. Together, these findings directly link nucleation theory to observable field-scale precursors and provide a physics-based framework for precursor identification in natural fault systems.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessLinking off-fault strain to rate-and-state friction nucleation: Implications for monitoring precursory velocity changes
Precursory signals preceding large earthquakes are commonly attributed to the acceleration of localized slip during rupture nucleation, yet their spatial expression in the surrounding medium remains poorly constrained. Here, we model the evolution of off-fault strain during earthquake nucleation governed by rate-and-state friction. Our results show that strain accumulates gradually during the early nucleation phase and then accelerates sharply, exceeding a threshold of ε ~ 10-7—comparable to natural strain levels and detectable by modern strainmeters and geodetic instruments—tens to hundreds of days before instability, depending on the uncertainty in the characteristic slip distance Dc and effective normal stress σeff. Approximately 0.7 times the nucleation duration prior to failure, the strained region (ε > 10-7) extends to distances exceeding one nucleation length away from the fault and spans most of its entire length. We further show that σeff controls both the magnitude and spatial distribution of strain, whereas Dc primarily influences the spatial extent of the strained region. Assuming a representative value for the sensitivity of seismic velocity changes to strain (η ≈ 104), the predicted strain amplitudes correspond to ~0.1%-100% changes in seismic velocity, well above the detection limits of ambient-noise monitoring. A comparison between strain footprints and seismic wavelengths further suggests that analysis of short-period noise (T = 0.1 - 1 s) would be most favorable for identifying these precursory signals. Together, these findings directly link nucleation theory to observable field-scale precursors and provide a physics-based framework for precursor identification in natural fault systems.